Monticello Products (Page 1)

From Riverstone Industries comes the only sink system designed for greenhouses. The Monticello (MONT-S2) is specifically designed to mount on ALL Monticello greenhouses, both inside or outside within a few minutes, all that is needed is standard garden hose. With the Monticello Greenhouse sink you can now perform all you potting, planting, tool cleaning and watering functions right at your greenhouse. Whether using it to clean dirt off shoes or boots, garden tools, paint brushes, kids hands, cleaning vegetables and herbs from your garden or just about anything you need to clean the Monticello Greenhouse Sink works great. The large surface area allows for this coupled with the built in tool storage make this a great alternative to an indoor sink. The detachable hose reel holds up to 100 ft. of garden hose.

Monticello Desk Pad with Fold-Out Sides, 24 x 19, Black

Not all greenhouses are built the same and the Monticello line of greenhouses by Riverstone Industries proves this to be true. The Monticello is applying good old American ingenuity to make the best product for our customers and help to elevate the industry standards of all greenhouses. Constructed from the highest quality extruded aluminum (US grade - not the thinner and more brittle foreign aluminum) and coated as not to discolor over the years (guaranteed to contain 0.0% lead), our greenhouse uses on average more than 100 lbs. more aluminum than the average imported greenhouse. Why is this important. The weaker the framework the less snow the greenhouse can hold in the winter time before collapsing on itself also the easier it will be get damages in wind. While most hobby greenhouses on the market us less expensive thinner walls and roofing materials (the crystal clear walls are as thin as 0.2 mm), the Monticello uses professional grade 8 mm twin wall polycarbonate. This is the same thickness as used in the commercial greenhouses. The twin wall polycarbonate acts as a double pain window keeping cooler air in during warm months and insulating the greenhouse from cold air in the wintertime. This not only makes the Monticello more efficient to grow in for a longer period of time than other greenhouses but it also adds to the efficiency of growing, cutting down electric bills for those who choose to grow year round.

Not all greenhouses are built the same and the Monticello line of greenhouses by Riverstone Industries proves this to be true. The Monticello is applying good old American ingenuity to make the best product for our customers and help to elevate the industry standards of all greenhouses. Constructed from the highest quality extruded aluminum (US grade - not the thinner and more brittle foreign aluminum) and coated as not to discolor over the years (guaranteed to contain 0.0% lead), our greenhouse uses on average more than 40 lbs. more aluminum than the average imported greenhouse. Why is this important. The weaker the framework the less snow the greenhouse can hold in the winter time before collapsing on itself also the easier it will be get damages in wind. While most hobby greenhouses on the market us less expensive thinner walls and roofing materials (the crystal clear walls are as thin as 0.2 mm), the Monticello uses professional grade 8 mm twin wall polycarbonate. This is the same thickness as used in the commercial greenhouses. The twin wall polycarbonate acts as a double pain window keeping cooler air in during warm months and insulating the greenhouse from cold air in the wintertime. This not only makes the Monticello more efficient to grow in for a longer period of time than other greenhouses but it also adds to the efficiency of growing, cutting down electric bills for those who choose to grow year round.

Not all greenhouses are built the same and the Monticello line of greenhouses by Riverstone Industries proves this to be true. The Monticello is applying good old American ingenuity to make the best product for our customers and help to elevate the industry standards of all greenhouses. Constructed from the highest quality extruded aluminum (US grade - not the thinner and more brittle foreign aluminum) and coated as not to discolor over the years (guaranteed to contain 0.0% lead), our greenhouse uses on average more than 55 lbs. more aluminum than the average imported greenhouse. Why is this important. The weaker the framework the less snow the greenhouse can hold in the winter time before collapsing on itself also the easier it will be get damages in wind. While most hobby greenhouses on the market us less expensive thinner walls and roofing materials (the crystal clear walls are as thin as 0.2 mm), the Monticello uses professional grade 8 mm twin wall polycarbonate. This is the same thickness as used in the commercial greenhouses. The twin wall polycarbonate acts as a double pain window keeping cooler air in during warm months and insulating the greenhouse from cold air in the wintertime. This not only makes the Monticello more efficient to grow in for a longer period of time than other greenhouses but it also adds to the efficiency of growing, cutting down electric bills for those who choose to grow year round.

