Overall Length = 103 mm (page 1 / 1)

Cutting chisel edge with high centring accuracy due to strong core and special point geometry. High roundness and alignment accuracy of the deep hole- thanks to 4 guide chamfers. Outstanding chip evacuation due to 4 internal cooling channels from dia 3.8 mm. Up to 3.7 mm dia with 2 internal cooling channels. Straight major cutting edges with honed edges and special flute profile for short chips- even on long chipping materials. Attention: Sizes ending with X = cutter dia tolerance h7. Note: Flute length LC = L2 + 1.5 x DC. Standard: DIN 6537 Tolerance nominal dia : m6 Number of cutting edges Z: 2 Tolerance nominal dia : m6 recommended maximum drilling depth L2: 46.5 mm Overall length L: 103 mm Shank dia Ds: 10 mm Feed f in stainless steel > 900N/mm2: 0.15 mm/rev.

Cutting chisel edge with high centring accuracy due to strong core and special point geometry. High roundness and alignment accuracy of the deep hole- thanks to 4 guide chamfers. Outstanding chip evacuation due to 4 internal cooling channels from dia 3.8 mm. Up to 3.7 mm dia with 2 internal cooling channels. Straight major cutting edges with honed edges and special flute profile for short chips- even on long chipping materials. Attention: Sizes ending with X = cutter dia tolerance h7. Note: Flute length LC = L2 + 1.5 x DC. Standard: DIN 6537 Tolerance nominal dia : m6 Number of cutting edges Z: 2 Tolerance nominal dia : m6 recommended maximum drilling depth L2: 46.6 mm Overall length L: 103 mm Shank dia Ds: 10 mm Feed f in stainless steel > 900N/mm2: 0.15 mm/rev.

Cutting chisel edge with high centring accuracy due to strong core and special point geometry. High roundness and alignment accuracy of the deep hole- thanks to 4 guide chamfers. Outstanding chip evacuation due to 4 internal cooling channels from dia 3.8 mm. Up to 3.7 mm dia with 2 internal cooling channels. Straight major cutting edges with honed edges and special flute profile for short chips- even on long chipping materials. Attention: Sizes ending with X = cutter dia tolerance h7. Note: Flute length LC = L2 + 1.5 x DC. Standard: DIN 6537 Tolerance nominal dia : m6 Number of cutting edges Z: 2 Tolerance nominal dia : m6 recommended maximum drilling depth L2: 46.8 mm Overall length L: 103 mm Shank dia Ds: 10 mm Feed f in stainless steel > 900N/mm2: 0.15 mm/rev.

Cutting chisel edge with high centring accuracy due to strong core and special point geometry. High roundness and alignment accuracy of the deep hole- thanks to 4 guide chamfers. Outstanding chip evacuation due to 4 internal cooling channels from dia 3.8 mm. Up to 3.7 mm dia with 2 internal cooling channels. Straight major cutting edges with honed edges and special flute profile for short chips- even on long chipping materials. Attention: Sizes ending with X = cutter dia tolerance h7. Note: Flute length LC = L2 + 1.5 x DC. Standard: DIN 6537 Tolerance nominal dia : m6 Number of cutting edges Z: 2 Tolerance nominal dia : m6 recommended maximum drilling depth L2: 46.9 mm Overall length L: 103 mm Shank dia Ds: 10 mm Feed f in stainless steel > 900N/mm2: 0.15 mm/rev.

Cutting chisel edge with high centring accuracy due to strong core and special point geometry. High roundness and alignment accuracy of the deep hole- thanks to 4 guide chamfers. Outstanding chip evacuation due to 4 internal cooling channels from dia 3.8 mm. Up to 3.7 mm dia with 2 internal cooling channels. Straight major cutting edges with honed edges and special flute profile for short chips- even on long chipping materials. Attention: Sizes ending with X = cutter dia tolerance h7. Note: Flute length LC = L2 + 1.5 x DC. Standard: DIN 6537 Tolerance nominal dia : m6 Number of cutting edges Z: 2 Tolerance nominal dia : m6 recommended maximum drilling depth L2: 47.8 mm Overall length L: 103 mm Shank dia Ds: 10 mm Feed f in stainless steel > 900N/mm2: 0.15 mm/rev.

