Bullet_point (page 1144 / 1157)

[STRONG & DURABLE] Supported by a stand constructed from strong and durable iron

[STRONG DURABILITY AGAINST RUST] - Long lasting surface treatment is applied by electro deposition coating method that is comparable to the OE level to prevent rust.

[STURDY METAL BASE] -- Provides a solid surface that won't warp or crack

[SUPERIOR CONSTRUCTION] Higher, more uniformed filament density for longer brush life with more cutting points

[Sturdy, Colorful and Glare Free] Longlasting quality materials for years of puzzling enjoyment. Vivid colors with matte finish for an easy-to-clean surface.

[TAKE IT OUT, HOSE IT DOWN, CARRY ON] — X-act Contour is flexible and easy to remove and clean up; spray it down, shake it off, and it’s back on the job. Proudly made in the USA, warrantied for life.

[TECHNICAL ATTRIBUTES] Compression Deflection: 0.9 psi, Density: 3 lbs / cu. ft., Tensile Strength: 18 psi, Temperature Range: -5° to 180° F, Specifications Met: CAL 117.

[TECHNICAL ATTRIBUTES] Compression Deflection: 1.1 psi, Density: 2 lbs / cu. ft., Tensile Strength: 19 psi, Temperature Range: -5° to 180° F, Specifications Met: CAL 117.

[TECHNICAL ATTRIBUTES] Compression Deflection: 1.5 psi, Density: 3 lbs / cu. ft., Tensile Strength: 26 psi, Temperature Range: -5° to 180° F, Specifications Met: CAL 117.

[TECHNICAL ATTRIBUTES] Compression Deflection: 14 psi, Density: 4 lbs / cu. ft., Adhesive Temperature Range: -30° to 230° F, Tensile Strength: 85 psi, Temperature Range: -40° to 225° F, Specifications Met: FMVSS302.

[TECHNICAL ATTRIBUTES] Compression Deflection: 14 psi, Density: 4 lbs / cu. ft., Tensile Strength: 85 psi, Temperature Range: -40° to 225° F, Specifications Met: FMVSS302.

[TECHNICAL ATTRIBUTES] Material Dynamic Load Capacity: 140 N/mm2, Material Static Load Capacity: 250 N/mm2, Max Sliding Speed - Dry: 2.5 m/s, Coefficient of Friction - Dry: 0.02 to 0.20, Temperature Range: -320 to 530°F.

[TECHNICAL ATTRIBUTES] Tensile Strength: 1,000 psi, Elongation: 350%, Tear Strength: 20 N/mm, Compression Set: 33%, Density: 1.50 g/cm3, Temperature Range: -30° to 250° F, Adhesive Temperature Range: -30° to 230° F, Specifications Met: ASTM D2000 BC 707.

[TECHNICAL ATTRIBUTES] Tensile Strength: 1,000 psi, Elongation: 350%, Tear Strength: 20 N/mm, Compression Set: 33%, Density: 1.50 g/cm3, Temperature Range: -30° to 250° F, Specifications Met: ASTM D2000 BC 707.

[TECHNICAL ATTRIBUTES] Tensile Strength: 1,000 psi, Elongation: 380%, Tear Strength: 20 N/mm, Compression Set: 28%, Density: 1.5 g/cm3, Temperature Range: -30° to 200°F, Specifications Met: ASTM D2000 BA 607, UL 94 V0.

[TECHNICAL ATTRIBUTES] Tensile Strength: 1,200 psi, Elongation: 350%, Tear Strength: 20 N/mm, Compression Set: 28%, Density: 1.6 g/cm3, Temperature Range: -30° to 200°F, Specifications Met: ASTM D2000 BC 508.

[TECHNICAL ATTRIBUTES] Tensile Strength: 1,200 psi, Elongation: 380%, Tear Strength: 20 N/mm, Compression Set: 28%, Density: 1.5 g/cm3, Temperature Range: -30° to 200°F, Adhesive Temperature Range: -30° to 230° F, Specifications Met: ASTM D2000 BC 608.

[TECHNICAL ATTRIBUTES] Tensile Strength: 1,200 psi, Elongation: 380%, Tear Strength: 20 N/mm, Compression Set: 28%, Density: 1.5 g/cm3, Temperature Range: -30° to 200°F, Specifications Met: ASTM D2000 BC 608.

[TECHNICAL ATTRIBUTES] Tensile Strength: 1,500 psi, Elongation: 380%, Tear Strength: 20 N/mm, Compression Set: 30%, Density: 1.35 g/cm3, Temperature Range: -30° to 250°F, Adhesive Temperature Range: -30° to 230° F, Specifications Met: ASTM D2000 BC 710.