Not all greenhouses are built the same and the Monticello line of greenhouses by Riverstone Industries proves this to be true. The Monticello is applying good old American ingenuity to make the best product for our customers and help to elevate the industry standards of all greenhouses. Constructed from the highest quality extruded aluminum (US grade - not the thinner and more brittle foreign aluminum) and coated as not to discolor over the years (guaranteed to contain 0.0% lead), our greenhouse uses on average more than 70 lbs. more aluminum than the average imported greenhouse. Why is this important. The weaker the framework the less snow the greenhouse can hold in the winter time before collapsing on itself also the easier it will be get damages in wind. While most hobby greenhouses on the market us less expensive thinner walls and roofing materials (the crystal clear walls are as thin as 0.2 mm), the Monticello uses professional grade 8 mm twin wall polycarbonate. This is the same thickness as used in the commercial greenhouses. The twin wall polycarbonate acts as a double pain window keeping cooler air in during warm months and insulating the greenhouse from cold air in the wintertime. This not only makes the Monticello more efficient to grow in for a longer period of time than other greenhouses but it also adds to the efficiency of growing, cutting down electric bills for those who choose to grow year round.

Not all greenhouses are built the same and the Monticello line of greenhouses by Riverstone Industries proves this to be true. The Monticello is applying good old American ingenuity to make the best product for our customers and help to elevate the industry standards of all greenhouses. Constructed from the highest quality extruded aluminum (US grade - not the thinner and more brittle foreign aluminum) and coated as not to discolor over the years (guaranteed to contain 0.0% lead), our greenhouse uses on average more than 85 lbs. more aluminum than the average imported greenhouse. Why is this important. The weaker the framework the less snow the greenhouse can hold in the winter time before collapsing on itself also the easier it will be get damages in wind. While most hobby greenhouses on the market us less expensive thinner walls and roofing materials (the crystal clear walls are as thin as 0.2 mm), the Monticello uses professional grade 8 mm twin wall polycarbonate. This is the same thickness as used in the commercial greenhouses. The twin wall polycarbonate acts as a double pain window keeping cooler air in during warm months and insulating the greenhouse from cold air in the wintertime. This not only makes the Monticello more efficient to grow in for a longer period of time than other greenhouses but it also adds to the efficiency of growing, cutting down electric bills for those who choose to grow year round.

Not all greenhouses are built the same and the Monticello line of greenhouses by Riverstone Industries proves this to be true. The Monticello is applying good old American ingenuity to make the best product for our customers and help to elevate the industry standards of all greenhouses. Constructed from the highest quality extruded aluminum (US grade - not the thinner and more brittle foreign aluminum) and electrostatically painted Black (guaranteed to contain 0.0% lead), our greenhouse uses on average more than 100 lbs. more aluminum than the average imported greenhouse. Why is this important. The weaker the framework the less snow the greenhouse can hold in the winter time before collapsing on itself also the easier it will be get damages in wind. While most hobby greenhouses on the market us less expensive thinner walls and roofing materials (the crystal clear walls are as thin as 0.2 mm), the Monticello uses professional grade 8 mm twin wall polycarbonate. This is the same thickness as used in the commercial greenhouses. The twin wall polycarbonate acts as a double pain window keeping cooler air in during warm months and insulating the greenhouse from cold air in the wintertime. This not only makes the Monticello more efficient to grow in for a longer period of time than other greenhouses but it also adds to the efficiency of growing, cutting down electric bills for those who choose to grow year round.

