Bullet_point (page 1008 / 1157)

Tempered steel wire housing with an inner nylon sleeve for long life and smooth operation.
Tempered thick 3/8'' (10mm) clear glass
Tempered twice for extra hardness. Results in multiple extractions per tool.
Tempering Process specifically tailored to manipulate the molecular structure of the Q741 wire
Template guide
Template included for easy installation
Temples adjust to four different lengths
Temporary Floor Marking Solution Lasts 6-9 Months
Temporary disposal bags help make cleanup easier
Tempshield is the industry standard for handling liquid nitrogen and for other ultra-cold cryogenic environments
Temptrol Pressure Balancing valve
Temptrol pressure balancing valve
Ten Factory
Ten buttons
Ten cloth-covered buttons
Ten cloth-covered buttons, thermometer pockets
Ten dyed-to-match buttons
Ten stage velocity sensitive valving provides tuning specific for each vehicle
Ten times stronger than paper envelopes
Ten-stage velocity sensitive valving - Provides tuning specific for each vehicle
Ten-year limited Warranty
Tena
Tenneco shouldered bushings: Shouldered bushing and bonded bushing with sleeve designs prevent (bushing walkout) for improved quality and durability - on most applications
Tens & Dual Poly-V Kits
Tensile Cord - Dual Core Hybrid; Tooth Cover - Specially treated nylon fabric to reduce friction and pulley wear
Tensile Cord: Specially treated to provide strength, added flex life and resistance to stretching
Tensile Member - Polyester
Tensile Strength :
Tensile Strength – 120,000 psi. min.
Tensile Strength – 150,000 psi. min.
Tensile Strength – 60,000 psi. min
Tensile Strength – 60,000 psi. min.
Tensile Strength – 740,000 psi. min. (#10 thru 1/2’’ diams.)
Tensile Strength: 1,000 psi; Elongation: 1.5; Tear Strength: 22 N/mm; Compression Set: 0.25; Density: 1.90 g/cm3
Tensile Strength: 1,000 psi; Elongation: 3.3; Tear Strength: 22 N/mm; Compression Set: 0.35; Density: 1.40 g/cm3
Tensile Strength: 1,000 psi; Elongation: 3.5; Tear Strength: 18 N/mm; Compression Set: 0.3; Density: 1.35 g/cm3
Tensile Strength: 1,000 psi; Elongation: 3.5; Tear Strength: 20 N/mm; Compression Set: 0.33; Density: 1.50 g/cm3
Tensile Strength: 1,200 psi; Elongation: 5; Tear Strength: 23 N/mm; Compression Set: 0.3; Density: 1.25 g/cm3
Tensile Strength: 1,300 psi; Elongation: 8; Tear Strength: 0; Compression Set: 0.35; Density: 1.25 g/cm3
Tensile Strength: 1,500 psi; Elongation: 3.5; Tear Strength: 20 N/mm; Compression Set: 0.3; Density: 1.35 g/cm3
Tensile Strength: 1,500 psi; Elongation: 3.8; Tear Strength: 20 N/mm; Compression Set: 0.3; Density: 1.35 g/cm3
Tensile Strength: 1,800 psi; Elongation: 4.5; Tear Strength: 25 N/mm; Compression Set: 0.25; Density: 1.35 g/cm3
Tensile Strength: 100 psi; Temperature Range: -100° to 500° F; Specifications Met: ASTM D1056 2D3
Tensile Strength: 100 psi; Temperature Range: -40° to 160° F; Specifications Met: ASTM D1056 2C3
Tensile Strength: 12,000 psi.
Tensile Strength: 120,000 psi (1/4 thru 3/4’’ diams, all lengths)
Tensile Strength: 120,000 psi 1/4 thru 1 inch diams, all lengths) - 105,000 psi. (1-1/8 thru 1.5 inch diams, all lengths)
Tensile Strength: 120,000 psi. min.
