Markel H1H5503T Electric Unit Heater

The Washdown Series unit heaters are electric unit heaters constructed for use in areas that require washing or hosing of equipment due to dirty or dusty industrial environments in non-hazardous locations. The totally enclosed water-tight construction made with corrosion-resistant material make this series ideal for industrial heating applications. The Washdown Series is constructed with all built-in controls and safety temperature controls wired in a non-metallic Nema 4x control panel with single-point power connections.- Heavy-duty 304 16 Gauge stainless steel shroud.- 316 stainless construction available.- Nema 4x non-metallic control panel.- 24-Volt transformer and control panel.- 3-position switch (off-heat-fan).- Capillary thermostat with stainless steel sensor.- Automatic reset thermal cutout.- Totally enclosed U.L. listed motor.- Pilot light (power on indicator).- Stainless steel finned tubular element. Constructed of 304 or 316 stainless rod and fins.- Control panel on bottom of unit for ease of installation and service.- Disconnect switch with enclosure door interlock.- Front grill rotates to direct airflow.- Single-point power connection.- Fan Blade Epoxy coated Aluminum.- Meets all U.L., NEC, and OSHA requirements(when installed as directed).- Corrosion-resistant in high humidity and water-saturated areas.???ABS (American Bureau of Shipping) type approved. SPECIFICATIONSEnclosure and Motor:Element housing shall be 16 Gauge 304 or 316 stainless steel shroud. The outlet grill and louver assembly shall be 304/316 stainless steel and rotate for direction of discharge air. The heater shall have a 304/316 stainless steel inlet grill and fan guard. The motor shall be totally enclosed, permanently lubricated and designed to resist moisture and corrosion. The fan blade shall be aluminum with a powder coated epoxy finish.Element: The heating element shall be 304 or 316 stainless steel tube with 304/316 stainless steel fin materia