Toa Electronics . T-001T

TOA T-001T Dual Line Output Expansion Module with DSP, Designed For Use with the 9000 Series Amplifiers, Two Balanced Line Level Outputs, Maximum Three per Chassis The T-001T is a plug-in module designed for use with the 9000 Series amplifiers and can provide two independent balanced outputs. It can drive load of 600 Ω up to +16 dB. It can process effect for TONE/EQ/COMPRESSOR to two outputs independently. Key Features - Designed for use with the 9000 Series amplifiers - Two balanced line level outputs - Digital signal processing (10-Band Parametric EQ, Bass/ Treble, Loudness, High and Low Pass Filters, Compressor, TOA speaker EQ presets) - Maximum three per chassis Specifications - Power Source: +24V DC, -24V DC, +6V DC - Current Consumption: 35mA (at +24V DC), 35mA (at -24V DC), 60mA (at +6V DC) - Output: 2 channels, max. +20 dB (at 10 kΩ load), 600 Ω, electronically-balanced, - removable terminal block (3 pins) - Frequency Response: 20Hz - 20kHz, +1, -3dB - Total Harmonic Distortion + N: 0.005% (at 1kHz, 20Hz - 20kHz BPF, 5V output, 10 kΩ load) - S/N Ratio: Over 73dB (at 20Hz - 20kHz BPF) - Residual Noise: Under -91 dB (at 20Hz - 20kHz BPF, VOL: -70dB) - Cross Talk: Over 87dB (at 20kHz) - D/A Converter: 24 bit DAC - Sampling Frequency: 48kHz - Tone Control: Bass: ±12dB (at 100Hz) - Treble: ±12dB (at 10kHz) - Parametric Equalizer: 10 bands, Frequency: 20Hz - 20kHz, 31 points, Variable range: ±12dB, Q: 0.3 - 5 - Speaker Equalizer: 10 (setup software has 30 TOA speaker presets) - High-pass Filter: -12 dB/oct, Variable frequency range: 20Hz - 20kHz, 31 points - Low-pass Filter: -12 dB/oct, Variable frequency range: 20Hz - 20kHz, 31 points - Compressor: Depth: 1 - 5 - Delay: 0 - 40ms (1ms step), maximum 40ms (CH 1 + CH 2), mixer mode only - Operating Temperature: -10°C to +40°C - Dimensions: 35 x 78 x 91.5mm - Weight: 82 g