Cutting chisel edge with high centring accuracy due to strong core and special point geometry. High roundness and alignment accuracy of the deep hole- thanks to 4 guide chamfers. Outstanding chip evacuation due to 4 internal cooling channels from dia 3.8 mm. Up to 3.7 mm dia with 2 internal cooling channels. Straight major cutting edges with honed edges and special flute profile for short chips- even on long chipping materials. Attention: Sizes ending with X = cutter dia tolerance h7. Note: Flute length LC = L2 + 1.5 x DC. Standard: DIN 6537 Tolerance nominal dia : m6 Number of cutting edges Z: 2 Tolerance nominal dia : m6 recommended maximum drilling depth L2: 48 mm Overall length L: 103 mm Shank dia Ds: 10 mm Feed f in stainless steel > 900N/mm2: 0.15 mm/rev.

Cutting chisel edge with high centring accuracy due to strong core and special point geometry. High roundness and alignment accuracy of the deep hole- thanks to 4 guide chamfers. Outstanding chip evacuation due to 4 internal cooling channels from dia 3.8 mm. Up to 3.7 mm dia with 2 internal cooling channels. Straight major cutting edges with honed edges and special flute profile for short chips- even on long chipping materials. Attention: Sizes ending with X = cutter dia tolerance h7. Note: Flute length LC = L2 + 1.5 x DC. Standard: DIN 6537 Tolerance nominal dia : m6 Number of cutting edges Z: 2 Tolerance nominal dia : m6 recommended maximum drilling depth L2: 48.7 mm Overall length L: 103 mm Shank dia Ds: 10 mm Feed f in stainless steel > 900N/mm2: 0.15 mm/rev.

Cutting chisel edge with high centring accuracy due to strong core and special point geometry. High roundness and alignment accuracy of the deep hole- thanks to 4 guide chamfers. Outstanding chip evacuation due to 4 internal cooling channels from dia 3.8 mm. Up to 3.7 mm dia with 2 internal cooling channels. Straight major cutting edges with honed edges and special flute profile for short chips- even on long chipping materials. Attention: Sizes ending with X = cutter dia tolerance h7. Note: Flute length LC = L2 + 1.5 x DC. Standard: DIN 6537 Tolerance nominal dia : m6 Number of cutting edges Z: 2 recommended maximum drilling depth L2: 47.4 mm Tolerance nominal dia : m6 Overall length L: 103 mm Shank dia Ds: 10 mm Feed f in stainless steel > 900N/mm2: 0.15 mm/rev.

Pillow Block Bearing,Ball,35mm Bore

Pro Steel Solid Carbide Drill, 11/32 inch Dia, 140 Deg Point Angle, TiAlN Coated, Plain Shank

Pro Steel Solid Carbide Drill, 8.6 mm Dia, 140 Deg Point Angle, TiAlN Coated, Plain Shank

Pro Steel Solid Carbide Drill, 8.9 mm Dia, 140 Deg Point Angle, TiAlN Coated, Plain Shank

Pro Steel Solid Carbide Drill, 9.25 mm Dia, 140 Deg Point Angle, TiAlN Coated, Plain Shank

Pro Steel Solid Carbide Drill, 9.3 mm Dia, 140 Deg Point Angle, TiAlN Coated, Plain Shank

Pro Steel Solid Carbide Drill, 9.8 mm Dia, 140 Deg Point Angle, TiAlN Coated, Plain Shank

RUKO TOOLS, 2 Hole Sizes, 1 9/16 in to 2 3/18 in, Tube and Sheet Drill - 783YN0|101006F - Grainger

Ruko Tools

SOCKET, 12 PT, CUSHION GRIP, SILVER, 80 MM X 1 IN DR, CHROME VANADIUM STEEL

Solid Carbide Drill w/Coolant,8.5 dia.

Solid Carbide Drill w/Coolant,8.8 dia.

Solid Carbide Drill, 10 mm Dia, 140 Deg Point Angle, AlTiN-Si Coated, Plain Shank

Solid Carbide Drill, 10 mm Dia, 140 Deg Point Angle, TiAlN Coated, Plain Shank

Solid Carbide Drill, 3/8 mm Dia, 140 Deg Point Angle, TiAlN Coated, Plain Shank

Solid Carbide Drill, 8.05 mm Dia, 140 Deg Point Angle, TiAlN Coated, Plain Shank

Solid Carbide Drill, 8.1 mm Dia, 140 Deg Point Angle, TiAlN Coated, Plain Shank

Solid Carbide Drill, 8.15 mm Dia, 140 Deg Point Angle, TiAlN Coated, Plain Shank

Solid Carbide Drill, 8.3 mm Dia, 140 Deg Point Angle, TiAlN Coated, Plain Shank

Solid Carbide Drill, 8.4 mm Dia, 140 Deg Point Angle, TiAlN Coated, Plain Shank

Solid Carbide Drill, 8.5 mm Dia, 140 Deg Point Angle, TiAlN Coated, Plain Shank

Solid Carbide Drill, 8.6 mm Dia, 140 Deg Point Angle, TiAlN Coated, Plain Shank

Solid Carbide Drill, 8.9 mm Dia, 140 Deg Point Angle, AlTiN-Si Coated, Plain Shank

