Label: ['NTi Audio']

Products with this attribute (28 total)

MiniLINK is a USB PC interface and Windows software option for the ML1 and DL1 audio analyzers. MiniLINK is already included with the AL1 Acoustilyzer. MiniLINK displays results, transfers data to PC, and remotely operates the ML1 Minilyzer, AL1 Acoustilyzer and DL1 Digilyzer. MiniLINK is an upgradeable option for all existing and new ML1 Minilyzers and DL1 Digilyzers. It allows documentation, data acquisition and control of all ML1, AL1 and DL1 functions.

Attenuator for generating high quality microphone level signals.This attenuator can be utilized to generate high quality microphone level signals. It increases the signal-noiseratio for low level Minirator signals by -40dB.You may use the adapter in conjunction with the Minirator MR2 or MR-PRO. The impedances of the adapter are matched for this use only! For safety reasons the adapter includes a pin 1 - fuse.The output impedance of the Minirator -40dB adapter is 200 Ohm balanced.

General purpose microphone, with class 1 frequency response and metal diaphragm.The microphones are 48V phantom powered and include an electronic data sheet. The Automated Sensor Detection (ASD) of the XL2 Analyzer automatically reads this data, i.e. the microphone model and calibration data. This promotes faster setup and ensures accurate measurements.The microphone bodies contain the preamplifier. They combine high dynamic range and wide frequency range with low noise. These measurement microphones connect via the ASD Cable to the XL2 Audio and Acoustic Analyzer, e.g. for measurements at remote locations or to reduce acoustic reflections.

MR2 Analog Audio Generator provides a full set of analog audio test signals for set-up, maintenance and monitoring of professional audio equipment. Hand-held, using battery or external DC power supply, the generator is ergonomically packaged and has an intuitive user interface.

NTI MR-PRO Analog Audio Generator provides a complete set of analog audio test signals for the most demanding audio professional. In addition to all MR2 features, MR-PRO adds load impedance and phantom voltage measurements, user wave files, higher performance and cable test capability. Hand-held, using battery or external DC power supply, the generator offers a complete range of capabilities for a professional.Set-up and Maintain Audio Systems: Use the Minirator to set up PA systems and monitors. Generate pink noise and optimize the frequency response of your system with the XL2 Analyzer. Confirm that all speakers have the same polarity with the polarity signal. To optimize delay speakers, generate the delay test signal, and measure the actual acoustic delay with the XL2 Analyzer.The Minirator signal generator and XL2 Analyzer are valuable instruments for fast troubleshooting of the audio signal path throughout the installation. The MR-PRO verifies phantom power supply of microphones, checks XLRLR cables and measures load impedance and balance.Verify Speech Intelligibility of Life Safety Systems: The Minirator MR-PRO generates the STIPA test signal for system line inputs in conjunction with speech intelligibility measurements performed by the XL2 analyzer according to IEC 60268-16.Impedance Testing of 70V/100V Distributed Systems: The MR-PRO measures the impedance and power rating of distributed speaker systems. Deviations from the expected result identify problems such as bad connections, incorrect tap connections or short circuits. Use the optional 70V/100V Protection Adapter for safe operation.Insulation Measurement for Building Acoustics: The Minirator MR-PRO generates band-limited pink noise for sound insulation, absorption, privacy and articulation index measurements. The following test signals support your applications: 32 Hz - 16 kHz in individual octave bands 20 Hz - 20 kHz in individual third-octave bands

NTi Audio Minstruments Digital Audio Set includes Digilyzer DL1, Digirator DR2 and accessories.

NTi Audio ML1 Minilyzer Handheld Audio Analyzer

Protects Minirator MR-PRO against accidentally applied voltages during impedance or power testing at distributed 70V/100V speaker systems.The adapter includes bidirectional crowbar limiters and two fuses. The fuses will be blown if high voltage sare accidentally applied, thus protecting the Minirator MR-PRO output against damages.The MR-PRO 70V/100V Protective Adapter does not prevent users from coming into touch with high voltages. In some failure cases, e.g. one fuse blown, parts of the MR-PRO may carry hazardous high voltage(e.g. USB interface, RCA connector).Use the following fuse type only:500mA/250V Fast, 5x20mm.Using any other fuse type than specified may cause damages or malfunctions of the MR-PRO, which are not covered by NTIs warranty terms.

