MONSTER TOOL/GWS Products

All products from this brand (13474 total)

2.0mm Diameter Straight Flute Carbide JL Drill, 140? Split Point, Bright Finish, 19mm Flute, 45mm Long 19mm Flute Length,2.0mm Shank,45mm OAL GWS/Monster straight flute jobber length drills are made from C-2 Sub-Micron Grain Carbide With 10% Cobalt Content. Straight flute drills offer pinpoint accuracy and reamer quality finishes. The straight flute design combined with a 140? split point eases even the most difficult drilling jobs. Dual purpose: can also be used as a salvage or reclaim tool. For the most demanding applications, straight flute drills perform consistently in the harshest environments. Made in the USA. GWS/Monster Tool Part #470-400787

2.3mm Diameter Straight Flute Right Hand Cut Solid Carbide Chucking Reamer 13mm Flute Length, .0905\

2.5mm 2 Flute Ball Nose Single End Carbide End Mill, AlTiN Coated, Regular Length, 9.5mmFlute, 39MM OAL 9.5MM LOC,3MM SHANK,39MM OAL 30? helix, right hand spiral, right hand cut, 2 flute ball nose center cutting single end general purpose solid carbide end mill with plain cylindrical shank. Made from C-2 grade sub-micron grain carbide with 10% cobalt content. 2 flute end mills allow for extra chip clearance in heavy cuts with high material removal rates. Applicable for slotting, plunging and profiling in steels, alloys, cast iron, aluminum and non-ferrous materials. Made in the USA. GWS/Monster Tool Part #221-001425B

2.5mm 2 Flute Ball Nose Single End Carbide End Mill, Bright Finish, Regular Length, 9.5mmFlute, 39MM OAL 9.5MM LOC,3MM SHANK,39MM OAL 30? helix, right hand spiral, right hand cut, 2 flute ball nose center cutting single end general purpose solid carbide end mill with plain cylindrical shank. Made from C-2 grade sub-micron grain carbide with 10% cobalt content. 2 flute end mills allow for extra chip clearance in heavy cuts with high material removal rates. Applicable for slotting, plunging and profiling in steels, alloys, cast iron, aluminum and non-ferrous materials. Made in the USA. GWS/Monster Tool Part #221-001425

2.5mm 2 Flute Ball Nose Single End Carbide End Mill, TiCN Coated, Regular Length, 9.5mmFlute, 39MM OAL 9.5MM LOC,3MM SHANK,39MM OAL 30? helix, right hand spiral, right hand cut, 2 flute ball nose center cutting single end general purpose solid carbide end mill with plain cylindrical shank. Made from C-2 grade sub-micron grain carbide with 10% cobalt content. 2 flute end mills allow for extra chip clearance in heavy cuts with high material removal rates. Applicable for slotting, plunging and profiling in steels, alloys, cast iron, aluminum and non-ferrous materials. Made in the USA. GWS/Monster Tool Part #221-001425C

2.5mm 2 Flute Ball Nose Single End Carbide End Mill, TiN Coated, Regular Length, 9.5mmFlute, 39MM OAL 9.5MM LOC,3MM SHANK,39MM OAL 30? helix, right hand spiral, right hand cut, 2 flute ball nose center cutting single end general purpose solid carbide end mill with plain cylindrical shank. Made from C-2 grade sub-micron grain carbide with 10% cobalt content. 2 flute end mills allow for extra chip clearance in heavy cuts with high material removal rates. Applicable for slotting, plunging and profiling in steels, alloys, cast iron, aluminum and non-ferrous materials. Made in the USA. GWS/Monster Tool Part #221-001425A

2.5mm 2 Flute Square End Single End Carbide End Mill, Bright Finish, Regular Length, 9.5mmFlute, 39MM OAL 9.5MM LOC,3MM SHANK,39MM OAL 30? helix, right hand spiral, right hand cut, 2 flute square end center cutting single end general purpose solid carbide end mill with plain cylindrical shank. Made from C-2 grade sub-micron grain carbide with 10% cobalt content. 2 flute end mills allow for extra chip clearance in heavy cuts with high material removal rates. Applicable for slotting, plunging and profiling in steels, alloys, cast iron, aluminum and non-ferrous materials. Made in the USA. GWS/Monster Tool Part #204-001301