Not all greenhouses are built the same and the Monticello line of greenhouses by Riverstone Industries proves this to be true. The Monticello is applying good old American ingenuity to make the best product for our customers and help to elevate the industry standards of all greenhouses. Constructed from the highest quality extruded aluminum (US grade - not the thinner and more brittle foreign aluminum) and electrostatically painted Black (guaranteed to contain 0.0% lead), our greenhouse uses on average more than 100 lbs. more aluminum than the average imported greenhouse. Why is this important. The weaker the framework the less snow the greenhouse can hold in the winter time before collapsing on itself also the easier it will be get damages in wind. While most hobby greenhouses on the market us less expensive thinner walls and roofing materials (the crystal clear walls are as thin as 0.2 mm), the Monticello uses professional grade 8mm twin wall polycarbonate. This is the same thickness as used in the commercial greenhouses. The twin wall polycarbonate acts as a double pain window keeping cooler air in during warm months and insulating the greenhouse from cold air in the wintertime. This not only makes the Monticello more efficient to grow in for a longer period of time than other greenhouses but it also adds to the efficiency of growing, cutting down electric bills for those who choose to grow year round.

Not all greenhouses are built the same and the Monticello line of greenhouses by Riverstone Industries proves this to be true. The Monticello is applying good old American ingenuity to make the best product for our customers and help to elevate the industry standards of all greenhouses. Constructed from the highest quality extruded aluminum (US grade - not the thinner and more brittle foreign aluminum) and electrostatically painted Black (guaranteed to contain 0.0% lead), our greenhouse uses on average more than 40 lbs. more aluminum than the average imported greenhouse. Why is this important. The weaker the framework the less snow the greenhouse can hold in the winter time before collapsing on itself also the easier it will be get damages in wind. While most hobby greenhouses on the market us less expensive thinner walls and roofing materials (the crystal clear walls are as thin as 0.2 mm), the Monticello uses professional grade 8mm twin wall polycarbonate. This is the same thickness as used in the commercial greenhouses. The twin wall polycarbonate acts as a double pain window keeping cooler air in during warm months and insulating the greenhouse from cold air in the wintertime. This not only makes the Monticello more efficient to grow in for a longer period of time than other greenhouses but it also adds to the efficiency of growing, cutting down electric bills for those who choose to grow year round.

Not all greenhouses are built the same and the Monticello line of greenhouses by Riverstone Industries proves this to be true. The Monticello is applying good old American ingenuity to make the best product for our customers and help to elevate the industry standards of all greenhouses. Constructed from the highest quality extruded aluminum (US grade - not the thinner and more brittle foreign aluminum) and electrostatically painted Black (guaranteed to contain 0.0% lead), our greenhouse uses on average more than 55 lbs. more aluminum than the average imported greenhouse. Why is this important. The weaker the framework the less snow the greenhouse can hold in the winter time before collapsing on itself also the easier it will be get damages in wind. While most hobby greenhouses on the market us less expensive thinner walls and roofing materials (the crystal clear walls are as thin as 0.2 mm), the Monticello uses professional grade 8mm twin wall polycarbonate. This is the same thickness as used in the commercial greenhouses. The twin wall polycarbonate acts as a double pain window keeping cooler air in during warm months and insulating the greenhouse from cold air in the wintertime. This not only makes the Monticello more efficient to grow in for a longer period of time than other greenhouses but it also adds to the efficiency of growing, cutting down electric bills for those who choose to grow year round.

Not all greenhouses are built the same and the Monticello line of greenhouses by Riverstone Industries proves this to be true. The Monticello is applying good old American ingenuity to make the best product for our customers and help to elevate the industry standards of all greenhouses. Constructed from the highest quality extruded aluminum (US grade - not the thinner and more brittle foreign aluminum) and electrostatically painted Black (guaranteed to contain 0.0% lead), our greenhouse uses on average more than 70 lbs. more aluminum than the average imported greenhouse. Why is this important. The weaker the framework the less snow the greenhouse can hold in the winter time before collapsing on itself also the easier it will be get damages in wind. While most hobby greenhouses on the market us less expensive thinner walls and roofing materials (the crystal clear walls are as thin as 0.2 mm), the Monticello uses professional grade 8 mm twin wall polycarbonate. This is the same thickness as used in the commercial greenhouses. The twin wall polycarbonate acts as a double pain window keeping cooler air in during warm months and insulating the greenhouse from cold air in the wintertime. This not only makes the Monticello more efficient to grow in for a longer period of time than other greenhouses but it also adds to the efficiency of growing, cutting down electric bills for those who choose to grow year round.