Public address systems in buildings like airports, railway stations, shopping centers or concert halls have to clearly inform persons in danger about escape information and directions in case of an emergency,. The NTi Audio STI-PA analyzers measure the speech intelligibility of emergency systems in accordance with the standard 2003 IEC 60268-16.The STI-PA function measures the speech intelligibility of public announcement systems according the latest revision of IEC 60268-16:2003 standard. The XL2 displays the measurement results as STI or as CIS results, accompanied by the individual levels and modulation indices of the seven octave bands. The measurement results are acquired from the dedicated STI-PA test signal, generated by the

State-of the-art DSP technology allows NTI to provide customers with a pocket-size Audio Analyzer giving a comprehensive set of measurement functions, combined with excellent specifications at a very competitive price. As a commitment to our customers, our investment in expertise has enabled us to provide a design not just of decent but excellent and superior specifications in all aspects such as a level accuracy of <0.1 dB, residual THD+N of < -85 dB (0.005 %), fast measurement speed with more than 3 readings per second and more.ConnectionsA balanced XLR as well as an unbalanced RCA connector are available to connect the test signal to the device. The system automatically detects the input source and activates the appropriate mode. A headphone output allows monitoring of the input signal at a normalized level for aural diagnostics. To further simplify operation a built-in microphone is fitted that is automatically activated as soon as the polarity test function is selected.

STI-PA

The Exel Set is an acoustics set with the Class 2 M4261 Measurement Microphone. The Exel Set consists of the XL2 Acoustic Analyzer, the M4261 microphone, the XL2 ASD cable, the XL2 Power Supply, the MR-PRO Minirator, the MR-PRO Power Supply, the MR-PRO Cable Test Plug, and the XL2 System Case.The M4261 is a calibrated, omni-directional class 2 measurement microphone running from 48V Phantom power. It shows excellent linearity over a wide dynamic range from 27 dB SPL up to 144 dB SPL.The hand-held XL2 Analyzer is a powerful Sound Level Meter, a professional Acoustic Analyzer and a precision Audio Analyzer all in one instrument. Easy operation and countless applications distinguish this quality Swiss product. The intuitive navigation and flexible user interface assist in simplifying every task.

The M4261 is a calibrated, omni-directional class 2 measurement microphone running from 48V Phantom power. It shows excellent linearity over a wide dynamic range from 27 dB SPL up to 144 dB SPL.The microphones are 48V phantom powered and include an electronic data sheet. The Automated Sensor Detection (ASD) of the XL2 Analyzer automatically reads this data, i.e. the microphone model and calibration data. This promotes faster setup and ensures accurate measurements.The microphone bodies contain the preamplifier. They combine high dynamic range and wide frequency range with low noise. The M4261 microphones connect via the ASD Cable to the XL2 Audio and Acoustic Analyzer, e.g. for measurements at remote locations or to reduce acoustic reflections.

The XL2-RCASE Ever-ready Pouch protects the XL2 during transport and operation. With its convenient belt-clip, the XL2 can be kept close by for those tasks requiring both hands. The Ever-ready Pouch allows operation of the XL2 fitted in the pouch.

The AL1 Acoustilyzer and the ML1 Minilyzer are based on the same hardware platform with different specific firmware installed. The Acoustilyzer firmware package is available for our existing Minilyzer customers as a crossgrade firmware. The Acoustilyzer firmware can be loaded onto the ML1 using the MiniLINK PC software. Thereafter customers can upload either the Acoustilyzer and Minilyzer firmware as desired.

The ASD Cable allows for extended connections of the NTi Audio measurement microphones. It supports the transfer of the electronic data sheet from the microphone to the XL2 Analyzer. The ASD technology offers the electronic data sheet transfer for cable length up to 20 meters (64 feet).