2.5mm 2 Flute Square End Single End Carbide End Mill, TiAlN Coated, Regular Length, 9.5mmFlute, 39MM OAL 9.5MM LOC,3MM SHANK,39MM OAL 30? helix, right hand spiral, right hand cut, 2 flute square end center cutting single end general purpose solid carbide end mill with plain cylindrical shank. Made from C-2 grade sub-micron grain carbide with 10% cobalt content. 2 flute end mills allow for extra chip clearance in heavy cuts with high material removal rates. Applicable for slotting, plunging and profiling in steels, alloys, cast iron, aluminum and non-ferrous materials. Made in the USA. GWS/Monster Tool Part #204-001297B

2.5mm 2 Flute Square End Single End Carbide End Mill, TiCN Coated, Regular Length, 9.5mmFlute, 39MM OAL 9.5MM LOC,3MM SHANK,39MM OAL 30? helix, right hand spiral, right hand cut, 2 flute square end center cutting single end general purpose solid carbide end mill with plain cylindrical shank. Made from C-2 grade sub-micron grain carbide with 10% cobalt content. 2 flute end mills allow for extra chip clearance in heavy cuts with high material removal rates. Applicable for slotting, plunging and profiling in steels, alloys, cast iron, aluminum and non-ferrous materials. Made in the USA. GWS/Monster Tool Part #204-001297C

2.5mm 2 Flute Square End Single End Carbide End Mill, TiN Coated, Regular Length, 9.5mmFlute, 39MM OAL 9.5MM LOC,3MM SHANK,39MM OAL 30? helix, right hand spiral, right hand cut, 2 flute square end center cutting single end general purpose solid carbide end mill with plain cylindrical shank. Made from C-2 grade sub-micron grain carbide with 10% cobalt content. 2 flute end mills allow for extra chip clearance in heavy cuts with high material removal rates. Applicable for slotting, plunging and profiling in steels, alloys, cast iron, aluminum and non-ferrous materials. Made in the USA. GWS/Monster Tool Part #204-001297A

2.5mm 4 Flute Ball Nose Single End Carbide End Mill, AlTiN Coated, Regular Length, 9.5mm Flute Length, 39mm OAL 9.5MM LOC,3MM SHANK,39MM OAL 30? helix, right hand spiral, right hand cut, 4 flute ball nose center cutting single end general purpose carbide end mill with plain cylindrical shank. C-2 grade sub-micron grain carbide with 10% cobalt content. Four flute design offers increased core diameter which minimizes tool deflection & improves accuracy. For profiling, slotting, production milling & finishing applications in a wide range of ferrous metals, including stainless steels & high temp alloys. Made in the USA. GWS/Monster Tool Part #223-001425B

2.5mm 4 Flute Ball Nose Single End Carbide End Mill, Bright Finish, Regular Length, 9.5mm Flute Length, 39mm OAL 9.5MM LOC,3MM SHANK,39MM OAL 30? helix, right hand spiral, right hand cut, 4 flute ball nose center cutting single end general purpose carbide end mill with plain cylindrical shank. C-2 grade sub-micron grain carbide with 10% cobalt content. Four flute design offers increased core diameter which minimizes tool deflection & improves accuracy. For profiling, slotting, production milling & finishing applications in a wide range of ferrous metals, including stainless steels & high temp alloys. Made in the USA. GWS/Monster Tool Part #223-001425

