Bobrick® 1-1/2" Dia. Two-Wall Tub/Shower/Toilet Compart. Grab Bar - 36"W S - B68137

About the Bobrick B68137 Stainless Steel 18 Gauge TwoWall Grab Bar with Concealed Mounting and Snap Flange The Bobrick B68137 Stainless Steel 18 Gauge TwoWall Grab Bar with Concealed Mounting and Snap Flange acts as a balancing support and a safety backup fixture to help prevent dangerous bathroom falls. Made of sturdy 18 gauge stainless steel tubing, the Bobrick B68137 Stainless Steel 18 Gauge TwoWall Grab Bar with Concealed Mounting and Snap Flange provides a secure handrail where you need it. The bar extends across two perpendicular walls for increased support in a single welded structural unit. The patented fixture can support upwards of 900 pounds when installed properly and when fixed to strong anchoring walls. The Bobrick B68137 Stainless Steel 18 Gauge TwoWall Grab Bar with Concealed Mounting and Snap Flange complies with ADA Accessibility Guidelines and is excellent for use in schools, businesses, commercial buildings, hotels, medical buildings, restaurants or more.Barrier Free Guidelines: Diameter of grab bars should be 11/4" to 11/2" (3238mm) with 11/2" (38mm) clearance from the wall, and should not rotate in their fittings. Required mounting height is universally 33" to 36" (840915mm) from the centerline of the grab bar to the finish floor. Structural strength of all grab bars and their mounting devices should withstand more than 250 pounds of force (1112 N). For all barrierfree toilet compartments, individual toilet rooms and guest bathrooms, it is recommended that a 36" (915mm) min. horizontal grab bar be installed on the back wall over the toilet and a 42" (1065mm) min. horizontal grab bar be installed on the side wall or partition nearest the toilet. This can also be accomplished with a single horizontal twowall grab bar.

Bobrick 1-1/2 Dia. Two-Wall Tub-Shower Toilet Compartment Grab Bar 36W Satin Finish Two-Wall Grab Bars help create extra support in restroom and bathing areas. Designed for use in showers, bathtubs, and toilet compartments, with two wall coverage. Grab Bar is constructed of 18-gauge, 1-1/2 stainless steel tubing with satin finish that complements any decor. Withstands more than 250lbs. of force when properly installed. Features a concealed, stainless steel mounting flange, with two screw holes for concealed anchors. Cover is constructed of 22-gauge stainless steel with satin finish, and snaps over mounting flange to conceal screws. Two-Wall Grab Bars meet ADA Accessibility Guidelines in the U.S.A. All joints and supports are contour cut and welded for durability. Dimensions: 36W. L TYPE; SATIN COLOR/FINISH; 18 GAUGE MATERIAL THICKNESS; RESTROOM, 2-WALL TUB/SHOWER TOILET COMPARTMENT APPLICATION; 1-1/2 INCH DIAMETER; MOUNTING FLANGE, 304 STAINLESS STEEL PLATE, SCREW HOLE, SNAP FLANGE COVER INCLUSIONS/FEATURES; 304 STAINLESS STEEL GRAB BAR MATERIAL; 304 STAINLESS STEEL FLANGE MATERIAL; CONCEALED FLANGE MOUNTING TYPE; FLANGE DIAMETER 3 INCH; FLANGE THICKNESS 1/8 INCH; OVERALL DIMENSIONS 36 INCH DEPTH; WALL AND GRAB BAR CLEARANCE 1-1/2 INCH; OPTIONAL ACCESSORIES CONCEALED ANCHORS, FASTENERS, VANDAL RESISTANT SCREWS