U3016LFA REPAIR COUPL 3/4X3/4

Manufacturer no. – u3016lfa UPC – 6972854658933/4" Slip Coupling for copper repair only Cig 188 and ANSI/NSF-61 requirements certified to meet UPC IPC and cUPC for potable and heating hydronic water distribution This product contains less than 0.25% average Lead content on wetted bagged surfaces The sharkbite connection system uses an advanced push-fit design that works in two stages.When the tube is inserted into the fitting, in the first stage, passes it through a release collar and then through a stainless steel circlip.The Grab Ring has teeth that grip onto the tube.In the second phase the tube is pushed through an o-ring protector that aligns the tube.Then,the specially formulated o-ring is compressed between the wall of the lamp and the tube before the end of the tube stop reaches the tube.Only when the tube has passed through s of the o-ring stop and reached the tube, it is a joint insurance created. The sharkbite fittings are approved to be used with pipe/tube certified to the following specifications: PEX (ASTM f876 B, CSA b137.5) Copper (ASTM D 88) CPVC (ASTM 2846, CSA b137.6) The sharkbite connection system It uses an advanced lace design that works in two stages. When the tube is inserted into the assembly, in the first phase, it is passed through a launch collar and then through a stainless steel circlip. The grab ring has teeth that grip onto the tube. In the second phase the tube is pushed through an O-ring protector which aligns the tube. Then, the specially formulated O-ring is squeezed between the wall of the lamp and the tube before the end of the tube stop reaches the tube. Only when the tube has passed through the O-ring stop and reached the tube, is a Joint Lock created. The sharkbite fittings are approved to be used with tubing/tubing certified to the following specifications: PEX (ASTM F876 B, CSA B137.5) Copper (ASTM D 88) CPVC (ASTM 2846, CSA B137.6)