[TECHNICAL ATTRIBUTES] Tensile Strength: 1,500 psi, Elongation: 380%, Tear Strength: 20 N/mm, Compression Set: 30%, Density: 1.35 g/cm3, Temperature Range: -30° to 250°F, Specifications Met: ASTM D2000 BC 710.

[TECHNICAL ATTRIBUTES] Tensile Strength: 15,200 psi, Impact Strength: 1.0 ft. - lbs./in., Coefficient of Friction: 0.42, Water Absorption: 0.25%, Surface Resistivity: 10^13 ohms-cm., Hardness: Rockwell M109, Density: 0.045 lbs/cu. in., Temperature Range: -20° to 330° F.

[TECHNICAL ATTRIBUTES] Tensile Strength: 2,500 psi, Elongation: 400%, Tear Strength: 25 N/mm, Compression Set: 28%, Density: 1.35 g/cm3, Temperature Range: -30° to 250° F, Specifications Met: ASTM D2000 BC 617.

[TECHNICAL ATTRIBUTES] Tensile Strength: 4,200 psi, Impact Strength: 1.2 ft. - lbs./in., Coefficient of Friction: 0.5, Water Absorption: 0.01%, Hardness: Rockwell M85, Density: 0.033 lbs/cu. in., Temperature Range: 0° to 180° F, Specifications Met: FDA, UL 94 HB.

[TECHNICAL ATTRIBUTES] Tensile Strength: 700 psi, Elongation: 150%, Tear Strength: 28 N/mm, Compression Set: 15%, Density: 2.00 g/cm3, Temperature Range, Adhesive Temperature Range: -30° to 230° F, Specifications Met: ASTM D2000 HK 705, FDA.

[TECHNICAL ATTRIBUTES] Tensile Strength: 700 psi, Elongation: 150%, Tear Strength: 28 N/mm, Compression Set: 15%, Density: 2.00 g/cm3, Temperature Range, Specifications Met: ASTM D2000 HK 705, FDA.

[TECHNICAL ATTRIBUTES] Tensile Strength: 8,500 psi, Impact Strength: 23.0 ft. - lbs./in., Coefficient of Friction: 0.53, Water Absorption: 0.35%, Hardness: Rockwell R115, Density: 0.043 lbs/cu. in., Temperature Range: -40° to 240° F, Specifications Met: UL 94 V-2.

[TECHNICAL ATTRIBUTES] Tensile Strength: 870 psi, Elongation: 400%, Tear Strength: 15 N/mm, Compression Set: 30%, Density: 1.25 g/cm3, Temperature Range: -80° to 450° F, Specifications Met: ASTM D2000 GE 306, FDA 21 CFR 177.2600, MIL-A-A-59588 Type 2A.

[TECHNICAL ATTRIBUTES] Tensile Strength: 9,600 psi, Impact Strength: 1.2 ft. - lbs./in., Coefficient of Friction: 0.2, Water Absorption: 0.25%, Hardness: Rockwell M94, Density: 0.051 lbs/cu. in., Temperature Range: -20° to 180° F.

[TECHNICAL ATTRIBUTES] Tensile Strength: 9,600 psi, Impact Strength: 1.2 ft.-lbs/in., Coefficient of Friction: 0.2, Water Absorption: 0.25%, Density: 0.051 lbs/cu. in., Hardness: Rockwell M94, Temperature Range: -20° to 180° F.

[TOUGH NEVER FELT SO SOFT] — Rubberized DuraGrip construction yields the perfect balance of strength & pliability, not that hard “plastic” feel of lesser liners.

[TRIDENT GRIP JAM PROTECTION] -- Reduces jams and eliminates frustration

[TURBINE STYLE]- Features a high density filament that is ideal for short cycle times and longer tool life

[Test and Validated] Trusted quality and performance from The Clutch Guys

[VARIOUS APPLIANCES] Delrin Acetal Homopolymer Plastic Rod are typically used in parts that require precision such as gears, bushings, and bearings.

[VARIOUS APPLIANCES] Delrin Acetal Homopolymer is often used to make precision gears, bushings, and bearings.

[VARIOUS APPLIANCES] Food Grade Silicone is often used for high intensity stress resistance in food environments. It can also be used to manufacture gaskets and seals used in industrial cooking appliances.

[VARIOUS APPLIANCES] Neoprene Rubber is often used as a multi-purpose rubber for sealing, gasketing and weather stripping.

[VARIOUS APPLIANCES] Polyethylene foam is a versatile material with good chemical resistance that is used for shock absorption and cushioning.

[VARIOUS APPLIANCES] Polypropylene is often fabricated into containers and parts for laboratory equipment.

[VARIOUS APPLIANCES] Polyurethane foam is a versatile material used for shock absorption and cushioning. It is a common choice for packaging and insulation applications.