Not all greenhouses are built the same and the Monticello line of greenhouses by Riverstone Industries proves this to be true. The Monticello is applying good old American ingenuity to make the best product for our customers and help to elevate the industry standards of all greenhouses. Constructed from the highest quality extruded aluminum (US grade - not the thinner and more brittle foreign aluminum) and electrostatically painted Black (guaranteed to contain 0.0% lead), our greenhouse uses on average more than 70 lbs. more aluminum than the average imported greenhouse. Why is this important. The weaker the framework the less snow the greenhouse can hold in the winter time before collapsing on itself also the easier it will be get damages in wind. While most hobby greenhouses on the market us less expensive thinner walls and roofing materials (the crystal clear walls are as thin as 0.2 mm), the Monticello uses professional grade 8mm twin wall polycarbonate. This is the same thickness as used in the commercial greenhouses. The twin wall polycarbonate acts as a double pain window keeping cooler air in during warm months and insulating the greenhouse from cold air in the wintertime. This not only makes the Monticello more efficient to grow in for a longer period of time than other greenhouses but it also adds to the efficiency of growing, cutting down electric bills for those who choose to grow year round.

Not all greenhouses are built the same and the Monticello line of greenhouses by Riverstone Industries proves this to be true. The Monticello is applying good old American ingenuity to make the best product for our customers and help to elevate the industry standards of all greenhouses. Constructed from the highest quality extruded aluminum (US grade - not the thinner and more brittle foreign aluminum) and electrostatically painted Black (guaranteed to contain 0.0% lead), our greenhouse uses on average more than 85 lbs. more aluminum than the average imported greenhouse. Why is this important. The weaker the framework the less snow the greenhouse can hold in the winter time before collapsing on itself also the easier it will be get damages in wind. While most hobby greenhouses on the market us less expensive thinner walls and roofing materials (the crystal clear walls are as thin as 0.2 mm), the Monticello uses professional grade 8 mm twin wall polycarbonate. This is the same thickness as used in the commercial greenhouses. The twin wall polycarbonate acts as a double pain window keeping cooler air in during warm months and insulating the greenhouse from cold air in the wintertime. This not only makes the Monticello more efficient to grow in for a longer period of time than other greenhouses but it also adds to the efficiency of growing, cutting down electric bills for those who choose to grow year round.

The Monticello - Mojave Edition is the ideal warm weather-growing greenhouse. We have now added to the list of features an off the grid solar powered commercial grade ventilation system to the Monticello. This system will allow owners to have much better control of their growing environment with no electrical costs. Our commercial fan, exhaust lovers, and our solar panel can produce more than 2 times the needed power to operate the fan at 100%, allowing for future options such as lighting and heating. The Mojave edition also now comes standard with pre-tinted roof panels and automatic roof vents - no more need for our shade cloth system and taking the guesswork out of temperature control. While most hobby greenhouses on the market use less expensive thinner walls and roofing materials, the Monticello uses professional grade 8 mm twin wall polycarbonate. The twin wall polycarbonate acts as a double pain window keeping cooler air in during warm months and insulating the greenhouse from cold air in the wintertime. The Monticello also offers the ability to grow as your needs grow with the 4 ft. extension kit that can be purchased anytime in the future. For the gardener that is looking for a quality greenhouse system that will supply years of hassle free indoor gardening this is the greenhouse for you. We hope you enjoy growing in the Monticello as much as we enjoyed designing it.