2.5mm 4 Flute Ball Nose Single End Carbide End Mill, TiCN Coated, Regular Length, 9.5mm Flute Length, 39mm OAL 9.5MM LOC,3MM SHANK,39MM OAL 30? helix, right hand spiral, right hand cut, 4 flute ball nose center cutting single end general purpose carbide end mill with plain cylindrical shank. C-2 grade sub-micron grain carbide with 10% cobalt content. Four flute design offers increased core diameter which minimizes tool deflection & improves accuracy. For profiling, slotting, production milling & finishing applications in a wide range of ferrous metals, including stainless steels & high temp alloys. Made in the USA. GWS/Monster Tool Part #223-001425C

2.5mm 4 Flute Ball Nose Single End Carbide End Mill, TiN Coated, Regular Length, 9.5mm Flute Length, 39mm OAL 9.5MM LOC,3MM SHANK,39MM OAL 30? helix, right hand spiral, right hand cut, 4 flute ball nose center cutting single end general purpose carbide end mill with plain cylindrical shank. C-2 grade sub-micron grain carbide with 10% cobalt content. Four flute design offers increased core diameter which minimizes tool deflection & improves accuracy. For profiling, slotting, production milling & finishing applications in a wide range of ferrous metals, including stainless steels & high temp alloys. Made in the USA. GWS/Monster Tool Part #223-001425A

2.5mm 4 Flute Square End Single End Carbide End Mill, AlTiN Coated, Regular Length, 9.5mm Flute Length, 39mm OAL 9.5MM LOC,3MM SHANK,39MM OAL 30? helix, right hand spiral, right hand cut, 4 flute square end center cutting single end general purpose carbide end mill with plain cylindrical shank. C-2 grade sub-micron grain carbide with 10% cobalt content. Four flute design offers increased core diameter which minimizes tool deflection & improves accuracy. For profiling, slotting, production milling & finishing applications in a wide range of ferrous metals, including stainless steels & high temp alloys. Made in the USA. GWS/Monster Tool Part #206-001302

2.5mm 4 Flute Square End Single End Carbide End Mill, Bright Finish, Regular Length, 9.5mm Flute Length, 39mm OAL 9.5MM LOC,3MM SHANK,39MM OAL 30? helix, right hand spiral, right hand cut, 4 flute square end center cutting single end general purpose carbide end mill with plain cylindrical shank. C-2 grade sub-micron grain carbide with 10% cobalt content. Four flute design offers increased core diameter which minimizes tool deflection & improves accuracy. For profiling, slotting, production milling & finishing applications in a wide range of ferrous metals, including stainless steels & high temp alloys. Made in the USA. GWS/Monster Tool Part #206-001300

2.5mm 4 Flute Square End Single End Carbide End Mill, TiCN Coated, Regular Length, 9.5mm Flute Length, 39mm OAL 9.5MM LOC,3MM SHANK,39MM OAL 30? helix, right hand spiral, right hand cut, 4 flute square end center cutting single end general purpose carbide end mill with plain cylindrical shank. C-2 grade sub-micron grain carbide with 10% cobalt content. Four flute design offers increased core diameter which minimizes tool deflection & improves accuracy. For profiling, slotting, production milling & finishing applications in a wide range of ferrous metals, including stainless steels & high temp alloys. Made in the USA. GWS/Monster Tool Part #206-001300C

2.5mm 4 Flute Square End Single End Carbide End Mill, TiN Coated, Regular Length, 9.5mm Flute Length, 39mm OAL 9.5MM LOC,3MM SHANK,39MM OAL 30? helix, right hand spiral, right hand cut, 4 flute square end center cutting single end general purpose carbide end mill with plain cylindrical shank. C-2 grade sub-micron grain carbide with 10% cobalt content. Four flute design offers increased core diameter which minimizes tool deflection & improves accuracy. For profiling, slotting, production milling & finishing applications in a wide range of ferrous metals, including stainless steels & high temp alloys. Made in the USA. GWS/Monster Tool Part #206-001300A

2.5mm CARBIDE AlTiN STUB DRILL 21mm LOC, 45mm OAL RH SPIRAL RH CUT SOLID CARBIDE 135?POINT MONSTER #460-400984B Solid C-2 Grade Premium Sub-Micron Grain Carbide with 10% Cobalt. Right Hand Cut, 15? Right Hand Spiral. Diameter Tolerance is +0.0000/-0.0005\

