CO1 Large Diaphragm Studio Condenser Microphone

The Samson C01 Microphone has all the performance features that you demand from a medium diaphragm studio condenser microphone. It's the perfect solution for recording vocals, acoustic instruments and for use as an overhead drum mic. Featuring a medium, dual-layer 19mm diaphragm with a cardioid pickup pattern, the C01 produces a smooth flat frequency response. Its two ultra-thin sensor membranes pick up far more detailed sounds than any dynamic coil. The result is a mic that captures accurate, detailed and smooth audio with warm bass tones and extended top end. You'll hear the strings and wood of your guitar, the breath and resonance of a singer or the brassy shimmer of a ride cymbal with crystal clear clarity. The C01's design includes a heavy gauge mesh grill, gold-plated XLR connecter and an LED for monitoring its 48 V of phantom power. It also comes with a swivel mount that can be attached to any standard mic stand. In addition, an optional SP01 spider shock mount is available for increased mic and sound stability. Samson's C01 is one of the best values available from a professional recording microphone. In the Box: Samson C01 Large Diaphragm Condenser Microphone Swivel Stand Mount Carry Case Limited 1-Year Warranty Our Kit Includes: Samson C01 Large Diaphragm Condenser Microphone Samson Desktop Mic Stand / Metal Pop Filter Bundle MDPS05 Mic Cable XLR-M to XLR-F 20 ft

- Samson C01 Large-Diaphragm Cardioid Condenser Microphone with 20Hz-18kHz Frequency Response, and a 136 dB Max SPL- The Samson C01 Large-Diaphragm Cardioid Condenser Microphone produces a flat frequency that is best suited for vocal recordings - On-Stage 20' Microphone Cable features heavy duty rubber outer jacket, wire gauge 24awg, and metal XLR connectors- Samson MBA28 Microphone Boom Arm with durable steel construction, 28 max reach, internal springs for silent and effortless positioning, and 5/8 -27 mic clip threading- Ideal for podcasters, gamers, YouTube personalities, and more Included Components: (1) Samson C01 Large-Diaphragm Condenser Microphone:(1) On-Stage 20' Microphone Cable(1) Samson MBA28 Microphone Boom Arm, 28 About the Samson C01 Large-Diaphragm Condenser Microphone: Samson's C01 has all the performance features that you demand from a large-diaphragm condenser microphone. It's the perfect solution for recording vocals, acoustic instruments, and for use as and overhead drum mic. Featuring a large, dual-layer 19 mm diaphragm with a cardioid pickup pattern, the C01 produces a smooth flat frequency response. Its two ultra-thin sensor membranes pick up far more detailed sounds than any dynamic coil. The result is a mic that captures accurate, detailed, and smooth audio with warm bass tones and extended top end. You'll hear the strings and wood of your guitar, the breath and resonance of a singer, or the brassy shimmer of a ride cymbal with crystal clear clarity. The C01's design includes a heavy gauge mesh grill, gold-plated XLR connecter, and an LED for monitoring its +48v of phantom power. It also comes with a swivel mount that can be attached to any standard mic stand. In addition, an optional SP01 Spider Shockmount is available for increased mic and sound stability. Samson's C01 is one of the best values available from a professional recording microphone.

Samson C01 Condenser Microphone The versatile Samson C01 Microphone accurately reproduces vocals, acoustic instruments, and overhead drums. Its large, 19mm diaphragm provides an extended frequency and fast transient response for accurate audio reproduction. You can comfortably record music in the studio without worrying about unwanted ambient sounds. The hyper-cardioid polar rejects off-axis sound pick up. If you position C01 correctly, the microphone will only pick up the sounds you want. TECHNICAL SPECS: Mic Type: Back Condenser Element Required Phantom Power: +48V | Phantom Power Voltage: 36-52V Diaphragm: 19mm Capsule with 3-Micron (Thickness) Diaphragm Polar Pattern: Hyper-cardioid Frequency Response: 40~18,000Hz Sensitivity: -33dB/Pa SPL: 136dB Impedance: 200 Ohm Dimensions (DxWxH): 2.13 x 2.13 x 7" Weight: 2 lb Accessories: Swivel Stand Mount, Carry Case Also Comes With: Blucoil Boom Arm Plus Pop Filter The 30" long Blucoil Boom Arm Pop Filter accommodates all kinds of microphones and shock mounts (3/8" to 5/8" threading adapter and microphone clip are included). It is made of heavy-duty steel and zinc alloyed parts. You can adjust the boom mic 360-degrees. The foldable boom arm comes with a removable Blucoil Pop Filter. The 2-layer mesh blocks the air blasted from the user's mouth and disperses any remaining air pressure. It effectively reduces hisses and environmental noise caused by plosive sounds. NOTE: Install the boom arm vertically for it to hold up the weight of a 3.3 lb microphone. Blucoil 10-FT Balanced XLR Cable The 10-foot Blucoil cable interconnects your microphone to an audio interface, mixer, or preamp. It is made with premium Male-to-Female Neutrik-equivalent Zinc Alloy connectors that are protected with a high-density PVC jacket. The 92% shielding protects your audio signal from EMI and RFI.

