This conductive saddle vent ventilation kit is for hazardous locations. The 10" in-line axial fan has been designed to be used as a stand alone fan or it can be attached in series to run long lengths of ventilation duct. Intake and exhaust flanges allow for either 8" or 10" duct to be attached to either end of the blower to achieve positive or negative ventilation. The blower is made of light weight steel and is available in explosion-proof electric. Features of SVF-10EXP: 1/3 HP, 115 VAC, 1-phase, 60 Hz explosion-proof electric motor. UL and CSA approved for class 1, Div. 1, groups C and D, class II, groups E, F, and G - built-in on/off switch. Automatic reset thermal overload. Dual grounding lugs installed on steel housing. Frame: All steel, powder coat red with rubber base feet. Inlet/Exhaust flange made of molded conductive polyethylene. Power cord: 10ft. power cord without plug, user wired per NEC. requirements. Measures: 16" length by 12.5" width by 16.75" height. Weight: 32 lbs. 72 dbA at 3ft. 1390cfm, free air delivery. 973cfm, 25ft duct, 1 - 90 degree bend. The kit includes SVF-10EXP fan and SV -CUPCND conductive saddle vent ventilation Kit

This conductive saddle vent ventilation kit is for hazardous locations. The 10" in-line axial fan has been designed to be used as a stand alone fan or it can be attached in series to run long lengths of ventilation duct. Intake and exhaust flanges allow for either 8" or 10" duct to be attached to either end of the blower to achieve positive or negative ventilation. The blower is made of light weight steel and is available in explosion-proof electric. Features of SVF-10EXP: 1/3 HP, 115 VAC, 1-phase, 60 Hz explosion-proof electric motor. UL and CSA approved for class 1, Div. 1, groups C and D, c