2.5mm CARBIDE JOBBER DRILL 25mm LOC, 51mm OAL, 118?POINT SOLID CARBIDE JOBBER LENGTH DRILL MONSTER #450-400984 Solid C-2 Grade Premium Sub-Micro Grain Carbide with 10% Cobalt, Right Hand Cut, 25? Right Hand Spiral, Diameter Tolerance is +0.0000/-0.0005\

2.5mm Diameter APERTURE-4XD High Performance Carbide Drill, 140? 4-Facet Point, nACRo Coated, 12.5mm Flute, 38mm OAL 12.5mm Flute Length,3mm Shank,38mm OAL GWS/Monster 2 flute Aperture-4X carbide drills are made from C-2 Sub-Micron Grain Carbide With 10% Cobalt Content. Proprietary 140? drill point technology utilizes a perfected combination of facets, corner breaks, and edge prep to produce the strongest cutting action. nACRo coating provides unrivaled lubricity and temperature reduction. 4xD perfectly blends the rigidity of 3xD and the versatility of 5xD. This self-centering drill provides the fastest penetration and ultimate tool longevity. Made in the USA. GWS/Monster Tool Part #434-000984B

2.5mm Diameter Jobber Length Carbide Twist Drill, 118? Split Point, AlTiN Coated, 25mm Flute, 51mm OAL 25mm Flute Length,2.5mm Shank,51mm OAL GWS/Monster jobber length twist drills are made from C-2 Sub-Micron Grain Carbide With 10% Cobalt Content. 25? helix angle quickly evacuates chips and allows for increased feed rates. 118? split point for quick penetration without walking. The most versatile overall length lends this geometry to a multitude of uses. Optional AlTiN coating can increase feed rates by 40%. Made in the USA. GWS/Monster Tool Part #450-400984B

2.5mm Diameter Jobber Length Carbide Twist Drill, 118? Split Point, TiN Coated, 25mm Flute, 51mm OAL 25mm Flute Length,2.5mm Shank,51mm OAL GWS/Monster jobber length twist drills are made from C-2 Sub-Micron Grain Carbide With 10% Cobalt Content. 25? helix angle quickly evacuates chips and allows for increased feed rates. 118? split point for quick penetration without walking. The most versatile overall length lends this geometry to a multitude of uses. Optional AlTiN coating can increase feed rates by 40%. Made in the USA. GWS/Monster Tool Part #450-400984A

2.5mm Diameter Screw Machine Stub Length Carbide Drill, 135? Split Point, Bright Finish, 21mm Flute, 45mm OAL 21mm Flute Length,2.5mm Shank,46mm OAL GWS/Monster stub drills also known as screw machine or shorty drills are made from C-2 Sub-Micron Grain Carbide With 10% Cobalt Content. A relaxed 15? helix is designed for slower feed rates found on the most demanding jobs. 135? split point possesses the strength to pierce the hardest materials. One of the few drill designs capable for use on all six ISO material categories. Optional TiN & AlTiN coating can increase feed rates by 40%. Made in the USA. GWS/Monster Tool Part #460-400984

2.5mm Diameter Straight Flute Carbide JL Drill, 140? Split Point, AlTiN Coated, 21mm Flute, 46mm Long 21mm Flute Length,2.5mm Shank,46mm OAL GWS/Monster straight flute jobber length drills are made from C-2 Sub-Micron Grain Carbide With 10% Cobalt Content. Straight flute drills offer pinpoint accuracy and reamer quality finishes. The straight flute design combined with a 140? split point eases even the most difficult drilling jobs. Dual purpose: can also be used as a salvage or reclaim tool. For the most demanding applications, straight flute drills perform consistently in the harshest environments. Made in the USA. GWS/Monster Tool Part #470-400984B

