For 3/8" or 5/16" (10 or 8 mm) Glass Includes Clear Gaskets and Mounting Screws Made of Solid Brass No-Drill Fixed Panel Clamps Allow Securing of Fixed Panels of Glass, But Only Under Certain Circumstances Made of solid brass, and available in numerous stock finishes, these CRL No-Drill Fixed Panel Clamps provide an alternative to Clamps requiring drilled holes or notches in the glass. Two nylon tipped set screws are tightened to secure the glass. Mounting screws are also provided for the wall/ceiling/floor. Silicone must also be used for reinforcement along all glass edges where Clamps are used. IMPORTANT NOTE: Do not hinge a door off a fixed panel using these Clamps. Clamps must be used on minimum of three sides of fixed panel (top, bottom, and at least one side). Silicone must be used for reinforcement along the entire edge of the glass where Clamps are used. It is the responsibility of the installer to determine if adequate structural backing support is being used. SPECIFICATIONS: Material: Solid Brass Glass Thickness Range: NDC4: 5/16" to 3/8" (8 to 10 mm); NDC6: 1/4" (6 mm) No Glass Fabrication Required Includes: Mounting Screw and Clear Gaskets Color - Antique Brass Minimum Order - 1 Each Ship Via - Can Ship UPS Width - 2-3/8 in (60 mm) O.D. Height - 1-1/8 in (28 mm) O.D. Depth - 3/4 in (19 mm) Size - 2-3/8" (60 mm) Wide x 1-1/8" (28 mm) High Manufacturer - CR Laurence MSRP - 0.00 MfrPartNumber - NDC4ABR Brand - CR Laurence Vendor - CRLaurence

For 3/8" or 5/16" (10 or 8 mm) Glass Includes Clear Gaskets and Mounting Screws Made of Solid Brass No-Drill Fixed Panel Clamps Allow Securing of Fixed Panels of Glass, But Only Under Certain Circumstances Made of solid brass, and available in numerous stock finishes, these CRL No-Drill Fixed Panel Clamps provide an alternative to Clamps requiring drilled holes or notches in the glass. Two nylon tipped set screws are tightened to secure the glass. Mounting screws are also provided for the wall/ceiling/floor. Silicone must also