Attribute Values: Other

These CRL Metal Nozzles fit most bulk caulking guns, such as KM32RCT, KM45RCT, DL45T03, DL45T04, or others having a 3/8"-27 thread in the barrel cap. .

These CRL Safety Hard Hats are made from an improved, injection-molded, high-density polyethylene that offers superior protection against impact, penetration, and shock. It has good resistance to chemicals and voltage, yet it weighs less than 12 oz. (340 gm), making it comfortable to wear. The four point integral suspension has a head gripping, extra-contoured nape strap for a better fit. Popular rain trough design prevents water from running down neck. .

These CRL Silicone Rubber Setting Blocks have superior durability, are U.V. resistant, and are compatible with most silicone sealants. They will not discolor the silicone should the two come in contact with each other. Job specific testing prior to start up is recommended with each silicone sealant manufacturer. Technical Information: Polymer: Silicone Temperature Range: -80 to +400?F (-62 to +204.4?C) Hardness, Shore A: 80?5 Tensile, PSI: 750 Elongation, %: 300 Product Warning: To ensure sealant to block compatibility, the manufacturer of the silicone sealant can test the compatibility of job site representative accessory materials with their silicone sealants using ASTM C1087-87. Results of the compatibility test will be forwarded in writing. Testing takes approximately four weeks from receipt of samples. .

These CRL Single-Sided Towel Bars are designed for use on frameless glass doors or fixed panels. Bars are made from 3/4" (19 mm) diameter brass tubing, and come with matching finish metal washers. The narrow inside knob protrudes only 1/4" (6 mm) from the glass surface. SPECIFICATIONS: Material: 3/4" (19 mm) Diameter Brass Tubing (1.5 mil thick); 1-1/4" (32 mm) Diameter Metal Washers Glass Thickness Range: 1/4" to 1/2" (6 to 12 mm) Hole Diameter Required: 1/2" (12 mm) Center-to-Center Hole Spacing: 12" Towel Bar = 12" (305 mm) 18" Towel Bar = 18" (457 mm) 24" Towel Bar = 24" (610 mm) AVAILABLE SIZES: Cat. No. SDTBS12 12" Towel Bar Cat. No. SDTBS18 18" Towel Bar Cat. No. SDTBS24 24" Towel Bar .

These CRL Solid Brass Pull Handles offer a selection of Back-to-Back or Single-Sided styles, with a choice of an economical "No Washer" type, or the Traditional Style Pull with 1-1/4" (32 mm) diameter metal washers. The Back-to-Back Handle includes a pull for each side of the door, and is commonly used in frameless shower door applications. The Single-Sided, No Metal Washers Handle has a 1/8" (3 mm) protruding end cap, and is commonly used for bypassing cabinet and wardrobe doors. All Pull Handles are offered in a choice of 6" and 8" (152 and 203 mm) sizes, and are stocked in finishes to match most bathroom d?cors. Custom finishes are also available on special order. Our offering of quality Pull Handles has grown to over a dozen distinct models in numerous different finishes. There's a handle to complement the d?cor of virtually any shower or wardrobe door, and each one is constructed of only the finest materials. Whether you choose a back-to-back or single-sided handle, you can rest assured that it will be easy-to-install, and will serve its purpose beautifully for many years. Custom designs and finishes are also available when you need something special. SPECIFICATIONS: Material: 3/4" (19 mm) Diameter Solid Brass Rod; 1-1/4" (32 mm) Diameter Washers/Stud Kit Glass Thickness Range: 1/4" to 1/2" (6 to 12 mm) Hole Diameter Required: 1/2" (12 mm) Center-to-Center Hole Spacing: 6" (152 mm); 8" (203 mm) .

These CRL Spanner Head Tamperproof Security Screws protect valuable fixtures and equipment from theft and vandalism, because they are virtually impossible to remove without the special matching screwdrivers. Flat or pan head available in machine or sheet metal Type "A" styles. A regular screwdriver will not work with these screws, you must use a <a href="/search?keyword=sp6d">Spanner Bit</a>. .

These CRL Standard Cold Knife Blades are made of tempered steel for extra strength. The 7/8" (22 mm) size is our biggest seller. Please note these Blades have 1/2" (12 mm) wide shanks. .