The Monticello 12 foot Shade Cloth Kit is specifically designed for the Monticello line of greenhouses (12 ft. greenhouses). The design is simple, unique and thoughtful. Most shade clothes go on the outside of the greenhouse, interfering with roof vent and side window functioning. They are bulky and not easy to set up or take down.The Monticello Shade Cloth kit comes ready to use, no grommet installation needed. The commercial grade shade cloth (rated at 63%) works off a specially designed commercial grade wire system guaranteed to last for 7 years. The shade cloth comes in 4 foot sections so it will work with our Automatic Watering system and since the shade cloth is on the inside, it will not interfere with the Monticello Automatic Vent openers allowing fresh air to flow in and out un impeded. To operate the Shade Cloth System is as easy as pulling the cloth back to open or pulling tight to the other side to close. Just like our greenhouses, the Monticello Shade Cloth is proudly made in The USA from start to finish.

The Monticello 12 ft. Work Station Kit is specifically designed for the Monticello line of greenhouses (12ft greenhouses). The design is simple, unique and thoughtful. The Work Station can be installed either during initial construction or at a later time. The Kit Includes a full 12 ft. run (24 in. deep) for use on either side of the Monticello greenhouse. The commercial grade and design of the Work Station allows for quick installation (about 30 minutes) and versatility. Since the installation of the support bars uses the inside bolt tracks the shelving could be set at any height within the greenhouse (up to 4ft. off the ground). The sturdy vented shelving units on the Work Station are constructed from commercial grade high impact PVC. The vents allow water and air to circulate as well as allowing sunlight to reach underneath the Work Bench. The angle support design allows for free flowing movement without concern for support legs to trip over when working at the workbench. The bench itself will hold up to 900 lbs.. Just like our greenhouses, the Monticello Work Station Kit is proudly made in The USA from start to finish.

The Monticello 16 foot Shade Cloth Kit is specifically designed for the Monticello line of greenhouses (16 ft. greenhouses). The design is simple, unique and thoughtful. Most shade clothes go on the outside of the greenhouse, interfering with roof vent and side window functioning. They are bulky and not easy to set up or take down. The Monticello Shade Cloth kit comes ready to use, no grommet installation needed. The commercial grade shade cloth (rated at 63%) works off a specially designed commercial grade wire system guaranteed to last for 7 years. The shade cloth comes in 4 foot sections so it will work with our Automatic Watering system and since the shade cloth is on the inside, it will not interfere with the Monticello Automatic Vent openers allowing fresh air to flow in and out un impeded. To operate the Shade Cloth System is as easy as pulling the cloth back to open or pulling tight to the other side to close. Just like our greenhouses, the Monticello Shade Cloth is proudly made in The USA from start to finish.

The Monticello 16 ft. Work Station Kit is specifically designed for the Monticello line of greenhouses (16 ft. greenhouses). The design is simple, unique and thoughtful. The Work Station can be installed either during initial construction or at a later time. The Kit Includes a full 16 ft. run (24 in. deep) for use on either side of the Monticello greenhouse. The commercial-grade and design of the Work Station allows for quick installation (about 40 minutes) and versatility. Since the installation of the support bars uses the inside bolt tracks the shelving could be set at any height within the greenhouse (up to 4 ft. off the ground). The sturdy vented shelving units on the Work Station are constructed from commercial-grade high impact PVC. The vents allow water and air to circulate as well as allowing sunlight to reach underneath the Work Bench. The angle support design allows for free flowing movement without concern for support legs to trip over when working at the workbench. The bench itself will hold up to 900 lbs.

The Monticello 20 foot Shade Cloth Kit is specifically designed for the Monticello line of greenhouses (20ft greenhouses). The design is simple, unique and thoughtful. Most shade clothes go on the outside of the greenhouse, interfering with roof vent and side window functioning. They are bulky and not easy to set up or take down. The Monticello Shade Cloth kit comes ready to use, no grommet installation needed. The commercial grade shade cloth (rated at 63%) works off a specially designed commercial grade wire system guaranteed to last for 7 years. The shade cloth comes in 4 foot sections so it will work with our Automatic Watering system and since the shade cloth is on the inside, it will not interfere with the Monticello Automatic Vent openers allowing fresh air to flow in and out un impeded. To operate the Shade Cloth System is as easy as pulling the cloth back to open or pulling tight to the other side to close. Just like our greenhouses, the Monticello Shade Cloth is proudly made in The USA from start to finish.