2.5mm Diameter Straight Flute Carbide JL Drill, 140? Split Point, Bright Finish, 21mm Flute, 46mm Long 21mm Flute Length,2.5mm Shank,46mm OAL GWS/Monster straight flute jobber length drills are made from C-2 Sub-Micron Grain Carbide With 10% Cobalt Content. Straight flute drills offer pinpoint accuracy and reamer quality finishes. The straight flute design combined with a 140? split point eases even the most difficult drilling jobs. Dual purpose: can also be used as a salvage or reclaim tool. For the most demanding applications, straight flute drills perform consistently in the harshest environments. Made in the USA. GWS/Monster Tool Part #470-400984

2.8mm Diameter Straight Flute Right Hand Cut Solid Carbide Chucking Reamer 16mm Flute Length, .1102\

206-602820

20mm 2 Flute Ball Nose Single End Carbide End Mill, AlTiN Coated, Regular Length, 38mmFlute, 102MM OAL 38MM LOC,20MM SHANK,102MM OAL 30? helix, right hand spiral, right hand cut, 2 flute ball nose center cutting single end general purpose solid carbide end mill with plain cylindrical shank. Made from C-2 grade sub-micron grain carbide with 10% cobalt content. 2 flute end mills allow for extra chip clearance in heavy cuts with high material removal rates. Applicable for slotting, plunging and profiling in steels, alloys, cast iron, aluminum and non-ferrous materials. Made in the USA. GWS/Monster Tool Part #221-001600B

20mm 2 Flute Ball Nose Single End Carbide End Mill, Bright Finish, Regular Length, 38mmFlute, 102MM OAL 38MM LOC,20MM SHANK,102MM OAL 30? helix, right hand spiral, right hand cut, 2 flute ball nose center cutting single end general purpose solid carbide end mill with plain cylindrical shank. Made from C-2 grade sub-micron grain carbide with 10% cobalt content. 2 flute end mills allow for extra chip clearance in heavy cuts with high material removal rates. Applicable for slotting, plunging and profiling in steels, alloys, cast iron, aluminum and non-ferrous materials. Made in the USA. GWS/Monster Tool Part #221-001600

20mm 2 Flute Ball Nose Single End Carbide End Mill, TiCN Coated, Regular Length, 38mmFlute, 102MM OAL 38MM LOC,20MM SHANK,102MM OAL 30? helix, right hand spiral, right hand cut, 2 flute ball nose center cutting single end general purpose solid carbide end mill with plain cylindrical shank. Made from C-2 grade sub-micron grain carbide with 10% cobalt content. 2 flute end mills allow for extra chip clearance in heavy cuts with high material removal rates. Applicable for slotting, plunging and profiling in steels, alloys, cast iron, aluminum and non-ferrous materials. Made in the USA. GWS/Monster Tool Part #221-001600C

20mm 2 Flute Ball Nose Single End Carbide End Mill, TiN Coated, Regular Length, 38mmFlute, 102MM OAL 38MM LOC,20MM SHANK,102MM OAL 30? helix, right hand spiral, right hand cut, 2 flute ball nose center cutting single end general purpose solid carbide end mill with plain cylindrical shank. Made from C-2 grade sub-micron grain carbide with 10% cobalt content. 2 flute end mills allow for extra chip clearance in heavy cuts with high material removal rates. Applicable for slotting, plunging and profiling in steels, alloys, cast iron, aluminum and non-ferrous materials. Made in the USA. GWS/Monster Tool Part #221-001600A

20mm 2 Flute Square End Single End Carbide End Mill, Bright Finish, Regular Length, 38mmFlute, 102MM OAL 38MM LOC,20MM SHANK,102MM OAL 30? helix, right hand spiral, right hand cut, 2 flute square end center cutting single end general purpose solid carbide end mill with plain cylindrical shank. Made from C-2 grade sub-micron grain carbide with 10% cobalt content. 2 flute end mills allow for extra chip clearance in heavy cuts with high material removal rates. Applicable for slotting, plunging and profiling in steels, alloys, cast iron, aluminum and non-ferrous materials. Made in the USA. GWS/Monster Tool Part #204-001460