These CRL Vertical Sliding Service Windows have one lower sliding panel and one fixed upper panel. They are normally supplied with vinyl to accommodate 1/4" (6 mm) glazing materials, but some models can be ordered pre-glazed with 1/4" (6 mm) tempered glass. Some units are also available with a sliding screen. All windows are shipped assembled, ready for glazing and installation. NOTE: Windows exceeding 1050 square inches (width x height) will require a covered top to conceal sash balances. An overhang or awning is recommended if used in an exterior application. SPECIFICATIONS: Materials: Extruded Aluminum; Tempered Safety Glass (On Some Models); Fiberglass Screen (On Some Models) Finishes: Satin Anodized, Duranodic Bronze, RAL Powder Painted or Kynar Painted Glazing: 1/4" (6 mm) Tempered Glass (On Some Models); Vinyl Supplied on All Models Instructions Included .

These heavy-duty CRL Glass Rail Standoff Base and Caps work with hand or guard railings. The standoff fitting is 2" (51 mm) square with a 1-3/4" (44.5 mm) base. It comes with a 3/8"-16 x 2" Allen stud for mounting to steel, along with necessary gaskets and grommet. Use our Cat. No. SSW12 Spanner Wrench to tighten the cap. Fabricated with 316 grade stainless steel in brushed or polished finishes. SPECIFICATIONS: For use with 1/2"?27/32" (12?21.52 mm) Tempered Monolithic or Tempered Laminated Glass (Do Not Use with Raw or Annealed Glass) Glass Fabrication: One 3/4" (19 mm) Diameter Hole Per Fitting Spacing: Maximum spacing between fittings depends on use and mounting conditions; Minimum hole spacing between standoffs is 4" (102 mm). An Engineering Report is available. Product Warning: For use with 1/2" to 27/32" (12 to 21.52 mm) tempered monolithic or tempered laminated glass. Do not use with raw or annealed glass. NOTE: Bracket spacing and maximum glass panel widths vary depending on use and mounting conditions. .Stainless Steel Advisory: Although Stainless Steel is resistant to corrosion, it is not rust or stain proof. CRL recommends periodic maintenance to help maintain its factory finish. For more information, view the Stainless Steel Disclaimer found in the Technical References section below.

These Kits can be used to fabricate Heavy-Duty Posts used at the end of a barrier, or to join two panels at 180 degrees. They can accommodate 1/4" to 3/8" (6 to 10 mm) panels when dry glazed with vinyl, and 1/2" to 9/16" (12 to 13.52 mm) panels when wet glazed. They are available in seven standard colors, plus mill aluminum, with custom colors available on request. NOTE: Maximum Post Spacing is 72" (1.83 m) on center. Maximum square footage should not exceed 24 square feet per panel. Product Warning: All ARS/AWS products are painted to order and are non-refundable or returnable. .

These Mitered Support Bar Wall Mount Brackets are designed to attach to the wall using the included screw. These Brackets are perfect for inline 180 degree shower enclosures, and fit on the end of our Support Bars. When run at an angle toward an adjacent wall, they will fit flush due to their mitered ends, and secure the fixed panel. NOTE: Can be used with S1, S2, and S80 Bars. .

These non-handed CRL 4" x 10" Glass Keepers are for use on glass panels adjacent to swinging doors using our DE4102 Series Two-Point Center Locks. Most shipping weights are approximate and have not been verified. If the exact weight is needed in order to determine shipping costs, and shipping costs are required in order for you to complete your order, please request this prior to submitting your order by contacting CRL Customer Service. Product images shown are of the actual product or a close representation. Colors can vary depending on your computer's video card and on how your monitor's color is adjusted.

These outriggers are prep for corner conditions, where customer in doing a pick & pack or does not want a welded corner. Countersunk screws are done at angles to be able and accomplished the miter condition. Most shipping weights are approximate and have not been verified. If the exact weight is needed in order to determine shipping costs, and shipping costs are required in order for you to complete your order, please request this prior to submitting your order by contacting CRL Customer Service. Product images shown are of the actual product or a close representation. Colors can vary depending on your computer's video card and on how your monitor's color is adjusted.

