Attribute Values: 0-9

0.04 Amp at 120 Volt, 0.02 Amp at 277 Volt
0.04 cents
0.04 gph
0.04 Hexagon Crystals
0.04 hp
0.04 in
0.04 IN
0.04 in.
0.04 Inch Aluminum
0.04 Inch Aluminum Material; Baked Aluminum Finish; 1 Gang(S); UL, CSA Approval; Box, Device Mounting; Lever Operator Type; (1) Toggle Switch Device Type; Vertical Mounting Position; Environmental Conditions Wet Location; Inclusion (4) Screws, Gasket
0.04 Inch Brass
0.04 Inch Hydroformed Aluminum
0.04 Inch Thick Die Formed, 1-Piece, Aluminum Eye Ball, Die Cast Aluminum Baffle
0.04 Inch Thk Polished Brass Material; #3 Polished Mirror Finish; (3) Toggle Switch Configuration; 3 Gang(S); Standard Designated Size; Application Residential; Size 6.375 Inch Width X 4.5 Inch Height
0.04 kgm
0.04 Lb
0.04 lb
0.04 lb (18.14 g)
0.04 lbs
0.04 lbs (0.0 kg)
0.04 lbs per EA
0.04 lbs per PR
0.04 mA
0.04 MHz
0.04 mm
0.04 Mpa
0.04 Ohms
0.04 Ounces
0.04 oz
0.04 oz (0 lb)
0.04 oz (1.14 g)
0.04 oz.
0.04 pA
0.04 pounds
0.04 Pounds
0.04 to 1.4% vol
0.04 uf
0.04 W
0.04 x 0.04 x 0.04 inches
0.04 x 8 x 0.6 inches
0.04"
0.04" (0.89mm)
0.04" (1.02 mm)
0.04" (1.02mm)
0.04" in
0.04% Carbon (C), 0.50% Silicon (Si), 1.20% Manganese (Mn), 0.012% Phosphorus (P), 0.010% Sulphur (S)
0.04"
0.04''
0.04, 0.16, 0.46
0.04...0.3m
0.04...4m
0.04/0.02 Amp
0.040
0.040 EVA Tray Material, Bag of 12
0.040 in
0.040 in [Min], 1 1/2 in [Max]
0.040 in H2O (10.0 Pa)
0.040 in.
0.040 inch
0.040 Kg
0.040 LB
0.040 lbs
0.040"
0.040" (1.02 mm)
0.040" (1.02mm)
0.040" (1.02mm) Dia
0.040" (1.0mm)
0.040" Diameter 2-Flute 1/8" Shank Miniature Blue Series Carbide End Mills
0.040" ID x 0.085" OD x 0.023" Wall Silcon? Medical Tubing
0.040" L x 0.024" W (1.02mm x 0.61mm)
0.040" RECT, STEEL, ASME 00
0.040" RECT, STEEL, ASME K
0.040" to 0.200"
0.040" ~ 0.050" (1.02mm ~ 1.27mm)
0.040" ~ 0.060" (1.02mm ~ 1.52mm)
0.040" ~ 0.070" (1.02mm ~ 1.78mm)
0.040" ~ 0.080" (1.02mm ~ 2.03mm)
0.040" ~ 0.100" (1.02mm ~ 2.54mm)
0.040" ~ 0.110" (1.02mm ~ 2.79mm)
0.040" (1.02mm)
0.040" (1.02mm) Dia
0.040" Diameter 2-Flute Miniature Solid Carbide End Mill TiAlN Coated
0.040" ~ 0.041" (1.02mm ~ 1.04mm)
0.040" ~ 0.050" (1.02mm ~ 1.27mm)
0.040" ~ 0.060" (1.02mm ~ 1.52mm)
0.040" ~ 0.080" (1.02mm ~ 2.03mm)
0.040" ~ 0.100" (1.02mm ~ 2.54mm)
0.040"" (1.02mm)
0.040"" (1.02mm) Dia
0.040"" L x 0.024"" W (1.02mm x 0.61mm)
0.040"" ~ 0.060"" (1.02mm ~ 1.52mm)
0.040,ER70S-6/ER70S-6H4,National,Standard,NS,Plus?-115,Copper,Coated,Carbon,Steel,MIG,Welding,Wire,45#,3/4,Masonite,Spool
0.0400
0.0400 in
0.04000
0.040000
0.040008499999999995
0.04001
0.04002
0.04003