Solid Carbide Drill, 8.9 mm Dia, 140 Deg Point Angle, TiAlN Coated, Plain Shank

Solid Carbide Drill, 9 mm Dia, 140 Deg Point Angle, TiAlN Coated, Plain Shank

Solid Carbide Drill, 9.1 mm Dia, 140 Deg Point Angle, AlTiN-Si Coated, Plain Shank

Solid Carbide Drill, 9.1 mm Dia, 140 Deg Point Angle, TiAlN Coated, Plain Shank

Solid Carbide Drill, 9.3 mm Dia, 140 Deg Point Angle, TiAlN Coated, Plain Shank

Solid Carbide Drill, 9.35 mm Dia, 140 Deg Point Angle, AlTiN-Si Coated, Plain Shank

Solid Carbide Drill, 9.35 mm Dia, 140 Deg Point Angle, TiAlN Coated, Plain Shank

Solid Carbide Drill, 9.4 mm Dia, 140 Deg Point Angle, AlTiN-Si Coated, Plain Shank

Solid Carbide Drill, 9.7 mm Dia, 140 Deg Point Angle, AlTiN-Si Coated, Plain Shank

Solid Carbide Drill, 9.9 mm Dia, 140 Deg Point Angle, TiAlN Coated, Plain Shank

Spec

Stellar Industrial | YG-1 DGR495084 DGR495 High Feed Metric Long Length Dream Drill With Through Coolant, 8.4 mm Drill - Metric, 0.3307 in Drill - Decimal Inch, 103 mm OAL, Micrograin Carbide, H-Coated

Stellar Industrial | YG-1 DGR495085 High Feed Metric Long Length Dream Drill With Through Coolant, 8.5 mm Drill - Metric, 0.3346 in Drill - Decimal Inch, 103 mm OAL, Micrograin Carbide, H-Coated

Stellar Industrial | YG-1 DGR495089 High Feed Metric Long Length Dream Drill With Through Coolant, 8.9 mm Drill - Metric, 0.3503 in Drill - Decimal Inch, 103 mm OAL, Micrograin Carbide, H-Coated

Stellar Industrial | YG-1 DGR495090 High Feed Metric Long Length Dream Drill With Through Coolant, 9 mm Drill - Metric, 0.3543 in Drill - Decimal Inch, 103 mm OAL, Micrograin Carbide, H-Coated

Stellar Industrial | YG-1 DGR495094 DGR495 High Feed Metric Long Length Dream Drill With Through Coolant, 9.4 mm Drill - Metric, 0.37 in Drill - Decimal Inch, 103 mm OAL, Micrograin Carbide, H-Coated

Stellar Industrial | YG-1 DGR495095 DGR495 High Feed Metric YG-1 Long Length Dream Drill With Through Coolant, 9.5 mm Drill - Metric, 0.374 in Drill - Decimal Inch, 103 mm OAL, Micrograin Carbide, H-Coated

Stellar Industrial | YG-1 DGR495096 High Feed Metric Long Length Dream Drill With Through Coolant, 9.6 mm Drill - Metric, 0.3779 in Drill - Decimal Inch, 103 mm OAL, Micrograin Carbide, H-Coated

Stellar Industrial | YG-1 DH424021L DH424 General Purpose Metric Long Length Dream Drill, 9.3472 mm Drill - Metric, 0.368 in Drill - Decimal Inch, 103 mm OAL, Micrograin Carbide, TiAlN Coated

Stellar Industrial | YG-1 DH424099 General Purpose Metric Long Length Dream Drill, 9.9 mm Drill - Metric, 0.3897 in Drill - Decimal Inch, 103 mm OAL, Micrograin Carbide, TiAlN Coated

Stellar Industrial | YG-1 DH452100 DH452 INOX Long Length Metric Dream Drill With Through Coolant, 10 mm Drill - Metric, 0.3937 in Drill - Decimal Inch, 103 mm OAL, Micrograin Solid Carbide, TiAlN Coated

Straight major cutting edges and a special flute profile ensure a good chip evacuation. The robust cutter geometry ensures high-performance drilling with good process reliability. A wide range of applications in steel materials thanks to a combination of tough ultra-fine grain carbide and an extremely wear-resistant coating. Up to dia 1.9 with 4 facets- from dia 2 with relieved cone. Note: Flute length LC = L2 + 1.5 x DC. Standard: DIN 6537 Tolerance nominal dia : h7 Number of cutting edges Z: 2 Tolerance nominal dia : h7 recommended maximum drilling depth L2: 46.7 mm Overall length L: 103 mm Shank dia Ds: 10 mm Feed f in steel < 900N/mm2: 0.22 mm/rev.