These PH40 Patch Fittings With PK Series Stop/Strikes are used to provide a positive stop for the door and a strike or keeper for the Panic or Deadbolt. They are for use on single doors, and are available in several architectural finishes. Our PH40 Patch Fitting With ESK Series Stop/Strikes come with a Folger Adam? 310 1-3/4" (45 mm) Fail Secure Electric Strike. They provide a positive stop for the door, and a strike or keeper for the Panic or Deadbolt. Stop/Strikes are for use on doors. Minimum order one each. Folger Adam is a registered trademark of Southern Folger Detention Equipment Company. .Stainless Steel Advisory: Although Stainless Steel is resistant to corrosion, it is not rust or stain proof. CRL recommends periodic maintenance to help maintain its factory finish. For more information, view the Stainless Steel Disclaimer found in the Technical References section below.

This 'J0' Type Arm Assembly with Mortise Type Slide-Track for 7/8" Deep Rails is intended for use with our CRL line of <a href="/search?keyword=Overhead%20Concealed%20Door%20Closers">Overhead Concealed Door Closers</a>. The assembly includes a slide-track, offset arm and all mounting hardware. The slide-track requires a minimum depth top Rail of 7/8" (22 mm) for surface mounting or is mortised into the door to obtain proper Rail depth. For a replacement Vinyl Slide Block order Cat. No. J0SB. .

This 3/4" Stainless Steel L-Angle is used in glass and mirror installations where a brite finish is required, and the use of Stainless Steel is necessary. When you need to make a miter cut in the Stainless Steel Channel our Cat. No. MT702 Miter Tool can be used. Matching CRL Stainless Steel Molding Products are available: <li><a href="/search?keyword=SS960">J-Channel</a> </li><li><a href="/search?keyword=SS961">Mirror Divider</a> </li><li><a href="/search?keyword=SS962">Outside Corner Molding</a> </li><li><a href="/search?keyword=SS964">1/2" (12.7 mm) L-Molding</a> </li><li><a href="/search?keyword=SS965">3/4" (19 mm) L-Molding</a> .</li>

This CRL 1/2" Single U-Channel is a wide single channel that is designed for universal applications, but is generally used for single track assemblies at the top or as a side jamb. Available in several finishes, this versatile extrusion should be maintained in your shop inventory. SPECIFICATIONS: Material: 6063-T5 Aluminum Alloy Thickness: .05 (1.45 mm) Stock Length: 12' (3.66 m) Typical Uses: Generally Used as a Single Track or Side Jamb Product Warning: Stock lengths must ship common carrier unless specifically cut for UPS shipment. .

This CRL 18" (457 mm) Stretch Wrap is an easy way to secure pallet loads without strapping or expensive tie-downs. The roll fits on the economical, Heavy-Duty Dispenser to facilitate wrapping and stretching of the film to secure the load. The adjustable Heavy-Duty Dispenser can accommodate rolls with a standard 3" (76 mm) core and a range of 12" to 20" (305 to 508 mm) wide. The adjustable tension allows full control of the Stretch Wrap. .

This CRL 3/4" x 1/4" (19 x 6 mm) Screen Frame is made of .019 mil thick roll formed aluminum. It is cambered (slightly bowed) to retain screen tension when installed. It accepts CRL .140" Spline. Use either WSC104 Aluminum Corners for mitered frame corners or SWSC14 Series Square Cut Plastic Corners for a square cut frame application. SPECIFICATIONS: Material: Roll Formed Aluminum Wall Thickness: .019" (.48 mm) Uses Spline Size: .140" (3.6 mm) Uses Corners: WSC104 for Mitered Corners; SWSC14 for Square Cut Corners Product Warning: Stock lengths must ship common carrier unless specifically cut for UPS shipment. Because of tolerances in coil stock and stretch in the roll forming process, stock thicknesses can range from the advertised thickness plus or minus .002" (.05 mm). This is standard in the industry. .

