Dixon N4S4-B-LS Dix-Lock? N-Series Interchange Male End x Hose Barb Safety-Lock Plug | MROSupply.com

'Quick Coupler Plug, Bowes Interchange Type - Quick Connect Air Couplings, Hose Barb Hose Connection - Quick Connect Air Couplings, Body Size - Quick Connect Air Couplings 1/2 In., Barb Size - Quick Connect Air Couplings 1/2 In., Max. Pressure - Quick Connect Air Couplings 300 psi, Locking Type - Quick Connect Air Couplings Sleeve, Brass, Buna-N Seals - Quick Connect Air Couplings, Max. Flow 204 cfm, Trivalent Chrome Finish, Temp. Range -40 Degrees to 250 Degrees F'

N4S4-B-LS , Dix-Lock™ N-Series Interchange Male End x Hose Barb Safety-Lock Plug Specifications Rated pressure for connected Brass Coupler & Brass Plug: 300 PSI (20 Bar) Maximum Working and 8,200 PSI (865 Bar) Burst Conforms to MIL-C-3486 and A-A-50431A standards Construction Machined components are manufactured using solid bar stock. Stainless steel retaining ring and spring maximize corrosion resistance and extend service life. Steel componentry is plated using ROHS Compliant Trivalent Chrome. Coupling sleeve constructed of cast zinc steel Aluminum lock ring Compatibility & Interchange Data Bowes Interchange Bayonet Style Interchangeable with Bowes 51000-Series, National Series 'B', MacDonald Quick-Action, Campbell Single-Lock Safety Notes Operating pressure for couplings utilizing hose barb connections may be dramatically reduced to that of the hose rating and/or hose end connection combination. Consult hose manufacturer's catalog for hose end connection ratings. If in doubt, test under controlled conditions for suitability to application. Dixon cannot assume liability for misapplication of production resulting in equipment down-time, lost production, and/or personal injury including death. It is important to be safe when installing quick disconnect couplings into a pneumatic circuit. Never install a pneumatic coupling directly into an air tool, use a piece of hose that is at least 18" long, between the tool and the coupling, to prevent damage to the coupling. To protect the operator, safety devices, such as a safety check valve and safety cable should be installed in case there is a hose or coupling failure.