Product_description: ['[Sensing method] Retro-reflective without M.S.R. function [Sensing distance] 10 mm to 200 mm (When using the E39-R4) [Standard sensing object] Opaque 27 mm dia. Min. [Min. sensing object] 2 mm dia. Min. [Directional angle] Sensor:2 to 20 DEG,Reflector:2 to 20 DEG Min. [Light source] Red LED (Emission wave length: 650nm) [Power supply voltage] 12 to 24 VDC -10% to 10% (ripple(p-p) :10% Max.) [Current consumption] 20mA DC Max. [Control output] Output type: NPN open collector output Load current: 0 to 50 mA Residual voltage: (DC) 1 V Max. (Load current: Less than 10mA) (DC) 2 V Max. (Load current: 10 to 50mA) [Operation mode] Light-ON [Load power supply voltage] 26.4 VDC Max. [Protective circuit] Surge suppressor Output short-cut protection Output reverse polarity protection Power supply reverse polarity protection Mutual interference prevention [Response time] 1ms Max. [Dielectric strength] 1000 VAC at 50/60 Hz for 1 minute between charged parts and the case [Degree of protection] IEC60529: IP67 [Applicable standard (EC Directive (EMC))] EMI: EN60947-5-2 Emission Enclosure: EN55011 Group 1 class A EMS: EN60947-5-2 Immunity ESD: IEC61000-4-2 Immunity RF-interference: IEC61000-4-3 Immunity Burst: IEC61000-4-4 [Conformed standard (EC Directive (CE marking))] Equipped [Connection method] Pre-wired models (Cable length: 2 m) [Indicator] Operation indicator(orange), Stability indicator(green) [Weight (packed state)] Approx. 20 g [Tightening torque] 0.15 N.mMax. (with M2 screw via flat washers or spring washers) [Accessories] Instruction manual, Set screws for mounting(M2*14), Nuts, Reflector(E39-R4) (1)']

Products with this attribute (1 total)