The Monticello 20 ft. Work Station Kit is specifically designed for the Monticello line of greenhouses (20ft greenhouses). The design is simple, unique and thoughtful. The Work Station can be installed either during initial construction or at a later time. The Kit Includes a full 20 ft. run (24 in. deep) for use on either side of the Monticello greenhouse. The commercial grade and design of the Work Station allows for quick installation (about 50 minutes) and versatility. Since the installation of the support bars uses the inside bolt tracks the shelving could be set at any height within the greenhouse (up to 4 ft. off the ground). The sturdy vented shelving units on the Work Station are constructed from commercial grade high impact PVC. The vents allow water and air to circulate as well as allowing sunlight to reach underneath the Work Bench. The angle support design allows for free flowing movement without concern for support legs to trip over when working at the workbench. The bench itself will hold up to 1,400 lbs..Just like our greenhouses, the Monticello Work Station Kit is proudly made in The USA from start to finish.

The Monticello 24 foot Shade Cloth Kit is specifically designed for the Monticello line of greenhouses (24 ft. greenhouses). The design is simple, unique and thoughtful. Most shade clothes go on the outside of the greenhouse, interfering with roof vent and side window functioning. They are bulky and not easy to set up or take down. The Monticello Shade Cloth kit comes ready to use, no grommet installation needed. The commercial grade shade cloth (rated at 63%) works off a specially designed commercial grade wire system guaranteed to last for 7 years. The shade cloth comes in 4 foot sections so it will work with our Automatic Watering system and since the shade cloth is on the inside, it will not interfere with the Monticello Automatic Vent openers allowing fresh air to flow in and out un impeded. To operate the Shade Cloth System is as easy as pulling the cloth back to open or pulling tight to the other side to close. Just like our greenhouses, the Monticello Shade Cloth is proudly made in The USA from start to finish.

The Monticello 24 ft. Work Station Kit is specifically designed for the Monticello line of greenhouses (24ft greenhouses). The design is simple, unique and thoughtful. The Work Station can be installed either during initial construction or at a later time. The Kit Includes a full 24 ft. run (24 in. deep) for use on either side of the Monticello greenhouse. The commercial grade and design of the Work Station allows for quick installation (about 60 minutes) and versatility. Since the installation of the support bars uses the inside bolt tracks the shelving could be set at any height within the greenhouse (up to 4ft off the ground). The sturdy vented shelving units on the Work Station are constructed from commercial grade high impact PVC. The vents allow water and air to circulate as well as allowing sunlight to reach underneath the Work Bench. The angle support design allows for free flowing movement without concern for support legs to trip over when working at the workbench. The bench itself will hold up to 1,500 lbs..Just like our greenhouses, the Monticello Work Station Kit is proudly made in The USA from start to finish.

The Monticello 4 ft. extension kit is specifically designed for the Monticello line of greenhouses. The idea is simple, as your gardening greenhouse needs grow so can you greenhouse. The 4 ft. extension kit allows for the expansion of your greenhouse. The design and installation is simple and takes under 2 hours to assemble. Each 4 ft. extension kit comes includes a 2 ft. x 2 ft. roof vent with automatic opener and gutters. When ordering your extension kit make sure that the color matches your existing greenhouse. This one is designed specifically for Black frames and will work with the following greenhouses: MONT-8-BK, MONT-12-BK, MONT-16-BK, MONT-20-BK, MONT-24-BK.

The Monticello 4 ft. extension kit is specifically designed for the Monticello line of greenhouses. The idea is simple, as your gardening greenhouse needs grow so can you greenhouse. The 4 ft. extension kit allows for the expansion of your greenhouse. The design and installation is simple and takes under 2 hours to assemble. Each 4 ft. extension kit comes includes a 2 ft. x 2 ft. roof vent with automatic opener and gutters. When ordering your extension kit make sure that the color matches your existing greenhouse. This one is designed specifically for Natural Aluminum frames and will work with the following greenhouses:MONT-8-AL, MONT-12-AL, MONT-16-AL, MONT-20-AL, MONT-24-AL.

