Note (page 1 / 3)

* Final tightening cannot be performed with the ball point part.

0.15 W.G. (Initial Resistance)

0.16 W.G. (Initial Resistance)

0.16 W.G. (Initial Resistance) / 1.50 W.G. (Final Resistance)

0.17 W.G. (Initial Resistance)

0.18 W.G. (Initial Resistance)

0.19 W.G. (Initial Resistance)

0.20 W.G. (Initial Resistance)

0.21 W.G. (Initial Resistance)

0.22 W.G. (Initial Resistance)

0.23 W.G. (Initial Resistance)

0.24 W.G. (Initial Resistance)

0.25 W.G. (Initial Resistance)

0.25 W.G. (Initial Resistance) / 1.50 W.G. (Final Resistance)

0.26 W.G. (Initial Resistance)

0.27 W.G. (Initial Resistance)

0.28 W.G. (Initial Resistance) / 1.50 W.G. (Final Resistance)

0.29 W.G. (Initial Resistance)

0.31 W.G. (Initial Resistance)

0.32 W.G. (Initial Resistance)

0.34 W.G. (Initial Resistance)

0.35 W.G. (Initial Resistance)

0.35 W.G. (Initial Resistance) / 1.50 W.G. (Final Resistance)

0.38 W.G. (Initial Resistance)

0.48 W.G. (Initial Resistance) / 1.50 W.G. (Final Resistance)

100 FEET PER ROLL STANDARD LENGTH

1000 Beta Ratio (?)

2 CASE MINIMUM ORDER QUANTITY

2 Required Per Pump

20 Beta Ratio (?)

200 Beta Ratio (?)

3 pcs - 1 Connector, 1 Nut, 1 O-Ring

42 is the Part Designation Number for 1/2" and 3/4" Mini Size Gasket

5.0 square feet per 10 inches in length

6 pcs - 1 Connector, 1 Backshell, 1 Cage Clamp, 1 Clamp Nut, 1 Gland, 1 O-Ring

6.0 square feet per 10 inches filter length

94.5% Oxygen Index

?Glossy Gold and Glossy Chrome finishes may tarnish or peel if left outdoors for extended time periods.

AC Input Clips Sold Separately

AC Power Cord Included

AC Power Cord Sold Separately

ANSI B16.56 & ASTM A-105

Accepts Double Open-End (DOE) cartridges

Accepts double open-ended (DOE) style cartridges

All SENTRY housings are made in the USA, and each unit is tested at design pressure or higher to assure proper function and leak-free operation.

All have 45 degree lip except BSF Flat.

All sizes require a retaining ring.

All values are typical (tolerance +/- 10%)

All valve tests 110?F to 120?F - Oil Viscosity 150 S.S.U. at 100?F

All valve tests 110?F to 120?F - Oil Viscosity 150 S.S.U. at 100?F / 303 Stainless Steel piston and Teflon O-rings standard with VSS Series Valves

Annealed Soda Lime Glass/Windows

Available in 12 mil light gauge and 20 mil medium gauge wall for added strength

Available in EPDM, SBR, Nitrile and Neoprene and a large variety of diameters available ranging from 1-1/4" to 24" upon request (42 Durometer)

Available in EPDM, SBR, Nitrile and Neoprene and a large variety of diameters available ranging from 1-1/4" to 24" upon request (50 Durometer)

Available in EPDM, SBR, Nitrile and Neoprene and a large variety of diameters available ranging from 1-1/4" to 24" upon request (60 Durometer)

Available in EPDM, SBR, Nitrile and Neoprene and large variety of diameters available ranging from 1-1/4" to 24" upon request. (42 Durometer)

Available in EPDM, SBR, Nitrile and Neoprene and large variety of diameters available ranging from 1-1/4" to 24" upon request. (50 Durometer)

Available with and without encapsulated wire

BW Items are Dual Purpose; Butt Weld to Schedule 40 Pipe or Socket Weld to Nominal OD Tubing

Battery packs made with NIMH cells include a thermostat.

Bevel Seat Nut must be ordered seperately.

Blucor? bolt-on split flange couplings.

By clicking Buy You agree: You are a product/software developer/system integrator; kit is for evaluation only, not for resale.

CAUTION: Not to be used as an insulator

CAUTION: Not to be used as an insulator, non-reinforced

CLEARBRAID? is a registered trademark of Accuflex Industrial Hose, Ltd. and is used under license by Kuriyama of America, Inc.

Cam arms are made of 300 series Stainless Steel

Cam arms are made of Brass

Cannot be used in place of SFC50!

Chemically resistant PTFE diaphragm comes standard on all units. All valves come with PVC Top.

Chemically resistant PTFE diaphragm comes standard on all units. All valves come with PVC Top. Optional 350 psi rated valve available.

Clamps are sold in box quantities only.

Comes standard with EPDM NH Thread Gasket and Buna-N cam gasket.

Comes standard with a Buna Fuel Resistant straight thread gasket and Buna-N cam gasket.

Comes standard with a Buna Fuel Resistant straight thread gasket.

FirstPrev 1 2 3 Next Last