CategoryL2: Cutting Tools

Products with this attribute (380 total)

Shrink Fit Tool Holder, Hole Dia. 1/2 in, Taper Size CV50, Shank Dia. 1/2 in, Projection 6.3000 in, Nose Dia. 0.9400 in, Coolant Fed Coolant Through, Balanced to RPM 15,000, For Use With Shrink Fit Tools, Includes Backup Screw
Shrink Fit Tool Holder, Hole Dia. 10.00mm, Taper Size BT30, Projection 80.00 mm, Nose Dia. 24.00mm, Coolant Fed Coolant Through, Balanced to RPM 25,000, For Use With Carbide and HSS Tools, Includes Backup Screw
Shrink Fit Tool Holder, Hole Dia. 10.00mm, Taper Size HSK63A, Shank Dia. 10mm, Projection 160.00 mm, Nose Dia. 24.00mm, Coolant Fed Coolant Through, Balanced to RPM 24,000, For Use With Shrink Fit Tools, Includes Backup Screw
Shrink Fit Tool Holder, Hole Dia. 25.00mm, Taper Size BT50, Projection 200.00 mm, Nose Dia. 44.00mm, Coolant Fed Coolant Through, Balanced to RPM 25,000, For Use With Carbide and HSS Tools, Includes Backup Screw
Shrink Fit Tool Holder, Hole Dia. 25.00mm, Taper Size CV40, Projection 130.00 mm, Nose Dia. 44.00mm, Coolant Fed Coolant Through, Balanced to RPM 25,000, For Use With Carbide and HSS Tools
Shrink Fit Tool Holder, Hole Dia. 3/16 in, Taper Size CV40, Shank Dia. 3/16 in, Projection 3.1500 in, Nose Dia. 0.3900 in, Coolant Fed Coolant Through, Balanced to RPM 20,000, For Use With Shrink Fit Tools, Includes Backup Screw
Shrink Fit Tool Holder, Hole Dia. 3/8 in, Taper Size HSK40E, Shank Dia. 3/8 in, Projection 3.1500 in, Nose Dia. 0.9500 in, Coolant Fed Coolant Through, Balanced to RPM 25,000, For Use With Shrink Fit Tools, Includes Backup Screw
Shrink Fit Tool Holder, Hole Dia. 50.00mm, Taper Size BT50, Projection 160.00 mm, Nose Dia. 82.00mm, Coolant Fed Coolant Through, Balanced to RPM 25,000, For Use With Carbide and HSS Tools
Shrink Fit Tool Holder, Hole Dia. 6.00mm, Taper Size BT40, Projection 130.00 mm, Nose Dia. 21.00mm, Coolant Fed Coolant Through, Balanced to RPM 25,000, For Use With Carbide and HSS Tools
Shrink Fit Tool Holder, Hole Dia. 8.00mm, Taper Size BT40, Projection 160.00 mm, Nose Dia. 21.00mm, Coolant Fed Coolant Through, Balanced to RPM 25,000, For Use With Carbide and HSS Tools
Shrink Fit Tool Holder, Hole Dia. 8.00mm, Taper Size CV50, Projection 160.00 mm, Nose Dia. 21.00mm, Coolant Fed Coolant Through, Balanced to RPM 25,000, For Use With Carbide and HSS Tools
Slip-Fixed/Renewable Drill Bushing (SF), Standard Wall, Headed, Fractional Inch, 1 19/64 in
Slip-Fixed/Renewable Drill Bushing (SF), Standard Wall, Headed, Fractional Inch, 1 3/64 in
Slip-Fixed/Renewable Drill Bushing (SF), Standard Wall, Headed, Fractional Inch, 1 3/8 in
SMD Drill Tip,25mm,PK10
Spiral Flute Tap, Thread Size 9/16 In.-18, UNF, Overall Length 3 15/16 in, High Speed Steel, TiN, Thread Length 5/8 in, 75 Percent Thread Drill Size 12.90, Thread Limit H5, Thread Direction Right Hand, Number of Flutes 3
Spiral Flute Tap, Thread Size M12x1, Metric Fine, Overall Length 100.00 mm, Powdered Metal, TiCN, Thread Length 12.00 mm, 75 Percent Thread Drill Size 11.00, Thread Limit D5, Thread Direction Right Hand, Number of Flutes 3
Spiral Flute Tap, Thread Size M12x1.25, Metric Fine, Overall Length 110.00 mm, HSS-E, TiCN, Thread Length 21.00 mm, 75 Percent Thread Drill Size 10.78 mm, Thread Limit 6H, Class of Fit 6H, Thread Direction Right Hand, Number of Flutes 3
