Attributes . Shape: Circles Care and Application: Instructions: - Clean and dry surface before application. - Peel tape from fastener and press firmly into place. - Adhesive reaches maximum strength after 24 hours. Note: Not recommended for fabrics, flexible vinyl or outdoor use. Continued exposure to full sunlight can damage fastener. Removal Instructions: - Warm the tape (Hook or Loop) with a hair dryer. (Do not use a heat gun) - Peel off the tape (Hook or Loop) the adhesive will remain on the substrate - Warm the adhesive with the hair dryer (again, do not use a heat gun), peel off a piece and roll in a ball - Cool the adhesive down. This may be done with ice in a plastic bag (only takes a few moments) - Stick the ball on the adhesive which is on your substrate and pull it off - Repeat step # 5 until the adhesive is completely removed from the substrate. This may take some time - If any residue tackiness remains on the substrate you may now use a commercial remover like Goo Gone, acetone, WD-40, mineral spirits or c . Names