This CRL 3/4" x 5/16" (19 x 7.9 mm) Screen Frame is made of .020 mil thick roll formed aluminum. It is cambered (slightly bowed) to retain screen tension when installed. It will accept CRL .150" Spline. You can use either WSC105 Aluminum Corners or WSPC105 Plastic Corners for mitered frame corners or SWSC516 Series Square Cut Plastic Corners for a square cut frame application. SPECIFICATIONS: Material: Roll Formed Aluminum Wall Thickness: .020" (.51 mm) Uses Spline Size: .150" (3.8 mm) Uses Corners: WSC105 or WSPC105 for Mitered Corners; SWSC516 for Square Cut Corners Product Warning: Stock lengths must ship common carrier unless specifically cut for UPS shipment. Because of tolerances in coil stock and stretch in the roll forming process, stock thicknesses can range from the advertised thickness plus or minus .002" (.05 mm). This is standard in the industry. The Recommended Spline Size for This Frame Varies From .150 To .165 Diameter. The Difference in Size is Due to Variations in Spline Groove Width, Spline Diameter and Type of Screen Wire Being Used. Most shipping weights are approximate and have not been verified. If the exact weight is needed in order to determine shipping costs, and shipping costs are required in order for you to complete your order, please request this prior to submitting your order by contacting CRL Customer Service. Product images shown are of the actual product or a close representation. Colors can vary depending on your computer's video card and on how your monitor's color is adjusted.

This CRL 3/4" x 7/16" (19 x 11 mm) Screen Frame is made of .020 mil thick roll formed aluminum. It is cambered (slightly bowed) to retain screen tension when installed. It will accept CRL .165" Spline. You can use either WSC107 Aluminum Corners or WSPC107 Plastic Corners for mitered frame corners or SWSC716 Series Square Cut Plastic Corners for a square cut frame application. SPECIFICATIONS: Material: Roll Formed Aluminum Wall Thickness: .020" (.51 mm) Uses Spline Size: .165" (4.2 mm) Uses Corners: WSC107 or WSPC107 for Mitered Corners; SWSC716 for Square Cut Corners Product Warning: Stock lengths must ship common carrier unless specifically cut for UPS shipment. Because of tolerances in coil stock and stretch in the roll forming process, stock thicknesses can range from the advertised thickness plus or minus .002" (.05 mm). This is standard in the industry. .

This CRL 4" (102 mm) Square End Cap is used to finish the installation on our <a href="/productsubcategory/A07_AH">CRL Sidelite Rails</a>. Each End Cap matches the finish of the Sidelite and Door Rails perfectly. Attaches with provided matched finish machine screw. Our policy for Quick Pick products is as follows: These products are stocked in our centralized service center, and upon your order will be shipped on our next re-supply truck to your regional CRL service center. Re-supply trucks ship every week, so if your regional service center does not have stock of the product you require, your order can be filled in just a few days. You can check the stock availability of any CRL product when you click on the box above marked "CHECK STOCK AVAILABILITY". .

This CRL 4" Tapered End Cap for Wedge-Lock? Corner Patch Rails is split and intended to finish the installation of the Corner Patch Rail when the glass extends from the bottom of the Patch. Each End Cap (consisting of both sides) matches the finish of the Wedge-Lock? Corner Patch perfectly. Attaches with provided matched finish machine screw. One each consists of both sides including screws. Our policy for Quick Pick products is as follows: These products are stocked in our centralized service center, and upon your order will be shipped on our next re-supply truck to your regional CRL service center. Re-supply trucks ship every week, so if your regional service center does not have stock of the product you require, your order can be filled in just a few days. You can check the stock availability of any CRL product when you click on the box above marked "CHECK STOCK AVAILABILITY". .

This CRL 4-Bar Hinge is made of stainless steel and is non-handed. These hinges are designed for use with both project-out awning windows and also casement windows that have a lip on the outside edge of the sash. The hinge mechanism allows the sash to project out from the frame before it pivots. One hinge set per package. .

This CRL 8B Series Square Base Shoe is the same profile as our standard B5S Series, but it is 30% lighter, which means it is more price competitive, environmentally friendly, and will reduce your shipping costs. Designed to work with CRL's patented TAPER-LOC? System, 8B can be easily cut to the required length using a chop saw with a minimum 10" (254 mm) saw blade for aluminum. Product Warning: CRL does not recommend direct powder coating of this base shoe extrusion. Powder coated cladding applied over the base shoe is the recommended method. All pre-drilled CRL Base Shoes have a +1/8 (3 mm)/-1/16 (1.5 mm) tolerance between each hole drilled in the base. Before drilling installation holes in the concrete or steel substrate it is recommended that the installer place the base shoe into the planned final position, then mark the position of the holes to be drilled into the substrate. .