Spiral Point Tap, 1/4"-28, Taper, UNF, 3 Flutes, Uncoated
Spiral Point Tap, Thread Size #12-24, UNC, Overall Length 2 11/32 in, HSS-E-PM, Black Oxide, Right Hand, Thread Length 1/2 in, 75 Percent Thread Drill Size 4.45 mm, Thread Limit H3, Number of Flutes 3
Spiral Point Tap, Thread Size 3/8 In.-16, UNC, Overall Length 2 29/32 in, Cobalt, TiN, Right Hand, Thread Length 15/16 in, 75 Percent Thread Drill Size 0.3125 in, Thread Limit H6, Number of Flutes 3
Spiral Point Tap, Thread Size M12x1.25, Metric Fine, Overall Length 85.00 mm, Cobalt, TiN, Right Hand, Thread Length 19.00 mm, 75 Percent Thread Drill Size 10.78 mm, Thread Limit H6, Class of Fit 6H, Number of Flutes 3
Spiral Point Tap, Thread Size M14x1.5, Metric Fine, Overall Length 100.00 mm, High Speed Steel, TiN, Right Hand, Thread Length 21.00 mm, 75 Percent Thread Drill Size 12.50 mm, Thread Limit 6GX, Class of Fit 2B, Number of Flutes 4
Spiral Point Tap, Thread Size M16x1, Metric Fine, Overall Length 100.00 mm, High Speed Steel, Bright (Uncoated), Right Hand, Thread Length 18.00 mm, Thread Limit 6HX, Class of Fit H3, Number of Flutes 4
Spiral Point Tap, Thread Size M16x1.5, Metric Fine, Overall Length 100.00 mm, HSS-E, Bright (Uncoated), Right Hand, Thread Length 21.00 mm, 75 Percent Thread Drill Size 14.50 mm, Thread Limit 6G, Class of Fit 2B, Number of Flutes 4
Sq. End Mill,Single End,Carb,16.00mm
Square End Mill, 1/64 in Milling Dia., Carbide, Bright (Uncoated), Straight, Length of Cut 1/16 in, Overall Length 1 1/2 in, Shank Dia. 1/8 in
Square End Mill, 1/8 in Milling Dia., Carbide, Bright (Uncoated), Non-Coolant Through, Straight, Length of Cut 1/4 in, Overall Length 3 in, Shank Dia. 1/8 in
Square End Mill, 12.00 mm Milling Dia., Carbide, Bright (Uncoated), Straight, Length of Cut 22.00 mm, Overall Length 130.00 mm, Shank Dia. 12.00 mm, Neck Dia. 11.500 mm
Square End Mill, 2.00 mm Milling Dia., TiAlN, Straight, Length of Cut 5.00 mm, Overall Length 50.00 mm, Shank Dia. 4.00 mm
Square End Mill, 20.00 mm Milling Dia., Carbide, Bright (Uncoated), Non-Coolant Through, Straight, Length of Cut 38.00 mm, Overall Length 104.00 mm, Shank Dia. 20.00 mm
Square End Mill, 3/4 in Milling Dia., Carbide, Bright (Uncoated), Non-Coolant Through, Straight, Length of Cut 1 in, Overall Length 6 in, Shank Dia. 3/4 in
Square End Mill, 3/4 in Milling Dia., Carbide, TAZ, Straight, Length of Cut 1 37/64 in, Overall Length 4 in, Shank Dia. 3/4 in, Neck Dia. Not Applicable
Square End Mill, 3/8 in Milling Dia., Carbide, Bright (Uncoated), Straight, Length of Cut 1 1/2 in, Overall Length 4 in, Shank Dia. 3/8 in, Neck Dia. Not Applicable
Square End Mill, 5.00 mm Milling Dia., Carbide, Bright (Uncoated), Straight, Length of Cut 10.00 mm, Overall Length 57.00 mm, Shank Dia. 6.00 mm
Square End Mill, 9/16 in Milling Dia., Carbide, AlTiN, Weldon Flat, Length of Cut 1 1/4 in, Overall Length 3 1/2 in, Shank Dia. 9/16 in
Square End Mill,5/8" Cut Length,nACRo
Square End Mill,Unfinished,1.5"L,Carbide
Square End Mill,WS15PE Grade,Carbide
Square Turning Insert, Chip-Breaker Code EMU, Inscribed Circle 5/8 in, Al203+TiCN
Square Turning Insert, Chip-Breaker Code ENZ, Inscribed Circle 1/2 in, Al203+TiCN
Square Turning Insert, Chip-Breaker Code ESU, Inscribed Circle 1/2 in, Absotech Platinum
Square Turning Insert, Chip-Breaker Code ESU, Inscribed Circle 3/8 in
