Rite Taste RTR514A (3-Pack) Product SpecificationFlow rate5 GPMTemperature330 F to 1000 FPressure20 to 120 PSI Capacity300 GallonsCompatibilityReplaces The Following Filter Models :4392857439651082126524396508PEDR5RXD1 EDR5RXD2EDR5RXD3Filter 5LCV400VNLC240VPURPUR EDR5RXD1PUR EDR5RXD2PUR EDR5RXD3PUR Filter 5How To Install My FilterInitial Installation 1Locate the existing filter. It will be located behind the light cover above the top shelf on the right hand side. Remove the top shelf. This will give you more room to remove and install the new filter.2Remove the light cover by pressing the release clip on the bottom of the cover and pulling the cover out and up to remove the light cover. 3Remove the existing filter by turning it counter-clockwise as shown in the graphic.4Holding the new filter in your hands, carefully remove the packaging and sanitary end-cap from the new filter. Check the two black O-rings on the top of the filter to make sure that they are both there, and that they are not damaged.(Torn or Cracked). 5Locate the Start arrow found at the top of the instruction label on the back side of the filter. Align the Start arrow with the arrow on the refrigerator filter head.6Apply slight upward pressure and rotate the filter clockwise until the Stop arrow on the front of the filter label is aligned with the arrow on the refrigerator filter head. Ensure filter is fully install

Rite Taste RTR514A (3-Pack) Product SpecificationFlow rate5 GPMTemperature330 F to 1000 FPressure20 to 120 PSI Capacity300 GallonsCompatibilityReplaces The Following Filter Models :4392857439651082126524396508PEDR5RXD1 EDR5RXD2EDR5RXD3Filter 5LCV400VNLC240VPURPUR EDR5RXD1PUR EDR5RXD2PUR EDR5RXD3PUR Filter 5How To Install My FilterInitial Installation 1Locate the existing filter. It will be located behind the light cover above the top shelf on the right hand side. Remove the top shelf. This will give you more room to remove and install the new filter.2Remove the light cover