This CRL Acrylic Mirror Towel Bar will beautifully complement your mirrored wall installation. An adhesive backing on each base makes it easy-to-install. Bar has a diameter of 3/4" (19 mm). AVAILABLE LENGTHS: <li><a href="/search?keyword=MTBC12">12" (305 mm)</a> </li><li><a href="/search?keyword=MTBC18">18" (457 mm)</a> </li><li><a href="/search?keyword=MTBC24">24" (610 mm)</a> .</li>

This CRL Blumcraft? Glass Door Dummy Handle is designed to allow maximum view and a contemporary look to 3/4" (19 mm) tempered glass doors. Installations can be made on single or double doors. The handles are designed to fit on 36" to 48" (914 mm to 1.22 m) wide doors ranging in height from 80" to 108" (2.03 to 2.74 m) high. Custom Headers available with your choice of pre-installed hardware. Dustproof Strike available for doors secured at bottom. SPECIFICATIONS Material: <li>1-1/4" (32 mm) Diameter 385 Bronze or 304 Stainless Steel Tubing (2 mm Thick) Glass Thickness: </li><li>3/4" (19 mm) Glass Fabrication: Varies </li><li>Please contact <a href="/contactus?site=US">DK Hardware Sales</a> ORDERING OPTIONS When ordering Dummy Handles you must specify: </li><li>Right or Left Hand (as Viewed from the Outside) </li><li>Rail Mount (for Doors with Full Length Rails) or Glass Mount (for Doors with Patch Rails) </li><li>Brushed or Polished Stainless, Satin or Polished Brass Finish For more information contact our Commercial Products Technical Sales Department. .Stainless Steel Advisory: Although Stainless Steel is resistant to corrosion, it is not rust or stain proof. CRL recommends periodic maintenance to help maintain its factory finish. For more information, view the Stainless Steel Disclaimer found in the Technical References section below.</li>

This CRL Blumcraft? Glass Door Panic Handle is designed to allow maximum view and a contemporary look to 3/4" (19 mm) tempered glass doors. Installations can be made on single or double doors. For your convenience, we have designed the handles so they are ready-to-install on 36" to 48" (914 mm to 1.22 m) wide doors ranging in height from 90" to 102" (2.29 to 2.59 m) high without modifications. "Dogging", locking the device in the open position, is easy with just a slide of a knob. A Door Stop/Strike must be ordered separately. Threshold Strike Plate available for PA110 Series. Custom Header available with your choice of pre-installed hardware. SPECIFICATIONS Material: <li>1-1/4" (32 mm) Diameter 385 Bronze or 304 Stainless Steel Tubing (2 mm Thick) Glass Thickness: </li><li>3/4" (19 mm) Glass Fabrication: Varies </li><li>Please contact <a href="/contactus?site=US">DK Hardware Sales</a> ORDERING OPTIONS When ordering Panic Handles you must specify: </li><li>PA100 or PA110 Series </li><li>Right or Left Hand (as Viewed from the Outside) </li><li>Rail Mount (for Doors with Full Length Rails) or Glass Mount (for Doors with Patch Rails) </li><li>Standard Retainer Plate or Optional Keyed Access Device </li><li>Brushed or Polished Stainless, Satin or Polished Brass Finish </li><li>Optional Threshold Strike Plate (PA110 Series Only) For more information contact CRL Commercial Products Technical Sales Department. .</li>

This CRL Carbide Cutting Wheel 134? is used for Somaca/CRL Stalter Glass Cutting Machine Cat. No. 46082RB. .

This CRL Casement Window Operator is a quality metal operator designed to replace most obsolete models. Its smooth movement and durable construction allow for years of trouble free use. It has a square housing style and a 3/8" (10 mm) spline size. The operator has two sets of screw holes, 3-7/8" and 4-3/4" (98.4 and 121 mm). Handing of CRL Casement Window Operators is determined by the hinged side of the window when looking from the inside out. One operator, handle and installation screws per package. .

