Specifications (page 10 / 10)

Steel, 3.81mm ID, #6-32 Thread

Steel, 4.775mm ID, #8-32 Thread

Steel, 5.334mm ID, #4-40 Thread

Steel, 5.334mm ID, #6-32 Thread

Steel, 5.3mm ID, M3.5x0.6 Thread

Steel, 5.3mm ID, M3x0.5 Thread

Steel, 5.791mm ID, #10-32 Thread

Steel, 7.493mm ID, 1/4"-20 Thread

Steel, 9.804mm ID, #10-24 Thread

Steel, 9.804mm ID, #10-32 Thread

Steel, 9.804mm ID, #12-24 Thread

Steel, 9.804mm ID, #8-32 Thread

Steel, 9.804mm ID, 1/4"-20 Thread

Steel, 9.804mm ID, 1/4"-28 Thread

Steel, 9.8mm ID, M4x0.7 Thread

Steel, 9.8mm ID, M5x0.8 Thread

Steel, 9.8mm ID, M6x1 Thread

Steel, Zinc Plated

Surface Mount Freestanding

Surface Mounted

Surface Wall Mounted

Swing Bolt Style

Swing Bolt Style - Viton

Thermally Bonded Polypropylene End Caps

These bodies are to be used with External Crimp Systems and SFC50 Sanitary Ferrules.

These bodies are to be used with Segmented End (SE) style Internal Expansion Systems and SE Sanitary Ferrules.

These bodies are to be used with a Pull Mandrel (PM) style Internal Expansion Systems and SE (Segmented End) Sanitary Ferrules.

These corrosion resistant cam & groove couplings are designed for acid applications in highly corrosive media including hydrochloric acid and sulfuric acid.

This ferrule has surface finish of 32RA or better, but is not listed in 3A Certificate.

Through Hole, Right Angle

Two swivel joint inlets and two outlet risers to handle two equal lengths of hose

Type 304 stainless steel handles, Type 304 stainless steel handle pins, Type 304 stainless steel pull rings, Type 304 stainless steel safety clips, Buna-N Gaskets

Type 304 stainless steel handles, type 304 stainless steel handle pins, type 304 stainless steel pull rings, type 304 stainless steel safety clips, EPDM gaskets

Type AA core is 3/4" metal pipe. Core ends are 15/16" and 13/16" with end disks of 11" diameter on both ends.

Type CA core is 3/4" metal pipe. Core ends are 15/16" and 13/16".

Type CO core is 3" I.D. fiberboard tube with drive pin 2-1/2" from one end of tube only. No cups or discs are used.

Type FA core is 2-1/8" I.D. Notched fiberboard tube with no drive pin, discs or cups. Most Farr V-8 (vertical) units use a 1-3/4" I.D. core.

Type TR (Trane) CR (Carrier) core is 2-7/16" I.D. fiberboard tube with a metal cup secured and recessed to a depth of 1-1/2" in each end. The cups are stamped to form a 1-1/2" square.

USB 3.0 (USB 3.1 Gen 1, Superspeed)

USB 3.2 Gen 1 (USB 3.1 Gen 1, E-Mark, Superspeed (USB 3.0)), USB 3.2 Gen 2 (USB 3.1 Gen 2, Superspeed + (USB 3.1))

USB 3.2 Gen 1 (USB 3.1 Gen 1, Superspeed (USB 3.0))

USB 3.2 Gen 1 (USB 3.1 Gen 1, Superspeed (USB 3.0)), USB 3.2 Gen 2 (USB 3.1 Gen 2, Superspeed + (USB 3.1))

USB 3.2 Gen 2 (USB 3.1 Gen 2, E-Mark, Superspeed+ (USB 3.1))

USB 3.2 Gen 2 (USB 3.1 Gen 2, Superspeed + (USB 3.1))

USB 3.2 Gen 2 (USB 3.1 Gen 2, Superspeed+ (USB 3.1))

Universal Frame

Uses candelabra type bulbs

Uses medium base type bulbs

Uses mr16 type bulbs

Using a 200 mesh screen backer combined with a 14 mesh screen of sintered construction.

Vacuum service rating is up to 635 mm (25?) of Hg (mercury) at 85.5% vacuum. This equates to 12.3 PSI vacuum.

Wall Sconce from the

Wall sconce from the

Water Grade - DOE (Double Open Ended) - Forward: 75 PSID @ 70?F - Reverse: 40 PSID @ 176?F

White, 1/2" Nap

White, 1/4" Nap

With Magsafe Case Black

Withstands high pressure

First Prev 1 2 3 4 5 6 7 8 9 10 NextLast