Caig Laboratories Contact Cleaner, Spray, 57G - G100S-2

DeoxIT GOLD G100 Spray (NSN-6850-01-435-6477) 100 percent solution. DeoxIT GOLD G100 Spray (formerly ProGold), 100 percent solution, 57 g, no solvents, metered one-shot valve dispenses 100 percent ProGold, (Applications = 500 +/-) (NSN 6850-01-435-6477) DeoxIT Gold G-Series - Contact Enhancer, Conditioner & Protector (formerly ProGold) DeoxIT Gold (formerly ProGold), is a unique conditioning solution that improves conductivity and provides long-lasting protection on gold, base metals and other precious metal contacts and connections (gold, silver, rhodium, copper, bronze, nickel, etc.). Use on plated connectors, contacts and metal surfaces for maximum performance and protection. Recommended for critical applications where only slight cleaning action is necessary. If the surface looks clean, applying DeoxIT D-Series contact cleaner first is usually not necessary. DeoxIT Gold is designed to dissolve small amounts of oxidation. Apply DeoxIT Gold after DeoxIT D-Series contact cleaner on plated metal surfaces, except where noted with DeoxIT Shield S-Series below. The more critical the connection or part, especially low current applications, DeoxIT Gold should be the final step. For reference, DeoxIT Gold has approximately 0.5 percent cleaning action. KEY FEATURES: Improves Conductivity Maintains Optimum Signal Quality Protects Base Metals from Oxidation Prevents Dendrite and Fretting Corrosion Forms Protective Anti-Tarnishing Layer Reduces Arcing, RFI and Intermittent Connections Reduces Wear and Abrasion Temperature Range, -45 C to +240 C DeoxIT D-Series - Contact Cleaner & Rejuvenator - Brings Old Systems Back to Life! DeoxIT Gold G-Series (formerly ProGold) - Contact Conditioner & Protector - Maximizes New System Performance! DeoxIT Shield S-Series (formerly PreservIT) - Contact Protector - Maintains New System Performance in Severe Environments! Maintains Optimum Signal Quality Protects Base Metals from Oxidation Prevents Dendrite and Fretting Corrosion Forms Protect

DeoxIT Gold G-Series is specifically formulated to improve conductivity and provide long lasting protection on gold, precious metals and their base metals. It conditions connectors, contacts, and other metal surfaces, thus enhancing the conductivity characteristics to efficiently transmit electrical signals. DeoxIT Gold G-Series outperforms all other contact cleaners, enhancers and lubricants. Due to its unique properties, it deoxidizes and cleans surface contamination, penetrates plated surfaces and molecularly bonds to the base metals. It improves conductivity for greater definition and dynamics, reduces noise and interference, and lowers distortion. Unlike other products, it also stabilizes connections between similar and dissimilar metals. It provides long lasting protection on gold, silver, rhodium, copper, nickel and other precious metals. Physical and chemical changes in the surface condition of electronic connectors are primary causes of degraded performance of components and equipment. When contact surfaces are exposed contaminants in the atmosphere, nonmetallic films form, inhibiting conductivity. Added resistance and friction between metal surfaces can also cause abrasion, noise, freeze-up, and in some cases, increased power consumption. A common problem with plated surfaces, especially gold, is the ""whiskering"" (dendrite corrosion) of base metals to the surface due to golds soft and porous nature. Once exposed, base metals oxidize causing a ""blistering"" of the surfaces, adding unwanted resistance that impedes electrical performance. The contact surfaces are actually separated by this blister, thereby reducing the effective contact area. DeoxIT Gold G-Series coats the entire contact surface, providing superior protection from abrasion (insertion resistance), dendrite corrosion, arcing, RFI, wear, and atmospheric contamination. DeoxIT Gold will significantly increase the performance and reliability of all electronic components and equipment.