Straight major cutting edges and a special flute profile ensure a good chip evacuation. The robust cutter geometry ensures high-performance drilling with good process reliability. A wide range of applications in steel materials thanks to a combination of tough ultra-fine grain carbide and an extremely wear-resistant coating. Up to dia 1.9 with 4 facets- from dia 2 with relieved cone. Note: Flute length LC = L2 + 1.5 x DC. Standard: DIN 6537 Tolerance nominal dia : h7 Number of cutting edges Z: 2 Tolerance nominal dia : h7 recommended maximum drilling depth L2: 46.8 mm Overall length L: 103 mm Shank dia Ds: 10 mm Feed f in steel < 900N/mm2: 0.22 mm/rev.

Straight major cutting edges and a special flute profile ensure a good chip evacuation. The robust cutter geometry ensures high-performance drilling with good process reliability. A wide range of applications in steel materials thanks to a combination of tough ultra-fine grain carbide and an extremely wear-resistant coating. Up to dia 1.9 with 4 facets- from dia 2 with relieved cone. Note: Flute length LC = L2 + 1.5 x DC. Standard: DIN 6537 Tolerance nominal dia : h7 Number of cutting edges Z: 2 Tolerance nominal dia : h7 recommended maximum drilling depth L2: 47.2 mm Overall length L: 103 mm Shank dia Ds: 10 mm Feed f in steel < 900N/mm2: 0.22 mm/rev.

Straight major cutting edges and a special flute profile ensure a good chip evacuation. The robust cutter geometry ensures high-performance drilling with good process reliability. A wide range of applications in steel materials thanks to a combination of tough ultra-fine grain carbide and an extremely wear-resistant coating. Up to dia 1.9 with 4 facets- from dia 2 with relieved cone. Note: Flute length LC = L2 + 1.5 x DC. Standard: DIN 6537 Tolerance nominal dia : h7 Number of cutting edges Z: 2 Tolerance nominal dia : h7 recommended maximum drilling depth L2: 47.4 mm Overall length L: 103 mm Shank dia Ds: 10 mm Feed f in steel < 900N/mm2: 0.22 mm/rev.

Straight major cutting edges and a special flute profile ensure a good chip evacuation. The robust cutter geometry ensures high-performance drilling with good process reliability. A wide range of applications in steel materials thanks to a combination of tough ultra-fine grain carbide and an extremely wear-resistant coating. Up to dia 1.9 with 4 facets- from dia 2 with relieved cone. Note: Flute length LC = L2 + 1.5 x DC. Standard: DIN 6537 Tolerance nominal dia : h7 Number of cutting edges Z: 2 Tolerance nominal dia : h7 recommended maximum drilling depth L2: 48.4 mm Overall length L: 103 mm Shank dia Ds: 10 mm Feed f in steel < 900N/mm2: 0.2 mm/rev.

Tool specially matched to drilling holes without through-coolant. Concave major cutting edges and a special flute profile ensure a good chip evacuation. The sturdy cutter geometry with special point geometry and 4 cutting edges ensures drilling with good process reliability. A wide range of applications in steel materials thanks to a combination of tough ultra-fine grain carbide and extremely wear-resistant and heat-resistant coating.Flute length LC = L2 + 1.5 x DC. Through-coolant: no Standard: DIN 6537 Tolerance nominal dia : m7 Number of cutting edges Z: 2 Tolerance nominal dia : m7 recommended maximum drilling depth L2: 46.7 mm Overall length L: 103 mm Shank dia Ds: 10 mm Feed f in steel < 900N/mm2: 0.2 mm/rev.

Tool specially matched to drilling holes without through-coolant. Concave major cutting edges and a special flute profile ensure a good chip evacuation. The sturdy cutter geometry with special point geometry and 4 cutting edges ensures drilling with good process reliability. A wide range of applications in steel materials thanks to a combination of tough ultra-fine grain carbide and extremely wear-resistant and heat-resistant coating.Flute length LC = L2 + 1.5 x DC. Through-coolant: no Standard: DIN 6537 Tolerance nominal dia : m7 Number of cutting edges Z: 2 Tolerance nominal dia : m7 recommended maximum drilling depth L2: 47.8 mm Overall length L: 103 mm Shank dia Ds: 10 mm Feed f in steel < 900N/mm2: 0.2 mm/rev.