Bullet_point (page 1131 / 1157)

Wiper Edge with 6 Cutting Edges
Wiper flat on cutting edges for a smoother finish than conventional end mills
Wiper geometries available for high feeds and excellent surface finish
WiperStorage: Non-Volatile
Wipes Clean Easily with Damp Cloth
Wipes clean easily
Wipes clean with a damp cloth or sponge
Wipes clean with a damp sponge
Wipes on like furniture polish
Wiping stain applies evenly without blotching or constant stirring, recoat after 2 hours
Wire & Cable Marking
Wire Color: Green
Wire Connectors
Wire Decking
Wire Diameter / Overall Diameter: 0.0641" / 0.0970"
Wire Diameter / Overall Diameter: 0.0641" / 0.1050"
Wire Diameter / Overall Diameter: 0.0641" / 0.1410"
Wire Diameter: 0.015 in
Wire Diameter: 0.02 in
Wire Diameter: 0.025 in
Wire Diameter: 0.031 in
Wire Diameter: 0.04 in
Wire Diameter: 0.062 in
Wire Edge Holds Shape
Wire Entry from Either Side
Wire Entry from Either Side of connector
Wire Finish Type: Black Epoxy
Wire Finish Type: Blue Epoxy
Wire Finish Type: Chrome
Wire Finish Type: Clear Epoxy
Wire Finish Type: Galvanized Steel
Wire Finish Type: Green Epoxy
Wire Finish Type: Silver Epoxy
Wire Guard NOT included
Wire Guard from the R Series collection
Wire Lead Switches for Fast and Easy Installation
Wire Management
Wire Management Provisions
Wire Mesh
Wire Mesh Collection
Wire Mesh Grips
Wire Pigtail Includes 6 Inches Of Factory Color Wire
Wire Pull
Wire Rope Clip
Wire Set
Wire Shelving Add-On Kit
Wire Shelving Starter Kit
Wire Size: 10 AWG to 12 AWG
Wire Size: 14 AWG to 16 AWG
Wire Size: 16 AWG to 22 AWG
Wire Strippers
Wire Type : HOOKUP
Wire allows air to circulate an d light to penetrate for increased product visibility
Wire allows air to circulate and light to penetrate for increased product visibility
Wire cart cover with zipper flap
Wire cloth stretches, sags or even tears, and abrasive materials reduce wire diameter, causing an increase in opening size and loss of accuracy over time
Wire collated smooth shank
Wire conduct is standard, 4 tight twisted pairs consist of 8 cores, and the wire distance is totally accord with CAT5e standard
Wire conduct is standard, 4 tight twisted pairs consist of 8 cores, and the wire distance is totally accord with Cat5 standard.
Wire edge holds shape
Wire for each cylinder is labeled
Wire formed
Wire gripper holds wire securely in position
Wire guide ensures pairs stay in proper order for fast, easy termination
Wire harness features a durable outer sleeve that protects wires from abrasion, kinking, and other types of damage
Wire holes are stacked to minimize width
Wire identification and insulation purposes
Wire in rim
Wire lead connection
Wire management system includes leg and desktop grommets with a channel on the modesty panel to keep cables under control
Wire marking sleeve is made of heat shrinkable (2: 1) polyolefin
Wire marking sleeve is made of heat shrinkable (2:1) polyolefin
Wire marking sleeve is made of heat shrinkable (2:1), halogen free flame retardant polyolefin
Wire marking sleeve is made of irradiated polyolefin heat shrink tubing
Wire marking sleeve is made of irradiated polyvinylidene fluoride heat shrink tubing
Wire mesh lines the inside of the firepit to prevent sparks and embers escaping through the cutout design
Wire range or stud size: 1000-250
Wire range or stud size: 350-#6 AWG/kcmiL
Wire range or stud size: 500-#4
Wire range or stud size: 500-#4 AWG/kcmiL
Wire range or stud size: 600-#2 AWG/kcmiL
Wire shelves are made of welded steel and reinforced with wire trusses for strength, and they adjust in 1" increments to accommodate items of varying height
Wire shelves easily adjust without tools and align accurately at 1" increments. Reinforced shelves with welded surface ribs for added strength, 600-800 lb shelf capacity.
Wire shelving posts sold separately
Wire size: 1.8mm spacing size: 6.7mm x 6.7mm
Wire strip length 5/16"
Wire strip length 5/16-inches
Wire to rebar conductor
Wire up and connect this baseboard quickly and easily with its large wiring compartment, dual knockouts and built-in cable clamp.
Wire...
Wire/Terminal Marker
Wire: 24 AWG.
Wire:3
WireCrafters Woven wire mesh partition panels are constructed of 10 gauge wire, woven into a 2" x 1" rectangular mesh design
WireGauge: AWG 14-30
WireGauge: AWG 22-12
WireGauge: AWG 28-12
Wired
Wired edge that allows bending and shaping
Wired: TSB 568B (AT&T 258A)