[VARIOUS APPLIANCES] This Viton is made of FDA complaint materials for food, beverage, and pharmaceutical applications.

[VARIOUS APPLIANCES] This formulation is stronger and more durable than both Standard and High Strength Neoprene for the most demanding applications.

[VARIOUS APPLIANCES] This formulation is stronger and more durable than standard Buna-N for more demanding applications.

[VARIOUS APPLIANCES] This formulation is stronger and more durable than standard Neoprene for more demanding applications.

[VARIOUS APPLIANCES] This formulation of EPDM is fire retardant and is often used as weather-resistant seals on windows and doors. It is particularly well suited for use in applications with steam and water.

[VARIOUS APPLIANCES] This formulation of Neoprene dispels electrical charges and is often used to protect sensitive equipment.

[VARIOUS APPLIANCES] This formulation of Neoprene is flame-retardant and often placed between panels to minimize vibrations and external noises.

[VARIOUS APPLIANCES] UHMW Polyethylene is often used to make machine guards and chute liners.

[VARIOUS APPLIANCES] Ultem PEI is often used for circuit-breaker housings, manifolds, and semiconductor components.

[VARIOUS APPLIANCES] Use Class 250 fittings in medium-pressure applications. Brass is a cost effective alternative to Stainless Steel as it offers similar corrosion resistance.

[VARIOUS APPLIANCES] Widely used in industrial machine, motorcycle, automobile, power tools and mechanical equipment.

[WARRANTY]: This cast-iron bathtub comes with a 3 year limited manufacturer's warranty. For further details, please navigate to the documents section of the listing.

[WARRANTY]: We adhere to the highest manufacturing standards, and as such this specific model comes with a 3 year limited manufacturer's warranty.

[WARRANTY]: We adhere to the highest manufacturing standards, and as such, this specific model comes with a 5 year limited manufacturer's warranty.

[WASHABLE] Zippered Removable, washable cushion covers

[WE ARE OE] - Designed and manufactured by CTR, a Korean OE supplier manufacturing premium aftermarket replacement parts that match OEM requirements around the world. Rest assured with the peace of mind knowing that we will help you with our OE-standard quality.

[WE ARE OE] Designed and manufactured by CTR, an OE supplier for multiple major car makers around the world. Rest assured knowing this part comes from a manufacturer whose OEM parts are used in 33% of US vehicles that hit the streets.

[Warranty]: Backed by a Lifetime guarantee

[Wicker] Handwoven and handcrafted Wicker material by outstanding craftsmen

a Fishing Must for a Pro

a necessity for any pastry chef

aFe Filters a trusted industry leader

aFe Quality

aR characteristic for semiconductor short- circuit protection

above to make sure this fits.

abrasion resistance and thermal stability

accents

adjustable deadbolt

adjustable flame flickering affect, thermostat, and timer with remote control-uses two AAA batteries not supplied

adjustable latch

advanced, self–pressurizing technology channels water through the showerhead with three times more spray power for a more thorough rinse

aerated stream

aerated stream for everyday cleaning

affordable proucdts

affordable solution

affordable solutions

aisin is the number one original equipment manufacturer of water pumps in the world

aisin's advanced design produces water pumps with smooth coolant flow channels, efficient rotors, ball bearings, and carbon ceramic mechanical sealing for optimum cooling performance and longevity

all new components, engineered to standards equal to or better than oe originals, are used to manufacture our hub assemblies

all required hardware included for easy installation

all tubing is manufactured from high grade steel and electroplated with a zinc coating (chromium iii), delivering superior corrosion and rust resistance against elements such as high humidity, road salt, water, and grime

all tubing is manufactured from high grade steel, with zinc electroplate coating, providing corrosion and rust resistance against elements such as moisture and acidity

all tubing is manufactured from high grade steel, with zinc electroplate coating, providing corrosion and rust resistance against elements such as moisture and acidity.

all weather protection - the 3d maxpider kagu series floor liners are designed to provide complete automotive interior protection from dirt, mud, salt, rain, snow and keep your vehicle’s floor clean and pristine in all seasons.

all yukon ring and pinion sets come standard with a one-year warranty

aluminum

aluminum alloy.

aluminum die-cast technology allows for size and weight reduction

aluminum fabrication and robust mounting systems creates a hard part that is at the top of its class for safeguarding your motorcycle.

an economical OE replacement shock for both passenger car and truck applications

and aftermarket seats on the market.

and comfort in your daily ride

and filter baskets.

anged shank allows for use with ASA split sleeve drivers

anodized and kanizen plating of cylinder bodies strengthens surface ensuring smooth operation of the piston and resists corrosion

appliance-replacement-parts

application-specific brackets ensure proper fit and function

approved resin