Markel G3424T Electric Wall Heater

- Powder coated bar stock steel tamper proof grille, with extruded Aluminum frame and 16 Gauge housing.- In-Built double pole tamper proof thermostat with a 40??-110??F temperature range & positive off; 3 phase heaters have 3 pole thermostat for positive off position.- Manual reset thermal limit switch.- Corrosion resistant steel tubular element with brazed steel fins.- Permanently lubricated, unit bearing, shaded pole motor with impedance protection.- Propeller type fan blade: 1400 RPM motor; 245 CFM Product SpecificationsContractor shall supply and install heavy duty wall mounted forced air electric heaters of the wattage, voltage and phase as specified. The heater shall so be designed to provide an even distribution of heated air to the space to be heated by drawing return air in the peripheral area of the heater across and through the element which shall then be discharged from the center section of the heater by means of an electric motor and axial flow fan blade. Heaters shall be recessed type to extend no more than 1-1/2" from the finished wall or surface mounted to extend no more than 5-3/4" from the finished wall or semi-recessed type to extend no more than 3-1/2" from finished wall or semi-recessed type to extend no more than 2-1/2" from finished wall.ENCLOSURE:Heater front shall withstand 10.8 ft. lbs. impact and 400 lbs. static force applied to an 8 sq. in. area at center grille location with less than 1/16" permanent distortion. The combination return and supply grille assembly shall be constructed of 1/16" x 3/8" rounded edge horizontal steel louvers which shall be spaced for maximum opening of 1/4". Louvers shall be welded at every intersection to three evenly spaced 1/16" diameter vertical members and completely framed in a heavy gauge natural anodized Aluminum extrusion. Front assembly shall be attached to the chassis by hidden tamper-resistant (Allen-head) machine screws. All other parts shall be 16 Gauge steel Zinc coa