As an Amazon Associate, we earn from qualifying purchases.

DEV-13955 SparkFun Electronics | Development Boards, Kits, Programmers | DigiKey

Attributes

Brand name, Manufacturer name, Manufacturer, Mfr, Label, Publisher, StudioSparkFun Electronics
Extra Product NameDEV-13955 SparkFun Electronics | Development Boards, Kits, Programmers | DigiKey
atoms, moq, multiple, tierMinQty1, NumberOfItems, Number_of_items1
extraShipping0
MPN, Model, ModelNumber, Model_number, Mpns, PartNumber, Part_numberDEV-13955
qtyInStock266
SKU11570518
tierPrice115.95000
CategoryDevelopment Boards, Kits, Programmers
Series, Primary Attributes-
PackageBulk
Part StatusActive
TypeMemory ean upc
FunctionData Logger
EmbeddedYes, MCU, 8-Bit
Utilized IC / PartATmega328
Supplied ContentsBoard(s)
Secondary AttributesOn-Board LEDs
ASIN, AsinB0BHL56BP5
AdultProduct, Autographed, Batteries_included, Batteries_required, Memorabilia, TradeInEligibleFalse
Amount17.50
BindingUnknown Binding
BrandSparkFun
Bullet_pointAlso Features: Preprogrammed ATmega328 and bootloader. Four SPI pogo pins. Two LEDs indicate writing status. 2mA idle, 6mA at maximum recording rate. Pre-soldered Headers. For even better performance the OpenLog Artemis is the tool you need, featuring logging speeds up to 500000bps. NOTE: The SparkFun OpenLog with Headers does NOT come with OpenLog Artemis. OpenLog With Headers Features: VCC Input: 3.3V-12V (Recommended 3.3V-5V) Log to low-cost microSD FAT16/32 cards up to 32GB. Simple command interface. Configurable baud rates (up to 115200bps) The SparkFun OpenLog uses an ATmega328 running at 16MHz thanks to the onboard resonator. The OpenLog draws approximately 2-3mA in idle (nothing to record) mode. During a full record OpenLog can draw 10 to 20mA depending on the microSD card being used. The SparkFun OpenLog with Headers can store, or "log", huge amounts of serial data and act as a black box of sorts.
ClassificationId, ProductCategoryId17441247011
Currency, CurrencyCodeUSD
DisplayNameSingle Board Computers
Height0.3937 0.39370 0.6699999993166 10.0 10.1092 1594 1603 1839 2198 500 75
Identifier0845156010158 845156010158
IdentifierTypeEAN UPC
Included_componentsMicro SD
ItemClassificationBASE_PRODUCT
ItemName, Item_nameSparkFun OpenLog with Headers Open Source Data Logger ATmega328 VCC Input: 3.3V-12V Preprogrammed ATmega328 and bootloader
Item_package_weight0.018
Item_type_keywordsingle-board-computers
KeywordATM-2
Length1.7018 3.5433 3.54330 3.9799999959404 90.0
Linkhttps://m.media-amazon.com/images/I/413azRSxa3L._SL75_.jpg https://m.media-amazon.com/images/I/413azRSxa3L.jpg https://m.media-amazon.com/images/I/41uSST4TxXL._SL75_.jpg https://m.media-amazon.com/images/I/41uSST4TxXL.jpg https://m.media-amazon.com/images/I/41yw6235B8L._SL75_.jpg https://m.media-amazon.com/images/I/41yw6235B8L.jpg https://m.media-amazon.com/images/I/5142KFgJIoL._SL75_.jpg https://m.media-amazon.com/images/I/5142KFgJIoL.jpg https://m.media-amazon.com/images/I/6159x04jK+L.jpg https://m.media-amazon.com/images/I/61QPatq0fXL.jpg https://m.media-amazon.com/images/I/716+6UVgGtL.jpg https://m.media-amazon.com/images/I/71WTm6ibRNL.jpg https://www.amazon.com/gp/bestsellers/pc/17441247011
List_price17.5
ProductGroup, WebsiteDisplayGroupNameBISS Basic
ProductType, ProductTypeNameELECTRONIC_COMPONENT
Product_descriptionThe SparkFun OpenLog with Headers can store, or "log", huge amounts of serial data and act as a black box of sorts. The SparkFun OpenLog with Headers is an open source data logger that works over a simple serial connection and supports microSD cards up to 64GB. The OpenLog can store or "log" huge amounts of serial data and act as a black box of sorts to store all the serial data that your project generates, for scientific or debugging purposes. This version of th OpenLog even includes pre-soldered headers for your convenience. The SparkFun OpenLog uses an ATmega328 running at 16MHz thanks to the onboard resonator. The OpenLog draws approximately 2-3mA in idle (nothing to record) mode. During a full record OpenLog can draw 10 to 20mA depending on the microSD card being used.All data logged by the OpenLog is stored on the microSD card. Any 512MB to 32GB microSD card should work. OpenLog supports both FAT16 and FAT32 SD formats. For even better performance the OpenLog Artemis is the tool you need, featuring logging speeds up to 500000bps.
Product_site_launch_date2022-10-06T19:28:49.143Z
Rank5006 5302
Registration_statusnot_capable_emitting_rf_energy
StrippedMpnsDEV13955
Supplier_declared_dg_hz_regulationnot_applicable
TitleSingle Board Computers (Computers & Accessories) SparkFun OpenLog with Headers Open Source Data Logger ATmega328 VCC Input: 3.3V-12V Preprogrammed ATmega328 and bootloader
URLhttps://m.media-amazon.com/images/I/41yw6235B8L._SL75_.jpg
Unitcentimeters inches kilograms millimeters nanometer pounds
Unitsinches nanometer pixels pounds
VariantMAIN PT01 PT02 PT03
WebsiteDisplayGroupbiss_basic_display_on_website
Weight0.03968320716
Width1594 1603 1839 2.0899999978682 2198 5.3086 50 50.0 500 75