This CRL Combination Strike/Keeper is used for Panic Handle installations when only one of a pair of doors is to receive an <a href="/search?keyword=ES3101">ES3101 Electric Strike</a> and the other door is to have a manual strike. This combines both functions into a single uniform housing. NOTE: This item is intended for use when the LHR door requires an electronic strike and the RHR door requires a manual strike. .

This CRL Counterbalanced Tilting Cutting Table is constructed of heavy gauge steel, electrically welded and painted. A full 3/4" smooth particle board table top and carpet with adhesive is included. All tables are custom built with tops pre-fitted and drilled. Tables are then disassembled and crated for shipping. Table top and carpet requires minimal assembly. All tables have casters and are equipped with floor locks and retractable wooden shoes. The manually operated table is noted for its ease of operation. Counter-balance mechanism is designed for one person handling of large lites of glass. Tables are shipped knocked down without counterbalance weights. (Cement blocks or bricks are used for counterbalancing.) Product Warning: A forklift is required to safely unload this table from the delivery truck. Loading Dock Recommended. .

This CRL Door Seal Weatherstrip is for GM cars and is manufactured to OEM specifications. These extruded closed cell sponge rubber moldings will not absorb water and are easily applied by peeling back the liner to expose the adhesive on one side. Use CRL Quick Release Agent <a href="/search?keyword=CRL958">CRL958</a> to soften the adhesive for quick removal of old weatherstrips. Clean up excessive adhesives with our <a href="/search?keyword=CRL2032">CRL2032</a> General Purpose Solvent and Adhesive Cleaner. See our <a href="/search?keyword=C02AD_AU">automotive clip and fasteners</a> section for additional replacement parts for your customer's vehicle. .

This CRL Door Stop and Holder is mounted to the door by three wood screws. Simply kicking down the stop in the desired hold open position will keep the door open until the stop is raised. One door stop and installation hardware per package. .

This CRL Dual Seal Insulating Glass Starter Kit has all the components necessary to fabricate Dual Seal Insulating Glass units. Polyisobutylene, a one-part, non-drying, non-hardening ribbon material with exceptionally low vapor transmission and non-fogging characteristics, forms the primary seal. Insulating Glass Silicone, (applied with a standard caulking gun), specifically formulated for bonding and sealing Insulating Glass units, makes the secondary seal. The Dual Seal Spacer is grooved on the shoulder, allowing it to accept the Polyisobutylene Tape, while the taper below the shoulder will accept the Silicone secondary seal. KIT INCLUDES: CAT. NO.DESCRIPTIONQUANTITY2132559Polyisobutylene Tape1 Case 9542Insulating Glass Silicone48 Cartridges MSD55 Pound (2.2 kg) Can Molecular Sieve2 Cans 991251/4" (6 mm) Dual Seal Aluminum. Spacer50 each 12'8" 991273/8" (10 mm) Dual Seal Aluminum. Spacer25 each 12'8" 991291/2" (12.7 mm) Dual Seal Aluminum. Spacer50 each 12'8" 921751/4" (6 mm) Dual Seal Spacer Corners200 Each 921773/8" (10 mm) Dual Seal Spacer Corners100 Each 921791/2" (12.7 mm) Dual Seal Spacer Corners200 Each 1550Lint-Free Wipes1 Case (900 Wipes) 695Concentrated Glass Cleaner1 Gallon (3.785 l) DB21Plastic Spray Bottles2 Each NG171Lint-Free Gloves (Large)1 Dozen Pairs 321WWhite Sil. Acrylic Latex Glazing Sealant10 Cartridges 321GRYGray Sil. Acrylic Latex Glazing Sealant10 Cartridges JC3202HTPlastic Tipped Handy Clamps12 Each GM15Basic Insulating Glass Manual1 Each .

This CRL End Cap easily slips into our 11 Gauge Cap Railing. Use our Cat. No. 32629 Metal Contact Cement to achieve a secure and permanent bond. Standard stainless alloy is 304. Stainless alloy 316 is available on special order. Contact DK Hardware Sales for more information. .Stainless Steel Advisory: Although Stainless Steel is resistant to corrosion, it is not rust or stain proof. CRL recommends periodic maintenance to help maintain its factory finish. For more information, view the Stainless Steel Disclaimer found in the Technical References section below.

