Bullet_point (page 1096 / 1157)

Uses (3) 60-Watt candelabra bulbs
Uses (3) 60-Watt medium base bulbs
Uses (3) 60w candelabra base bulbs
Uses (4) 100-Watt medium base bulbs
Uses (5) 100-Watt medium base bulbs
Uses 1 (100W) Medium base bulbs
Uses 1 (150W) Medium base bulbs
Uses 1 (60W) Medium base bulbs
Uses 1 100W Type a bulb (not included)
Uses 1 60-watt bulb
Uses 1 candelabra base bulbs
Uses 1 gu24 base bulbs
Uses 1 light bulbs.
Uses 1 medium base bulbs
Uses 1 x 100 watt E26 medium base bulb (not included); led compatible
Uses 1 x 150W (E27) 3-way bulbs (not included)
Uses 1 x 60 watt E26 medium base bulb (not included); led compatible
Uses 1 x 60 watt E26 medium base bulbs (not included); led compatible
Uses 1 x 60W (E27) bulbs (not included)
Uses 1 x 60W E26 medium base Type a bulb (not included)
Uses 1 x 60W equivalent Type A medium base bulb (not included)
Uses 1.28 gallons of water per flush; meets today's strict water conservation standards
Uses 14 Watts of electricity
Uses 16 Watts of electricity
Uses 2 (100W) Medium base bulbs
Uses 2 (60W) Medium base bulbs
Uses 2 60-watt bulbs
Uses 2 medium base bulbs
Uses 2 x 60 watt E26 medium base bulbs (not included); led compatible
Uses 2 x 60W (E27) bulbs (not included)
Uses 23 Watts of electricity
Uses 230mm depth water bath (not included) for temperature-controlled testing
Uses 2400 pound clamp load pressure plate
Uses 254mm depth water bath (not included) for temperature-controlled testing
Uses 280mm depth water bath (not included) for temperature-controlled testing
Uses 3 (100W) Medium base bulbs
Uses 3 (60W) Candelabra base bulbs
Uses 3 (60W) Medium base bulbs
Uses 3 medium base bulbs
Uses 3 x 100 watt E26 Medium base bulbs (not included); LED compatible
Uses 3 x 60 watt E26 medium base bulbs (not included); led compatible
Uses 3 x 60W (E27) bulbs (not included)
Uses 4 (60W) Medium base bulbs
Uses 5° , 7° and 11° positive inserts
Uses 5°, 7° and 11° positive inserts
Uses 6 (60W) Medium base bulbs
Uses 75-percent less energy than incandescent/halogen lights
Uses Candelabra type bulbs.
Uses EBCs SB101C friction material which completely eliminates brake noise, improves the pads heat cycling capability and improves feel at the lever
Uses Gates belt...
Uses Hot Rods connecting rods
Uses Koyo bearings and races
Uses LED light bulb
Uses OE Hardware
Uses OEM hardware for a perfect fit. Made in the U.S.A
Uses OEM parts for safety, reliability, and performance
Uses Standard Base type bulbs.
Uses UV inks and UV clear coat protection for fade resistance
Uses XHS/XHS II Xchangeable Hub System - Hub kit sold separately
Uses a 60 watt maximum medium base bulb (sold separately)
Uses a rare earth magnet that is 4 times more powerful than common magnets
Uses a seamless working cylinder matched with a Teflon coated piston band for a positive seal and longer life
Uses a sophisticated color palette, focusing on antique shades and intricate design details
Uses a special heat treated ceramic coated aluminum oxide grain for cutting action and long life
Uses ambient air to condense A/C refrigerant from a gaseous state back to liquid state
Uses bolt-on center caps with counter sunk allen screws
Uses economical inserts with 3 cutting edges
Uses eight 60W candelabra bulbs
Uses existing hardware
Uses four 60W candelabra bulbs
Uses full complement bearings to handle high radial loads and caged needle bearings with one piece steel cage design, seals, bushings and collars
Uses high quality steel SCM 415/420 pins
Uses high venturi for maximum cooling capacity during high temperature, high load oepration.
Uses high-performance moly grease for additional protection against extreme temperatures and to keep vital components lubricated.
Uses include analytical lab samples, high purity chemicals, strong acids solvents, environmental samples, pharmaceuticals, and diagnostic reagents
Uses include high megabit applications such as Gigabit Ethernet
Uses include kitchen cabinet hardware, bathroom cabinet hardware and drawers
Uses include kitchen cabinet hardware, bathroom cabinet hardware and various furniture drawer and cabinet hardware
Uses inserts with 16 cutting edges (sold separately)
Uses inserts with four cutting edges (sold separately)
Uses inserts with four or eight cutting edges (sold separately)
Uses inserts with four, six, or eight cutting edges (sold separately)
Uses leading edge materials
Uses locking washer (sold separately) for accurate placement
Uses low-expansion, low-friction piston alloy resulting in an extend life span of the piston
Uses medium base bulbs
Uses nine 60W candelabra bulbs
Uses one 100 watt 3-way incandescent bulb
Uses one 100 watt A19 Med F incandescent light bulb
Uses one 100-watt Type A medium base incandescent bulb
Uses one 18 watt Quad Tube G24q 2 CFL light bulb
Uses one 50 watt MR16 GU10 120 volt halogen light bulb
Uses one 50 watt MR16 GU5.3 12 volt halogen light bulb
Uses one 60 Watt maximum medium-base light bulb, pair with an energy-efficient clear filament ST20 LED bulb to complement the design and enjoy energy-efficient illumination
Uses one 60 watt T10 incandescent bulb
Uses one 60-watt medium-base light bulb (not included), for an energy-efficient alternative, choose Westinghouse 60-watt equivalent LED bulbs
Uses one maximum 100 watt standard-medium base A19 bulb (not included).
Uses one maximum 100 watt standard-medium base bulb (not included).
Uses one maximum 150 watt type A bulb (not included). 3-way switch on socket.
Uses one maximum 150 watt type A bulb (not included). 3-way switch.