20mm 2 Flute Square End Single End Carbide End Mill, TiAlN Coated, Regular Length, 38mmFlute, 102MM OAL 38MM LOC,20MM SHANK,102MM OAL 30? helix, right hand spiral, right hand cut, 2 flute square end center cutting single end general purpose solid carbide end mill with plain cylindrical shank. Made from C-2 grade sub-micron grain carbide with 10% cobalt content. 2 flute end mills allow for extra chip clearance in heavy cuts with high material removal rates. Applicable for slotting, plunging and profiling in steels, alloys, cast iron, aluminum and non-ferrous materials. Made in the USA. GWS/Monster Tool Part #204-001460B

20mm 2 Flute Square End Single End Carbide End Mill, TiCN Coated, Regular Length, 38mmFlute, 102MM OAL 38MM LOC,20MM SHANK,102MM OAL 30? helix, right hand spiral, right hand cut, 2 flute square end center cutting single end general purpose solid carbide end mill with plain cylindrical shank. Made from C-2 grade sub-micron grain carbide with 10% cobalt content. 2 flute end mills allow for extra chip clearance in heavy cuts with high material removal rates. Applicable for slotting, plunging and profiling in steels, alloys, cast iron, aluminum and non-ferrous materials. Made in the USA. GWS/Monster Tool Part #204-001460C

20mm 2 Flute Square End Single End Carbide End Mill, TiN Coated, Regular Length, 38mmFlute, 102MM OAL 38MM LOC,20MM SHANK,102MM OAL 30? helix, right hand spiral, right hand cut, 2 flute square end center cutting single end general purpose solid carbide end mill with plain cylindrical shank. Made from C-2 grade sub-micron grain carbide with 10% cobalt content. 2 flute end mills allow for extra chip clearance in heavy cuts with high material removal rates. Applicable for slotting, plunging and profiling in steels, alloys, cast iron, aluminum and non-ferrous materials. Made in the USA. GWS/Monster Tool Part #204-001460A

20mm 4 Flute Ball Nose Single End Carbide End Mill, Bright Finish, Regular Length, 38mm Flute Length, 102mm OAL 38MM LOC,20MM SHANK,102MM OAL 30? helix, right hand spiral, right hand cut, 4 flute ball nose center cutting single end general purpose carbide end mill with plain cylindrical shank. C-2 grade sub-micron grain carbide with 10% cobalt content. Four flute design offers increased core diameter which minimizes tool deflection & improves accuracy. For profiling, slotting, production milling & finishing applications in a wide range of ferrous metals, including stainless steels & high temp alloys. Made in the USA. GWS/Monster Tool Part #223-001600

20mm 4 Flute Ball Nose Single End Carbide End Mill, TiN Coated, Regular Length, 38mm Flute Length, 102mm OAL 38MM LOC,20MM SHANK,102MM OAL 30? helix, right hand spiral, right hand cut, 4 flute ball nose center cutting single end general purpose carbide end mill with plain cylindrical shank. C-2 grade sub-micron grain carbide with 10% cobalt content. Four flute design offers increased core diameter which minimizes tool deflection & improves accuracy. For profiling, slotting, production milling & finishing applications in a wide range of ferrous metals, including stainless steels & high temp alloys. Made in the USA. GWS/Monster Tool Part #223-001600A

20mm 4 Flute Square End Single End Carbide End Mill, AlTiN Coated, Extra Long Length, 76mm Flute Length, 152mm OAL 76MM LOC,20MM SHANK,152MM OAL 30? helix, right hand spiral, right hand cut, 4 flute square end center cutting single end general purpose carbide end mill with plain cylindrical shank. C-2 grade sub-micron grain carbide with 10% cobalt content. Four flute design offers increased core diameter which minimizes tool deflection & improves accuracy. For profiling, slotting, production milling & finishing applications in a wide range of ferrous metals, including stainless steels & high temp alloys. Made in the USA. GWS/Monster Tool Part #218-077874B