Distributor offers

SellerSKUMOQIn stockMultiplePrices
Digi-Key11570518126611 @ $15.95

Related on Amazon

As an Amazon Associate, we earn from qualifying purchases. (paid link) CERTAIN CONTENT THAT APPEARS ON THIS SITE COMES FROM AMAZON. THIS CONTENT IS PROVIDED 'AS IS' AND IS SUBJECT TO CHANGE OR REMOVAL AT ANY TIME.

SparkFun OpenLog with Headers Open Source Data Logger ATmega328 VCC Input: 3.3V-12V Preprogrammed ATmega328 and bootloader
Brand: SparkFun
The SparkFun OpenLog with Headers can store, or "log", huge amounts of serial data and act as a black box of sorts. The SparkFun OpenLog with Headers is an open source data logger that works over a simple serial connection and supports microSD cards up to 64GB. The OpenLog can store or "log" huge amounts of serial data and act as a black box of sorts to store all the serial data that your project generates, for scientific or debugging purposes. This version of th OpenLog even includes pre-soldered headers for your convenience. The SparkFun OpenLog uses an ATmega328 running at 16MHz thanks to the onboard resonator. The OpenLog draws approximately 2-3mA in idle (nothing to record) mode. During a full record OpenLog can draw 10 to 20mA depending on the microSD card being used.All data logged by the OpenLog is stored on the microSD card. Any 512MB to 32GB microSD card should work. OpenLog supports both FAT16 and FAT32 SD formats. For even better performance the OpenLog Artemis is the tool you need, featuring logging speeds up to 500000bps.
Details
  • The SparkFun OpenLog with Headers can store, or "log", huge amounts of serial data and act as a black box of sorts.
  • OpenLog With Headers Features: VCC Input: 3.3V-12V (Recommended 3.3V-5V) Log to low-cost microSD FAT16/32 cards up to 32GB. Simple command interface. Configurable baud rates (up to 115200bps)
  • Also Features: Preprogrammed ATmega328 and bootloader. Four SPI pogo pins. Two LEDs indicate writing status. 2mA idle, 6mA at maximum recording rate. Pre-soldered Headers.
  • The SparkFun OpenLog uses an ATmega328 running at 16MHz thanks to the onboard resonator. The OpenLog draws approximately 2-3mA in idle (nothing to record) mode. During a full record OpenLog can draw 10 to 20mA depending on the microSD card being used.
  • For even better performance the OpenLog Artemis is the tool you need, featuring logging speeds up to 500000bps. NOTE: The SparkFun OpenLog with Headers does NOT come with OpenLog Artemis.
Listing
BindingUnknown Binding
Product groupBISS Basic
Product typeELECTRONIC_COMPONENT
ModelDEV-13955
Part numberDEV-13955
Items per pack1
LabelSparkFun Electronics
ManufacturerSparkFun Electronics
View on Amazon (paid link)