Markel Y3472A1 Electric Ceiling Heater
Attributes
| Brand name, Manufacturer name | MARKEL |
|---|---|
| Manufacturer | MARKEL Markel |
| KnownMan, Extra Product Name | Markel Y3472A1 Electric Ceiling Heater |
| moq, multiple, tierMinQty1 | 1 |
| MPN, Mpns, PartNumber, Part_number, StrippedMpns | Y3472A1 |
| qtyInStock | 0 |
| tierPrice1 | 1299.39 |
| AdultProduct, Autographed, Memorabilia, TradeInEligible | False |
| Asin | B00KNT2M1I |
| Brand | Markel |
| ClassificationId | 495346 |
| DisplayName | HVAC |
| Height, Width | 260 75 |
| ItemClassification | BASE_PRODUCT |
| ItemName, Item_name | Markel Y3472A1 Surface Mounted Ceiling Heater, 2KW, 480V 3PH 2.4A |
| Item_type_keyword | tools-products |
| Keyword | 3472 |
| Link | https://m.media-amazon.com/images/I/31D9rHNYKsL._SL75_.jpg https://m.media-amazon.com/images/I/31D9rHNYKsL.jpg |
| ProductType | TOOLS |
| Product_description | Product SpecificationsContractor shall supply and install heavy duty ceiling mounted forced air electric heater(s) of the wattage, voltage and phase as indicated on the plans. The heater shall so be designed to provide an even distribution of heated air to the space to be heated by drawing return air in the periphery of the heater, across and through the element and be discharged from the center section of the heater by mean of an electric motor and axial flow fan blade.Motor: Motor shall be permanent lubricated, unit bearing, totally enclosed shaded pole type with impedance protection. Motors shall operate at no more than 1300 RPM and shall be same voltage as the heater.Performance: Heaters shall have a rating of 425 CFM at 710 F.P.M. Element: Element assemblies shall consist of two or three corrosion resistant steel sheathed type elements mechanically bonded to common corrosion resistant steel fins. Each sheathed element shall consist of helically coiled Nickel Chromium alloy resistant wire completely embedded in and surrounded by Magnesium Oxide, enclosed and wedged into corrosion resistant steel sheaths. Elements shall have 2" cold conductor pins extending into sheath and shall have a density of no more than 60 watts per inch.Thermal Overload: Heaters shall be equipped with a "manual reset" thermal overload which disconnects elements and motor in the event normal operating temperatures are exceeded. For safety, if opened due to abnormal temperature, thermal overload shall remain open until manually reset. Automatic reset thermal overloads which allow the element to continue to cycle under abnormal conditions will not be accepted.Approval: Heaters shall be ETL listed.Commercial and Institutional Applications: Use in - vestibules, entranceways, lobbies, rest rooms and small office and guard building applications. NotesOptional controls must be factory installed. Field installation is not acceptable and violates Listing and factory warra |
| Product_site_launch_date | 2014-05-30T10:10:11.331Z |
| Variant | MAIN |
| WebsiteDisplayGroup | home_improvement_display_on_website |
| WebsiteDisplayGroupName | Home Improvement |
Distributor offers
| Seller | SKU | MOQ | In stock | Multiple | Prices |
|---|---|---|---|---|---|
| h-mac.com | MARKEL-Y3472A1 | 1 | 1 | 1 @ $1299.39 |
Related on Amazon
As an Amazon Associate, we earn from qualifying purchases. (paid link) CERTAIN CONTENT THAT APPEARS ON THIS SITE COMES FROM AMAZON. THIS CONTENT IS PROVIDED 'AS IS' AND IS SUBJECT TO CHANGE OR REMOVAL AT ANY TIME.
Markel Y3472A1 Surface Mounted Ceiling Heater, 2KW, 480V 3PH 2.4A
Brand: Markel
Product SpecificationsContractor shall supply and install heavy duty ceiling mounted forced air electric heater(s) of the wattage, voltage and phase as indicated on the plans. The heater shall so be designed to provide an even distribution of heated air to the space to be heated by drawing return air in the periphery of the heater, across and through the element and be discharged from the center section of the heater by mean of an electric motor and axial flow fan blade.Motor: Motor shall be permanent lubricated, unit bearing, totally enclosed shaded pole type with impedance protection. Motors shall operate at no more than 1300 RPM and shall be same voltage as the heater.Performance: Heaters shall have a rating of 425 CFM at 710 F.P.M. Element: Element assemblies shall consist of two or three corrosion resistant steel sheathed type elements mechanically bonded to common corrosion resistant steel fins. Each sheathed element shall consist of helically coiled Nickel Chromium alloy resistant wire completely embedded in and surrounded by Magnesium Oxide, enclosed and wedged into corrosion resistant steel sheaths. Elements shall have 2" cold conductor pins extending into sheath and shall have a density of no more than 60 watts per inch.Thermal Overload: Heaters shall be equipped with a "manual reset" thermal overload which disconnects elements and motor in the event normal operating temperatures are exceeded. For safety, if opened due to abnormal temperature, thermal overload shall remain open until manually reset. Automatic reset thermal overloads which allow the element to continue to cycle under abnormal conditions will not be accepted.Approval: Heaters shall be ETL listed.Commercial and Institutional Applications: Use in - vestibules, entranceways, lobbies, rest rooms and small office and guard building applications. NotesOptional controls must be factory installed. Field installation is not acceptable and violates Listing and factory warra