20mm 4 Flute Square End Single End Carbide End Mill, AlTiN Coated, Regular Length, 38mm Flute Length, 102mm OAL 38MM LOC,20MM SHANK,102MM OAL 30? helix, right hand spiral, right hand cut, 4 flute square end center cutting single end general purpose carbide end mill with plain cylindrical shank. C-2 grade sub-micron grain carbide with 10% cobalt content. Four flute design offers increased core diameter which minimizes tool deflection & improves accuracy. For profiling, slotting, production milling & finishing applications in a wide range of ferrous metals, including stainless steels & high temp alloys. Made in the USA. GWS/Monster Tool Part #206-001460B

20mm 4 Flute Square End Single End Carbide End Mill, Bright Finish, Extra Long Length, 76mm Flute Length, 152mm OAL 76MM LOC,20MM SHANK,152MM OAL 30? helix, right hand spiral, right hand cut, 4 flute square end center cutting single end general purpose carbide end mill with plain cylindrical shank. C-2 grade sub-micron grain carbide with 10% cobalt content. Four flute design offers increased core diameter which minimizes tool deflection & improves accuracy. For profiling, slotting, production milling & finishing applications in a wide range of ferrous metals, including stainless steels & high temp alloys. Made in the USA. GWS/Monster Tool Part #218-077874

20mm 4 Flute Square End Single End Carbide End Mill, Bright Finish, Regular Length, 38mm Flute Length, 102mm OAL 38MM LOC,20MM SHANK,102MM OAL 30? helix, right hand spiral, right hand cut, 4 flute square end center cutting single end general purpose carbide end mill with plain cylindrical shank. C-2 grade sub-micron grain carbide with 10% cobalt content. Four flute design offers increased core diameter which minimizes tool deflection & improves accuracy. For profiling, slotting, production milling & finishing applications in a wide range of ferrous metals, including stainless steels & high temp alloys. Made in the USA. GWS/Monster Tool Part #206-001460

20mm 4 Flute Square End Single End Carbide End Mill, TiCN Coated, Regular Length, 38mm Flute Length, 102mm OAL 38MM LOC,20MM SHANK,102MM OAL 30? helix, right hand spiral, right hand cut, 4 flute square end center cutting single end general purpose carbide end mill with plain cylindrical shank. C-2 grade sub-micron grain carbide with 10% cobalt content. Four flute design offers increased core diameter which minimizes tool deflection & improves accuracy. For profiling, slotting, production milling & finishing applications in a wide range of ferrous metals, including stainless steels & high temp alloys. Made in the USA. GWS/Monster Tool Part #206-001460C

20mm 4 Flute Square End Single End Carbide End Mill, TiN Coated, Regular Length, 38mm Flute Length, 102mm OAL 38MM LOC,20MM SHANK,102MM OAL 30? helix, right hand spiral, right hand cut, 4 flute square end center cutting single end general purpose carbide end mill with plain cylindrical shank. C-2 grade sub-micron grain carbide with 10% cobalt content. Four flute design offers increased core diameter which minimizes tool deflection & improves accuracy. For profiling, slotting, production milling & finishing applications in a wide range of ferrous metals, including stainless steels & high temp alloys. Made in the USA. GWS/Monster Tool Part #206-001460A

22mm 2 Flute Ball Nose Single End Carbide End Mill, Bright Finish, Regular Length, 38mmFlute, 102MM OAL 38MM LOC,22MM SHANK,102MM OAL 30? helix, right hand spiral, right hand cut, 2 flute ball nose center cutting single end general purpose solid carbide end mill with plain cylindrical shank. Made from C-2 grade sub-micron grain carbide with 10% cobalt content. 2 flute end mills allow for extra chip clearance in heavy cuts with high material removal rates. Applicable for slotting, plunging and profiling in steels, alloys, cast iron, aluminum and non-ferrous materials. Made in the USA. GWS/Monster Tool Part #221-001620

