Belden Star-Quad Audio Cable XLR Female to 1/4-TRS Balanced 3 Foot - Black

Belden microphone cable is used for connecting low level microphones or musical instruments. Key properties of microphone (MIC) cable are ruggedness, flexibility, flex life and interference immunity.Cable construction utilizes a 4 conductor configuration. Quad MIC cables are connected by attaching the two white conductors to one pin and two blue conductors to the other pin in a balanced-line XLR type connector. Besides the common-mode rejection of a standard balanced line, this gives common-mode rejection at each pin, greatly reducing noise and interference.All Belden microphone cables utilize only HIGH CONDUCTIVITY copper produced by a process called ELECTROLYTIC TOUGH PITCH. This refining process produces a copper conductor that is 99.95% pure copper resulting in HIGH CONDUCTIVITY per ASTM B115. The high purity obtained from ETP copper results in microphone cable performance that is comparable to that of oxygen free copper cables.Features:StarQuad (4 conductor)Improved noise & hum rejection6 colorsLow-Impedance CableUltimate performanceEfficient technologyOptimal transmissionSpecifications:Conductors: 4Conductor AWG: 24Conductor Stranding: 42x40Conductor Material: SBC - Soft Bare CopperConductor Dia. (in.): 0.024Insulation Material: PE - PolyethyleneInsulation Material Wall Thickness (in.): 0.016Insulation Material Dia. (in.): 0.056Outer Shield Type: BraidOuter Shield Material: TC - Tinned CopperOuter Shield Coverage (%): 95Outer Jacket Material: PVC - Polyvinyl ChlorideOuter Jacket Nom. Wall Thickness (in.): 0.045Max. Recommended Pulling Tension: 21 lbs.Min. Bend Radius (Install)/Minor Axis: 2.450 in.Nom. Characteristic Impedance (Ohm): 40Nom. Inductance (µH/ft): 0.21Nom. Capacitance Conductor to Conductor (pF/ft): 39.2Nom. Cap. Between Cond. in a Quad Config. (pF/ft): 57.4Nominal Velocity of Propagation (%): 66Nom. Conductor DC Resistance:Max. Operating Voltage - UL: 100 V RMS