AC Gearmotor, Voltage 230VAC, Phase 1, Hz 50/60, Shaft Orientation Parallel, Nameplate RPM 63, Max. Torque 46 in.-lb., Overhung Load 90 lb., Input HP 1/20, Gear Ratio 25:1, Full Load Amps 0.3, Enclosure Open, Thermal Protection None, Max. Ambient Temp. 40 Degrees C, Rotation Reversible, Mounting All Position, Motor Type Permanent Split Capacitor, Capacitor Required Included, Length Less Shaft 8-1/4", Brake Adaptable to 5X400, Bearings Heavy Duty Needle on Case, Ball on Motor, Lubrication Permanent Heavy Duty Gear Oil, Gears 1st Stage Steel, Helical, Subsequent Stages Steel or Heat Treated Powdered Metal Spur, Gear Material Steel or Heat Treated Powdered Metal, Gear Type Helical First Stage/Spur, Seals Spring Loaded Lip Type on Input and Output Shaft, RPM Range 51 to 75WARNING: California ResidentsThis product can expose you to chemicals including Styrene, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.

AC Gearmotor, Voltage 230VAC, Phase 1, Hz 50/60, Shaft Orientation Parallel, Nameplate RPM 63, Max. Torque 46 in.-lb., Overhung Load 90 lb., Input HP 1/20, Gear Ratio 25:1, Full Load Amps 0.3, Enclosure Open, Thermal Protection None, Max. Ambient Temp. 40 Degrees C, Rotation Reversible, Mounting All Position, Motor Type Permanent Split Capacitor, Capacitor Required Included, Length Less Shaft 8-1/4", Brake Adaptable to 5X400, Bearings Heavy Duty Needle on Case, Ball on Motor, Lubrication Permanent Heavy Duty Gear Oil, Gears 1st Stage Steel, Helical, Subsequent Stages Steel or Heat Treated Powd