22mm 2 Flute Square End Single End Carbide End Mill, TiAlN Coated, Regular Length, 38mmFlute, 102MM OAL 38MM LOC,22MM SHANK,102MM OAL 30? helix, right hand spiral, right hand cut, 2 flute square end center cutting single end general purpose solid carbide end mill with plain cylindrical shank. Made from C-2 grade sub-micron grain carbide with 10% cobalt content. 2 flute end mills allow for extra chip clearance in heavy cuts with high material removal rates. Applicable for slotting, plunging and profiling in steels, alloys, cast iron, aluminum and non-ferrous materials. Made in the USA. GWS/Monster Tool Part #204-001470B

22mm 4 Flute Ball Nose Single End Carbide End Mill, AlTiN Coated, Regular Length, 38mm Flute Length, 102mm OAL 38MM LOC,22MM SHANK,102MM OAL 30? helix, right hand spiral, right hand cut, 4 flute ball nose center cutting single end general purpose carbide end mill with plain cylindrical shank. C-2 grade sub-micron grain carbide with 10% cobalt content. Four flute design offers increased core diameter which minimizes tool deflection & improves accuracy. For profiling, slotting, production milling & finishing applications in a wide range of ferrous metals, including stainless steels & high temp alloys. Made in the USA. GWS/Monster Tool Part #223-001620B

22mm 4 Flute Square End Single End Carbide End Mill, AlTiN Coated, Regular Length, 38mm Flute Length, 102mm OAL 38MM LOC,22MM SHANK,102MM OAL 30? helix, right hand spiral, right hand cut, 4 flute square end center cutting single end general purpose carbide end mill with plain cylindrical shank. C-2 grade sub-micron grain carbide with 10% cobalt content. Four flute design offers increased core diameter which minimizes tool deflection & improves accuracy. For profiling, slotting, production milling & finishing applications in a wide range of ferrous metals, including stainless steels & high temp alloys. Made in the USA. GWS/Monster Tool Part #206-001470B

22mm 4 Flute Square End Single End Carbide End Mill, Bright Finish, Regular Length, 38mm Flute Length, 102mm OAL 38MM LOC,22MM SHANK,102MM OAL 30? helix, right hand spiral, right hand cut, 4 flute square end center cutting single end general purpose carbide end mill with plain cylindrical shank. C-2 grade sub-micron grain carbide with 10% cobalt content. Four flute design offers increased core diameter which minimizes tool deflection & improves accuracy. For profiling, slotting, production milling & finishing applications in a wide range of ferrous metals, including stainless steels & high temp alloys. Made in the USA. GWS/Monster Tool Part #206-001470

22mm 4 Flute Square End Single End Carbide End Mill, TiCN Coated, Regular Length, 38mm Flute Length, 102mm OAL 38MM LOC,22MM SHANK,102MM OAL 30? helix, right hand spiral, right hand cut, 4 flute square end center cutting single end general purpose carbide end mill with plain cylindrical shank. C-2 grade sub-micron grain carbide with 10% cobalt content. Four flute design offers increased core diameter which minimizes tool deflection & improves accuracy. For profiling, slotting, production milling & finishing applications in a wide range of ferrous metals, including stainless steels & high temp alloys. Made in the USA. GWS/Monster Tool Part #206-001470C

22mm 4 Flute Square End Single End Carbide End Mill, TiN Coated, Regular Length, 38mm Flute Length, 102mm OAL 38MM LOC,22MM SHANK,102MM OAL 30? helix, right hand spiral, right hand cut, 4 flute square end center cutting single end general purpose carbide end mill with plain cylindrical shank. C-2 grade sub-micron grain carbide with 10% cobalt content. Four flute design offers increased core diameter which minimizes tool deflection & improves accuracy. For profiling, slotting, production milling & finishing applications in a wide range of ferrous metals, including stainless steels & high temp alloys. Made in the USA. GWS/Monster Tool Part #206-001470A

23/64\