Square Turning Insert, Square, 3/8 in, SCMT, 1/32 in, Cermet
Standard, Boring Tools, Right Hand, 0.290" Min Bore dia, Max. Bore Depth: 1-1/2"
Standard, Boring Tools, Right Hand, Sharp, 0.160" Min Bore dia, Max. Bore Depth: 1/4"
Standard, Thread Relief Tools, 0.375" (3/8) Min Bore dia, Groove Width: 1/8"
Straight Flute Hand Tap , M42-3.00 , Plug , 4 Flutes, UNC
Straight Flute Tap, Thread Size 1/4 In.-28, UNF, Bottoming, Overall Length 2 1/2 in, Powdered Metal, TiCN, Right Hand, Thread Length 9/16 in, 75 Percent Thread Drill Size 5.45 mm, Thread Limit H3
Straight Flute Tap, Thread Size M10x1.25, Metric Fine, Bottoming, Overall Length 74.00 mm, Powdered Metal, TiCN, Right Hand, Thread Length 18.00 mm, 75 Percent Thread Drill Size 11/32 in, Thread Limit D6
Straight, Thread Mill, NPTF, Carbide, Bright (Uncoated), 0.2800 in
Straight, Thread Mill, UN, Carbide, TiAlN, 0.1870 in
Straight, Thread Mill, UN, Carbide, TiAlN, 1/2 in
T27 HALF CUT TOTX 38SQ DR
Taper Length Drill Bit, Drill Bit Size 3.60 mm, Drill Bit Point Angle 140 Degrees , Split Point, Carbide, TiAlN+AlCrN
The combination of rotation and percussion helps the drill achieve a cutting and grinding rotary action at the same time as a chipping percussive action, chipping away at rock to produce a hole. Usually these motions are hydraulically or pneumatically driven.
Thread Forming Tap, Thread Size 1/2 In.-20, UNC, Overall Length 3 3/8 in, Cobalt, TiCN, Right Hand, Thread Length 7/8 in, 75 Percent Thread Drill Size 12.05 mm, Thread Limit H10
Thread Forming Tap, Thread Size 3/8 In.-16, UNC, Overall Length 2 15/16 in, Cobalt, TiCN, Right Hand, Thread Length 3/4 in, 75 Percent Thread Drill Size 11/32 in, Thread Limit H6
Thread Forming Tap, Thread Size 3/8 In.-16, UNC, Overall Length 2 15/16 in, Cobalt, TiCN, Right Hand, Thread Length 3/4 in, 75 Percent Thread Drill Size 11/32 in, Thread Limit H9
Thread Forming Tap, Thread Size 5/16 In.-18, UNC, Overall Length 2 23/32 in, Cobalt, Black Oxide, Right Hand, Thread Length 5/8 in, 75 Percent Thread Drill Size 7.20 mm, Thread Limit H8
Thread Mill
Thread Mill
Thread Mill - Multi Point Single Profile Solid Carbide Coated
Threaded Shank Drill Bit, Drill Bit Size #11, 135 Degrees Drill Bit Point Angle, Material - Machining High Speed Steel, Finish - Machining Black Oxide, Standards NAS 965 Type B, 1/4 In.-28, Right Hand, 0.1910
TNGG 221LB PV710 Grade PVD Cermet
Tool Blank, Material C5 Micrograin Carbdie, Series 700, Thickness 3/32 In., Width 5/16 In., Length 3/8 In., Tolerance Grind Stock: +0.004 In. to +0.015 In., Finish Unfinished
Tool Holder,586.0305.384,6.417 in. L
Tool Post Holder, Coolant Fed Coolant Through
Triangle Turning Insert, Chip-Breaker Code EGE, Inscribed Circle 3/8 in, Al203+TiCN
Triangle Turning Insert, Chip-Breaker Code ESU, Inscribed Circle 3/8 in
Triangle Turning Insert, Chip-Breaker Code FW, Inscribed Circle 3/4 in
Triangle Turning Insert, Inscribed Circle 3/4 in, Bright (Uncoated)
Triangle Turning Insert, Triangle, 3/8 in, TNMG, 0.0156 in, Carbide
Tuffcut Al 2 Flute End Mill Necked, 4.0Mm
Turning Insert, Chip-Breaker Code EGU, Inscribed Circle 3/8 in, Absotech
Turning Insert, Chip-Breaker Code EMU, Inscribed Circle 5/8 in, Absotech Platinum
Turning Toolholder,DDJNR 2525M1504
Twist Drill, 3MM Dia, Left,60 Degrees
Wood Drilling Bit Set
YG-1 E9990948TF