Tensile Strength: 150,000 psi minimum
Tensile Strength: 150,000 psi. min, 1/4 – 1.5 inch diams)
Tensile Strength: 180,000 psi. min,
Tensile Strength: 2,250 psi
Tensile Strength: 2,500 psi; Elongation: 4; Tear Strength: 25 N/mm; Compression Set: 0.28; Density: 1.35 g/cm3
Tensile Strength: 225,000 psi. min.
Tensile Strength: 3,000 psi; Elongation: 4.5; Tear Strength: 50 N/mm; Compression Set: 0.25; Density: 1.25 g/cm3
Tensile Strength: 3,000 psi; Elongation: 6; Tear Strength: 22 N/mm; Compression Set: 0.25; Density: 1.05 g/cm3
Tensile Strength: 400 psi; Elongation: 2; Tear Strength: 16 N/mm; Compression Set: 0.38; Density: 1.50 g/cm3
Tensile Strength: 48,000 psi.
Tensile Strength: 60,000 psi.
Tensile Strength: 60,000 psi. min.
Tensile Strength: 70,000 psi; Thread Type: Metric; Thread Spacing: Coarse
Tensile Strength: 70,000 psi; Thread Type: UNC; Thread Spacing: Coarse
Tensile Strength: 70,000 psi; Thread Type: UNC; Thread Spacing: Coarse; Package Quantity: 5; Thread Fit: Class 2A; Thread Direction: Right Hand
Tensile Strength: 70,000 psi; Thread Type: UNF; Thread Spacing: Fine
Tensile Strength: 700 psi; Elongation: 4; Tear Strength: 15 N/mm; Compression Set: 0.3; Density: 1.25 g/cm3
Tensile Strength: 700 psi; Elongation: 4; Tear Strength: 17 N/mm; Compression Set: 0.2; Density: 1.25 g/cm3
Tensile Strength: 725 psi
Tensile Strength: 74,000 psi. (1/4 thru 3/4 diams, less than an equal to 6 inches) - 60,000 psi. (1/4 – 3/4 diams, greater than 6 inches & 7/8 thru 1.5 inch diams)
Tensile Strength: 74,000 psi. min. (#10 thru 1/2’’ diams.)
Tensile Strength: 800 N/mm2 (thru 16 mm diam.) 800 N/mm2 (over 16 mm diam.)
Tensile Strength: 800 psi; Elongation: 2.8; Tear Strength: 18 N/mm; Compression Set: 0.35; Density: 1.45 g/cm3
Tensile Strength:45,000 psi; HardnessRockwell B50
Tensile Strength:45,000 psi; HardnessRockwell B55; Specifications MetASTM B16
Tensile Strength:80,000 psi; HardnessRockwell B60; Specifications MetASTM A582
Tensile cords are specially engineered, twisted and helically wound
Tensile strength of 207 bar (> 3000 psi) maintains pore size and density, and will not stretch
Tensile strength of 44,000 psi, yield strength of 27,000 psi and brinell hardness of 72
Tensile strength of 6,300 psi to help resist unauthorized removal
Tensile strength: 1/4" to 5/8" 100,000 psi; 3/4" to 1" 85,000 psi
Tensile strength: 50-pounds
Tension spring stabilizes jaw and knurl adjusts easily
Tensioned and Balanced
Tensioner Assembly
Tensioner bearing
Tensioner on laces to prevent shoes coming untied mid race
Terminal
Terminal Blk/Strip Wiring Dev
Terminal Blocks
Terminal Gender: Male
Terminal Inserting Type
Terminal Strips - Nylon Insulated Terminal Strips avoid splicing and save time.
Terminal Type Blade
Terminal Type: Blade
Terminal connection type & Direct mounting type (can be surface-mounted with M20 Nut). Optional wall mounting bracket (sold separately): MAM-DS25
Terminal connection type & Pole mounting type (poles and mounting bases are sold separately)
Terminal protection at both ends regardless of how the battery is inserted
Terminal screws accept up to No. 12 AGW and Quickwire push-in terminals accept No. 14 AWG solid copper wire only
Terminal screws accept up to No. 12 AWG copper or copper-clad wire
Terminal screws accepts up to #12 AWG
Terminal screws: brass combination Slot/Phillips/Robertson binding head; accepts up to number 10 wire