The Digilyzer DL1 is a powerful but easy to use digital audio analyzer. Testing, monitoring and troubleshooting digital audio interfaces is fast and straight forward using this compact tool. Virtually all digital audio formats including ADAT and sampling frequencies up to 96 kHz are supported. With features like the DL1 unique integrity check, the integrated speaker, event & data logging, audio lens and many more digital audio becomes transparent and easy to debug.

The Digirator DR2 is a reference grade digital audio signal generator with transformer balanced AES3, S/PDIF, TOS-Link and ADAT outputs.Beside a comprehensive set of audio test signals, the DR2 also supports surround sound test sequences for verification and adjustment of professional Dolby Digital, Dolby E and DTS installations. The internal low jitter clock generator can be synchronized to AES3, DARS, Word Clock and Video signals. Measurement of channel transparency, channel propagation delay and sample frequency is supported.

The Exel Acoustic Set contains all instruments and accessories for precise acoustic measurements and analog audio testing. The set is available with the M2211 - Enhanced Performance measurement microphone with Class 1 frequency response according IEC 61672. The System Case protects the complete set during transport.

The Extended Acoustic Pack offers additional features for sound level- and acoustic measurements:

The hand-held XL2 Analyzer is a powerful Sound Level Meter, a professional Acoustic Analyzer and a precision Audio Analyzer all in one instrument. Easy operation and countless applications distinguish this quality Swiss product. Get the job done, on time! The instrument is ready to measure literally seconds after you press the power button. The intuitive navigation and flexible user interface assist in simplifying every task. The XL2 provides an extensive range of measurement functions.The XL2 is developed according to user needs, and provides reliable measurement solutions for sound system installations, noise control, architectural acoustics, evacuation systems, live events, quality inspection and occupational health and safety. The best is not always the most expensive. The XL2 Audio and Acoustic Analyzer provides top-class performance with excellent value for money. You will receive an instrument exactly tailored to your needs for less than you expect.Focus on your core skills and let the XL2 provide you with the reliable measurement data. This instrument is the benchmark that allows you to be the professional that you are. The robust design and verifiable measurement methods pair to help you perform better. The XL2 is the reference instrument in audio and acoustic measurement.The XL2 also comes with the M4261, which is a calibrated, omni-directional class 2 measurement microphone running from 48V Phantom power. It shows excellent linearity over a wide dynamic range from 27 dB SPL up to 144 dB SPL.PLEASE NOTE: This product contains Lithium Ion Batteries. Due to FAA regulation this item is restricted to ground transportation in the lower 48 contiguous states and cannot ship to Alaska, Hawaii or Puerto Rico.

The NTI 600 000 439 Projector PRO software displays the XL2 screen in real-time via USB on the connected Windows or Mac computer. The software toolbar enables control of the XL2 with the mouse and keyboard. The background color turns from green to red according to the user-defined limits. Projector PRO offers the ability to retrieve measurement data from the XL2 without interruption to the measurement process. The entire file system of the XL2 is available while the XL2 is measuring. The complete data records of a previous day can be transferred to a local computer with drag & drop.All Projector PRO settings can be saved in a software profile. For daily event monitoring, e.g. in a neighborhood bar monitoring project, the sound level monitoring starts automatically when the computer starts up and ends again with the shutdown. The XL2 Sound Level Meter stores the measurement data for later documentation. For precise data recording, the time of the XL2 sound level meter is automatically synchronized with the computer time. The sound level meter can then be kept in a protected place (such as a locked cupboard) - it no longer requires any keypresses.The XL2 Projector PRO software is a free download for all registered XL2 customers. Required is a computer with Windows 7, 8, 10 or higher or Mac OS 10.8 or higher.The "XL View" window presents sound levels in large size on the connected computer screen. Users may select to view one, two or three sound pressure levels. Exceeding levels are presented with a pre-warning amber or alarming red color. To access the XL View, a Projector PRO Option must be installed on the XL2 Sound Level Meter.