The Monticello 4 ft. extension Premium kit is specifically designed for the Monticello line of greenhouses. The idea is simple, as your gardening greenhouse needs grow so can you greenhouse. The 4 ft. extension kit allows for the expansion of your greenhouse. When ordering your extension kit make sure that the color matches your existing greenhouse. This one is designed specifically for Black frames and will work with the following greenhouses: MONT-8-AL-Premium, MONT-12-AL-Premium, MONT-16-AL-Premium, MONT-20-AL-Premium, MONT-24-BK-Premium.

The Monticello 4 ft. extension Premium kit is specifically designed for the Monticello line of greenhouses. The idea is simple, as your gardening greenhouse needs grow so can you greenhouse. The 4 ft. extension kit allows for the expansion of your greenhouse. When ordering your extension kit make sure that the color matches your existing greenhouse. This one is designed specifically for Black frames and will work with the following greenhouses: MONT-8-BK-Premium, MONT-12-BK-Premium, MONT-16-BK-Premium, MONT-20-BK-Premium, MONT-24-BK-Premium.

The Monticello 8 foot Shade cloth kit is specifically designed for the Monticello line of greenhouses (8ft. greenhouses). The design is simple, unique and thoughtful. Most shade clothes go on the outside of the greenhouse, interfering with roof vent and side window functioning. They are bulky and not easy to set up or take down. The Monticello Shade Cloth kit comes ready to use, no grommet installation needed. The commercial grade shade cloth (rated at 63%) works off a specially designed commercial grade wire system guaranteed to last for 7 years. The shade cloth comes in 4 foot sections so it will work with our Automatic Watering system and since the shade cloth is on the inside, it will not interfere with the Monticello Automatic Vent openers allowing fresh air to flow in and out un impeded. To operate the Shade Cloth System is as easy as pulling the cloth back to open or pulling tight to the other side to close. Just like our greenhouses, the Monticello Shade Cloth is proudly made in The USA from start to finish.

The Monticello 8 foot Work Station Kit is specifically designed for the Monticello line of greenhouses (8ft greenhouses). The design is simple, unique and thoughtful. The Work Station can be installed either during initial construction or at a later time. The Kit Includes a full 8 ft. run (24 in. deep) for use on either side of the Monticello greenhouse. The commercial grade and design of the Work Station allows for quick installation (about 20 minutes) and versatility. Since the installation of the support bars uses the inside bolt tracks the shelving could be set at any height within the greenhouse (up to 4ft off the ground). The sturdy vented shelving units on the Work Station are constructed from commercial grade high impact PVC. The vents allow water and air to circulate as well as allowing sunlight to reach underneath the Work Bench. The angle support design allows for free flowing movement without concern for support legs to trip over when working at the workbench. The bench itself will hold up to 600 lbs.. Just like our greenhouses, the Monticello Work Station Kit is proudly made in The USA from start to finish.

The Monticello Automatic Greenhouse Watering System is designed for all greenhouses with rough interior dimensions of 8 ft. x 12 ft. The Commercial grade system is similar to those used by professional growers. The Automatic Greenhouse Watering System is designed to be hung from the ceiling of the greenhouse. The 3 weighted sprinkler heads are separated by 4 ft. spray in a circular pattern. The Commercial digital timer is designed to allow for customer watering cycles based on climate and time of year. The Commercial grade hose is specifically designed to eliminate any bacteria or mold from the inside allowing for years of safe use. The end of the system is easily and quickly screwed onto one of the timer. The other end of the timer is screwed directly into the spigot.

