Vibration

0.5 mm Amplitude, 10 to 55 Hz Frequency
0.7 mm amplitude at frequency of 10 to 55Hz (for 1 min), 20 sweeps in each X, Y, Z direction
1 mm Amplitude, 10 to 55 Hz Frequency
1.52 mm for all processes 10 - 55 - 10
1.5mm amplitude (max. acceleration 196m/s?) at frequency of 10 to 2,000Hz in each X, Y, Z direction for 2 hours
1.5mm amplitude at frequency of 10 to 55Hz (for 1 min) in each X, Y, Z direction for 2 hours
10 - 55 Hz, amplitude 1 mm
10 g Over 10 Hz to 2 kHz
10 to 2000Hz / 10g, EIA/TIA-455-11, Condition III and 10 to 2000Hz / 20g / 9g RMS Avg, EIA/TIA-455-11, Condition IV
10 to 2000Hz / 15g / EIA/TIA-455-11; Cond. III
10 ~ 55 Hz 19.6 m/s2 or lower
10-55 Hz at 0.35 mm
10-55Hz, 10m/s2 for 2 hours
1000G
10G (20 to 2000Hz)
10G's, 10 ? 500Hz
10G's, 5 ? 1000Hz
10g-force (20-2000 Hz)
15 g Over 10 Hz to 2 kHz
15G's, 10 ? 2000Hz
2 g (IEC 60068-2-6)
2.5 m/s2 [Max]
20G's, 10 ? 2000Hz
20G's, 10 ? 2500Hz
20G's, 33 ? 3000Hz
20G's, 57 ? 3000Hz
20G's, 75 ? 3000Hz
30 g
30 g Over 10 Hz to 2 kHz
30 g Over 20 Hz to 2 kHz
30 gn
30G's, 10 ? 3000Hz
30G's, 33 ? 3000Hz
30G's, 70 ? 3000Hz
5G's, 0 - 500Hz
7 gn +/-0.75 mm (10 to 55 Hz)
7, 7 gn
IEC 60068-2-6
IEC 60068-2-6, 11 to 200 Hz, 3 g above 25 Hz operating, 3 axes
IEC 68-2-27 (MIL STD 810D), 3 g, any axis, 11-200 Hz
MIL-STD-202F req. Method 201A (vibration:10 to 60Hz max., double amplitude 0.06", max acc. 10G).
MIL-STD-202G req. Method 201A (vibration:10 to 60Hz max., double amplitude 0.06", max acc. 10G).