The NTI TalkBox is an active acoustic signal generator for speech intelligibility measurements in evacuation and announcement systems, as well as for level alignment of teleconference or any audio system incorporating a microphone input. It allows performing complete end-to-end evaluation of the speech intelligibility STIPA from the talker's microphone to the listener's ears.It Simulates a human talker (60 dBA @ 1 meter according to IEC 60268-16) with the STIPA test signal and spoken messages. Further it provides a wide range of test signals like sine, pink noise, white noise and delay.The TalkBox features human head-like dimensions and is based on a solid-state-generator. It replays the STIPA test signal with a precise frequency response, individually equalized for each TalkBox, also ensuring best performance through the internal amplifier and the precision loudspeaker. A variety of supplied or user-defined test signals may be precisely output for different alignment applications.Designed to the latest quality standards for reliable measurements results. It offers unmatched signal purity with a distortion lower than 1% over the complete frequency range from 100 Hz to 10 kHz. This ensures the repeatable and precise verification of the speech intelligibility STI.Applications for TalkBox: Evacuation Systems Installed Sound AV-Installations

The NTi Audio hand-held XL2 Analyzer is a powerful Sound Level Meter, a professional Acoustic Analyzer, a precision Audio Analyzer and a comprehensive Vibration Meter in one instrument. Easy operation and countless applications distinguish this quality Swiss product.Applications: <li>Life Safety Systems</li><li>Noise Measurement</li><li>Live Sound</li><li>Industrial and Aerospace</li><li>Room & Building Acoustics</li><li>Quality Control</li><li>Electroacoustic Installations</li>Made by Professionals for Professionals Focus on your core skills and let the XL2 provide you with the reliable measurement data. This instrument is the benchmark that allows you to be the professional that you are. The robust design and verifiable measurement methods pair to help you perform better. The XL2 is the reference instrument in audio and acoustic measurement.Switch on - Good to go Get the job done, on time! The instrument is ready to measure literally seconds after you press the power button. The intuitive navigation and flexible user interface assist in simplifying every task. The XL2 provides an extensive range of measurement functions.Ready for any Challenge The XL2 is developed according to user needs, and provides reliable measurement solutions for sound system installations, noise control, architectural acoustics, evacuation systems, live events, quality inspection and occupational health and safety. Discover an instrument you can trust for specialist applications.Incomparable Value The XL2 Audio and Acoustic Analyzer provides top-class performance with excellent value for money. You will receive an instrument exactly tailored to your needs for less than you expect.Data Analysis and Reporting The XL2 stores all data onto the SD card for direct transfer to the computer. Data reports and log files are stored in plain text format, which can be opened with any text editor (Notepad, Wordpad, etc). The data is tab-delimited, so dropping the .txt file into a spreadsheet application will conveniently show the results in columns. The sound level meter may additionaly record the audio data as a WAV-file.

The soft pouch protects your NTI Generator against shock and dust. With its convenient belt-clip, you can keep your Generator close by for those tasks that require both hands.

The XL2 Analyzer forms the unique combination of a state-of-the-art Sound Level Meter, a comprehensive Acoustic Analyzer as well as a powerful Audio Analyzer. A range of measurement microphones with an electronic data sheet are available to suit your requirements.Besides being an advanced, integrating Sound Level Meter, the XL2 measures RTA and FFT high-resolution spectra, RT60 Reverberation Time, Polarity, Delay and THD+N. Optional features are speech intelligibility STIPA, extended acoustics functions, cinema calibration, pass/fail analysis and remote measurement acquisition. The Type Approval Option upgrades the instrument to the XL2-TA, a type approved sound level meter.

The XL2 Audio and Acoustic Analyzer in combination with the Limit Light offers a turnkey solution for live sound monitoring. The sound level limits are set in the XL2. The Limit Light provides a pre-warning with an orange light and indicates that levels have been exceeded with a red light.The Limit Light connects directly to the XL2 Analyzer. It represents the actually measured levels on a color display for simple confirmation that the sound level monitored is within the limits. This provides the front-of-house engineer with a personal eye-catching level indication. The light indication is dimmable for applications in dark environments.

This compact system case provides the professional transport protection for work in the field. It offers space for the handheld instruments, cables and connectors.