| Brand name, Manufacturer name, Manufacturer | Char-Lynn (Eaton) |
|---|
| Extra Product Name | Char-Lynn (Eaton) - 101-1079-009 - Motion Industries |
|---|
| moq, multiple, tierMinQty1 | 1 |
|---|
| MPN | LYNN (EATON) - 101-1079-009 |
|---|
| qtyInStock | Not in Stock, Available to Order |
|---|
| SKU | 00774947 |
|---|
| tierPrice1 | 604.27 |
|---|
| series: | H-Series |
|---|
| intermittent pressure: | 1800 psi |
|---|
| displacement: | 17.90 in |
|---|
| intermittent torque: | 4121 in-lbs |
|---|
| maximum rpm-continuous: | 192 rpm |
|---|
| replacement buna seal kit - sold separately: | 007 Design - 60023-000, 008 & 009 Design - 60540-000 |
|---|
| continuous torque: | 3110 in-lbs |
|---|
| replacement viton seal kit - sold separately: | 007 Design - 60032-000, 008 & 009 Design - 60544-000 |
|---|
| continuous pressure: | 1350 psi |
|---|
| replacement bearing race - sold separately: | 007, 008 & 009 Design - 7462-000 |
|---|
| continuous flow rate: | 15 gpm |
|---|
| replacement needle thrust bearing: | 007, 008 & 009 Design - 7537-000 |
|---|
| motor port type: | National Pipe Tapered Fuel |
|---|
| replacement output shaft - sold separately: | 007, 008 & 009 Design - 7360-002 |
|---|
| motor port size: | 1/2 |
|---|
| replacement gerotor - sold seprately: | 009 Design - 8277-026 |
|---|
| shaft type: | Splined |
|---|
| replacement drive - sold separately: | 009 Design - 22253-000 |
|---|
| output shaft size: | 1 in SAE - 6B Spline |
|---|
| replacement short cap screw (mounting end) - sold separately: | 007, 008 & 009 Design - 16292-088 - 4 Required |
|---|
| mounting type: | 2-Bolt Flange - 3.25 in Pilot |
|---|
| replacement long cap screw (cap end) - sold seprately: | 009 Design - 16294-288 - 7 Required |
|---|
| seal type: | Standard |
|---|
| replacement rear housing - sold separately: | 009 Design - 22230-002, 008 & 007 Design - 7359-002 |
|---|
| case drain: | No Case Drain |
|---|
| replacement mounting flange - sold separately: | 009 & 008 Design 22000-001, 007 Design 7463-000 |
|---|
| inlet and outlet port size: | 1/2-14 NPTF Ports Size 8MP |
|---|
| weight: | 14.0 lbs |
|---|
| actual port type: | .500-14 Nptf Dryseal Pipe thread Accepts Dryseal Fittings Per Sae J476A |
|---|
| actual output shaft: | 25.4 [1.00] Sae 6B Spline With 1/4-20 Threaded Hole |
|---|
| recommended filtration: | Per Iso Cleanliness Code. Level 18/13 |
|---|
| actual mounting flange: | 2 Bolt Std: 82.6 [3.25] Dia. X 3.0 [.12] Pilot, 13.59 [.535] Dia. Mounting |
|---|
| repair manual#: | 7-117 |
|---|
| maximum operating temperature: | 180 |
|---|
| repair parts drawing#: | 6-121 |
|---|
| overall height: | 133.9 mm |
|---|
| overall length: | 166.2 mm |
|---|
| overall width: | 98.3 mm |
|---|
| intermittent flow rate: | 20 gpm |
|---|