Samson C01 Condenser Microphone The versatile Samson C01 Microphone accurately reproduces vocals, acoustic instruments, and overhead drums. Its large, 19mm diaphragm provides an extended frequency and fast transient response for accurate audio reproduction. You can comfortably record music in the studio without worrying about unwanted ambient sounds. The hyper-cardioid polar rejects off-axis sound pick up. If you position C01 correctly, the microphone will only pick up the sounds you want. TECHNICAL SPECS: Mic Type: Back Condenser Element Required Phantom Power: +48V | Phantom Power Voltage: 36-52V Diaphragm: 19mm Capsule with 3-Micron Diaphragm Polar Pattern: Hyper-cardioid Frequency Response: 40~18,000Hz Diaphragm Thickness: 3 microns Sensitivity: -33dB/Pa SPL: 136dB Impedance: 200 Ohm Dimensions (DxWxH): 2.13 x 2.13 x 7" Weight: 2 lb Accessories: Swivel Stand Mount, Carry Case Also Comes With: Blucoil Pop Filter Windscreen The premium Blucoil Microphone Pop Filter Windscreen features a 2-layer mesh with a 6-inch diameter. It blocks the air blasted from the user's mouth and disperses any remaining air pressure. Its unique design lessens the energy of plosive sounds caused by hard consonants such as 'p', 'b', and 'g'. So, by the time your recorder has captured your vocals, there are no hisses or popping sounds. Blucoil 10-FT Balanced XLR Cable The 10-foot Blucoil cable interconnects your microphone to an audio interface, mixer, or preamp. It is made with premium Male-to-Female Neutrik-equivalent Zinc Alloy connectors that are protected with a high-density PVC jacket. The 92% shielding protects your audio signal from EMI and RFI. Get the C01 Bundle today and receive 5-Pack of Blucoil Reusable Velcro Cable Ties!

Samson C01 Condenser Microphone The versatile Samson C01 Microphone accurately reproduces vocals, acoustic instruments, and overhead drums. Its large, 19mm diaphragm provides an extended frequency and fast transient response for accurate audio reproduction. You can comfortably record music in the studio without worrying about unwanted ambient sounds. The hyper-cardioid polar rejects off-axis sound pick up. If you position C01 correctly, the microphone will only pick up the sounds you want. *NOTE: This condenser mic requires +48V phantom power to operate. TECHNICAL SPECS: Element: Back Condenser Required Phantom Power: +48V | Phantom Power Voltage: 36-52V Diaphragm: 19mm Capsule with 3-Micron (Thickness) Diaphragm Polar Pattern: Hypercardioid Frequency Response: 40Hz-18kHz SPL: 136dB Sensitivity: -33dB/Pa Impedance: 200 Ohm Size (DxWxH): 2.13 x 2.13 x 7" Weight: 2 lb Accessories: Swivel Stand Mount; Carry Case Also Comes With: Blucoil Boom Arm Plus Pop Filter The 30" long Blucoil Boom Arm accommodates all kinds of microphones and shock mounts (3/8"-5/8" threading adapter and mic clip are included). It is made of heavy-duty steel, zinc alloyed parts, and can be fully rotated 360-degrees. The foldable boom arm includes a removable Blucoil Pop Filter that reduces hisses and p-popping. *NOTE: Install the boom arm vertically for it to hold up the weight of a 3.3 LB microphone. Samson SR350 Closed-Back Stereo Headphones The over-ear Samson SR350 Headphones feature 35mm drivers, which produces outstanding bass and 110dB sensitivity. It delivers 32 Ohm impedance and excellent noise isolation. You can use SR350 for monitoring audio recordings or casual listening thanks to its wide 20Hz-20kHz frequency range. Get the C01 Bundle today and receive these Blucoil exclusives: 4-Pack of 12" Acoustic Foam Isolation Panel Wedges 10-FT Balanced XLR Cable

Samson C01 Condenser Microphone The versatile Samson C01 Microphone accurately reproduces vocals, acoustic instruments, and overhead drums. Its large, 19mm diaphragm provides an extended frequency and fast transient response for accurate audio reproduction. You can comfortably record music in the studio without worrying about unwanted ambient sounds. The hyper-cardioid polar rejects off-axis sound pick up. If you position C01 correctly, the microphone will only pick up the sounds you want. *NOTE: This condenser mic requires +48V phantom power to operate. TECHNICAL SPECS: Type: Back Condenser | Capsule Size: 19mm | Diaphragm: 3-Micron (Thickness) Required Phantom Power: +48V | Phantom Power Voltage: 36-52V Polar Pattern: Hypercardioid Freq Response: 40Hz - 18kHz Max SPL: 136dB Sensitivity: -33dB/Pa Impedance: 200 Ohm Size (DxWxH): 2.13 x 2.13 x 7" Weight: 2 lb Accessories: Swivel Stand Mount; Carry Case Also Comes With: Blucoil 20-FT Balanced XLR Cable The 20-foot Blucoil cable interconnects your microphone to an audio interface, mixer, or preamp. It is made with premium Male-to-Female Neutrik-equivalent Zinc Alloy connectors that are protected with a high-density PVC jacket. The 92% shielding protects your audio signal from EMI/RFI. Blucoil Adjustable Microphone Tripod Stand The Blucoil Adjustable Microphone Stand features 2.3' to 4.76' height, and 12" long tripod legs. It includes a 2.13' boom arm and 2 mic clips with 3/8" threading. The mic clips have a 2" opening. You also get a 3/8" to 5/8" threading adapter and two cable organizers. The stand can handle up to 11 lb load while the boom arm offers 4.41 lb max weight capacity. Get this bundle today and receive a Blucoil Microphone Pop Filter Windscreen plus 4-Pack of 12-inch Acoustic Foam Isolation Panel Wedges with Adhesive Tapes!

Cardioid pickup pattern Large, dual-layer 19mm diaphragm Heavy-gauge mesh grill Gold-plated XLR connector LED indicates 48V phantom power Smooth, flat frequency response Swivel stand mount Optional SP01 spider shockmount