The Monticello Automatic Greenhouse Watering System is designed for all greenhouses with rough interior dimensions of 8 ft. x 16 ft.. The Commercial grade system is similar to those used by professional growers. The Automatic Greenhouse Watering System is designed to be hung from the ceiling of the greenhouse. The 4 weighted sprinkler heads are separated by 4ft spray in a circular pattern. The Commercial digital timer is designed to allow for customer watering cycles based on climate and time of year. The Commercial grade hose is specifically designed to eliminate any bacteria or mold from the inside allowing for years of safe use. The end of the system is easily and quickly screwed onto one of the timer. The other end of the timer is screwed directly into the spigot.

The Monticello Automatic Greenhouse Watering System is designed for all greenhouses with rough interior dimensions of 8 ft. x 20 ft. The Commercial grade system is similar to those used by professional growers. The Automatic Greenhouse Watering System is designed to be hung from the ceiling of the greenhouse. The 5 weighted sprinkler heads are separated by 4ft. spray in a circular pattern. The Commercial digital timer is designed to allow for customer watering cycles based on climate and time of year. The Commercial grade hose is specifically designed to eliminate any bacteria or mold from the inside allowing for years of safe use. The end of the system is easily and quickly screwed onto one of the timer. The other end of the timer is screwed directly into the spigot.

The Monticello Automatic Greenhouse Watering System is designed for all greenhouses with rough interior dimensions of 8 ft. x 24ft.. The Commercial grade system is similar to those used by professional growers. The Automatic Greenhouse Watering System is designed to be hung from the ceiling of the greenhouse. The 6 weighted sprinkler heads are separated by 4ft spray in a circular pattern. The Commercial digital timer is designed to allow for customer watering cycles based on climate and time of year. The Commercial grade hose is specifically designed to eliminate any bacteria or mold from the inside allowing for years of safe use. The end of the system is easily and quickly screwed onto one of the timer. The other end of the timer is screwed directly into the spigot.

The Monticello Automatic Greenhouse Watering System is designed for all greenhouses with rough interior dimensions of 8ft. x 8ft.. The Commercial grade system is similar to those used by professional growers. The Automatic Greenhouse Watering System is designed to be hung from the ceiling of the greenhouse. The 2 weighted sprinkler heads are separated by 4ft. spray in a circular pattern. The Commercial digital timer is designed to allow for customer watering cycles based on climate and time of year. The Commercial grade hose is specifically designed to eliminate any bacteria or mold from the inside allowing for years of safe use. The end of the system is easily and quickly screwed onto one of the timer. The other end of the timer is screwed directly into the spigot.

The Monticello Automatic Roof Vent is designed for simple and easy installation that should take about 30 minutes to install on existing Monticello Greenhouses. This Roof vent is designed for aluminum colored framed Monticello Greenhouses. The Automatic Roof Vent is made from the same high quality aluminum, polycarbonate, and includes the same professional grade automatic vent opener as the Monticello Greenhouse comes standard with.

The Monticello Automatic Roof Vent is designed for simple and easy installation that should take about 30 minutes to install on existing Monticello Greenhouses. This Roof Vent is designed for black framed Monticello Greenhouses. The Automatic Roof Vent is made from the same high quality aluminum, polycarbonate, and includes the same professional grade automatic vent opener as the Monticello Greenhouse comes standard with.

The Monticello Door Kit is designed to allow Monticello Greenhouse Owners to add an additional dual hinged door to the rear end of the greenhouse. Greenhouse material is Aluminum. The doors are the same high quality doors that are used in the original Monticello Greenhouse.

The Monticello Solar Powered Ventilation System is designed to control the temperature in your greenhouse during the hot and cooler months. Most plants will not flower and fruit at temperatures over 85 degrees. To get them to flower temperature control is key. Our commercial fan, exhaust louvers, and commercial thermostat are all made in the USA and our solar panel can product more than 2 times the needed power to operate the fan at 100%, allowing for future options such as lighting and heating. The Monticello Solar Ventilation System allows for off the grid operation, getting power to your greenhouse where you need it. The system is easily retrofitted to other non-Monticello greenhouses as well.