| Brand name, Manufacturer name, Manufacturer | Char-Lynn (Eaton) |
|---|
| Extra Product Name | Char-Lynn (Eaton) - 103-2015-010 - Motion Industries |
|---|
| moq, multiple, tierMinQty1 | 1 |
|---|
| MPN | LYNN (EATON) - 103-2015-010 |
|---|
| qtyInStock | Not in Stock, Available to Order |
|---|
| SKU | 00808106 |
|---|
| tierPrice1 | 788.28 |
|---|
| series: | S-Series |
|---|
| intermittent pressure: | 1800 psi |
|---|
| displacement: | 18.20 in |
|---|
| intermittent torque: | 4467 in-lbs |
|---|
| maximum rpm-continuous: | 190 rpm |
|---|
| replacement buna seal kit - sold separately: | 008 Design - 60533-000, 009 & 010 Design - 60539-000 |
|---|
| continuous torque: | 4345 in-lbs |
|---|
| replacement viton seal kit - sold separately: | 008 Design - 60534-000, 009 & 010 Design - 60546-000 |
|---|
| continuous pressure: | 1500 psi |
|---|
| replacement bearing race - sold separately: | 008, 009 & 010 Design - 7462-000 |
|---|
| continuous flow rate: | 15 gpm |
|---|
| replacement needle thrust bearing: | 008, 009 & 010 Design - 7537-000 |
|---|
| motor port type: | Straight Thread O-Ring SAE |
|---|
| replacement output shaft - sold separately: | 008, 009 & 010 Design - 7360-001 |
|---|
| motor port size: | 7/8 |
|---|
| replacement geroler - sold separately: | 010 Design - 8632-026 |
|---|
| shaft type: | Straight |
|---|
| replacement drive - sold separately: | 010 Design - 22253-000 |
|---|
| output shaft size: | 1 in Straight - Woodruff Key |
|---|
| replacement short cap screw (mounting end) - sold separately: | 008, 009 & 010 Design - 16292-088 - 4 Required |
|---|
| mounting type: | 4-Bolt Flange - 1.75 in Pilot |
|---|
| replacement long cap screw (cap end) - sold seprately: | 010 Design - 16294-275 - 7 Required |
|---|
| seal type: | Standard |
|---|
| replacement rear housing - sold separately: | 008, 009 & 010 Design - 8631-001 |
|---|
| case drain: | 7/16 |
|---|
| replacement mounting flange - sold separately: | 010 & 009 Design 22000-002, 008 Design 7464-000 |
|---|
| inlet and outlet port size: | Straight Thread O-ring SAE 7/8-14 UNF-2B Ports Size 10 |
|---|
| repair parts drawing#: | 6-125 |
|---|
| actual port type: | .875-14 Unf-2B O-ring Port, Size 10 Accepts Fittings For Sae J1926 |
|---|
| actual output shaft: | 25.4 [1.00] Dia. Straight With Woodruff Key And 1/4-20 Threaded Hole |
|---|
| actual mounting flange: | 4 Bolt Std: 44.4 [1.75] Dia. X 3.0 [.12] Pilot, .375-16 Mounting |
|---|
| maximum operating temperature: | 180 |
|---|
| intermittent flow rate: | 20 gpm |
|---|