This CRL End Cap easily slips into the Cap Railing. Use of our <a href="/search?keyword=32629">32629 Metal Contact Cement</a> is required to achieve a secure and permanent bond. Standard stainless alloy is 304. Stainless alloy 316 is available on special order. For more information contact CRL Railing Products Technical Sales Department. .Stainless Steel Advisory: Although Stainless Steel is resistant to corrosion, it is not rust or stain proof. CRL recommends periodic maintenance to help maintain its factory finish. For more information, view the Stainless Steel Disclaimer found in the Technical References section below.

This CRL Extruded Aluminum and Nylon Brush Door Sweep is designed to be applied to the "stop" perimeter of a frame to prevent energy loss and reduce noise infiltration. This Weatherstrip uses thousands of flexible bristles allowing a seal on uneven and even surfaces. Bristles are available in 11/32" (8.7 mm), 5/8" (16 mm), and 3/4" (19 mm) lengths. Supplied with screws for easy installation. Most shipping weights are approximate and have not been verified. If the exact weight is needed in order to determine shipping costs, and shipping costs are required in order for you to complete your order, please request this prior to submitting your order by contacting CRL Customer Service. Product images shown are of the actual product or a close representation. Colors can vary depending on your computer's video card and on how your monitor's color is adjusted.

This CRL Fin Splice Fitting is designed to work with 3/4" (19 mm) glass. The Splice Fittings are used to stack multiple pieces of glass to construct extra tall fins used to stabilize the glass facade. SPECIFICATIONS: For Use With: 3/4" (19 mm) Tempered Glass Do Not Use With: Annealed or Raw Glass Glass Fabrication Required: One 7/8" (22 mm) Diameter Hole Per Glass Fastening Templates: Available on Request for Each Fitting Product Warning: Do not use with annealed or raw glass. .Stainless Steel Advisory: Although Stainless Steel is resistant to corrosion, it is not rust or stain proof. CRL recommends periodic maintenance to help maintain its factory finish. For more information, view the Stainless Steel Disclaimer found in the Technical References section below.

This CRL Floor Mounted Door Stop is for heavy-duty applications. The Stop is made of wrought steel with a soft resilient rubber bumper. It can be used on undercut doors up to 1-1/2" (38 mm). .

This CRL Front Rest Replacement Roller is used on our Model 200 Sander. The <a href="/search?keyword=CRP6">front rest roller</a> and <a href="/search?keyword=CRP7">axle with grease fitting</a> supports glass during sanding. Roller and axle may also be used on some Somaca sanders. .

This CRL Glass Mounted Standard Pull Handle is available in three sizes and in many different architectural finishes. SPECIFICATIONS: For Use With: 3/8" to 3/4" (10 to 19 mm) Glass Construction: 1" (25 mm) Diameter Stainless Steel or Brass Tubing.<li>*1-1/4" (32 mm) Diameter Stainless Steel (Cat. No. CD24X24BS125 Model only). Offset: 3" (76 mm) Center-to-Center Glass Fabrication Required: Two 5/8" (16 mm) Diameter Holes INCLUDES: 2 Each: Through-Bolts for Glass Mounting 4 Each: 1-1/4" (32 mm) Diameter Matching Finish Metal Washers and Rubber Gaskets Product Warning: THE TB2CH, TB4CH, AND F40WK SERIES ARE NOT COMPATIBLE WITH THE CD24X24BS125. CONTACT TECHNICAL SALES FOR ASSISTANCE. .Stainless Steel Advisory: Although Stainless Steel is resistant to corrosion, it is not rust or stain proof. CRL recommends periodic maintenance to help maintain its factory finish. For more information, view the Stainless Steel Disclaimer found in the Technical References section below.</li>

This CRL Glass Mounted Straight Push/Pull Handle Combination is available in two different sizes and many attractive architectural finishes. SPECIFICATIONS: For Use With: 3/8" to 3/4" (10 to 19 mm) Glass Construction: 1" (25 mm) Diameter Stainless Steel or Brass Tubing Glass Fabrication Required: Three 5/8" (16 mm) Diameter Holes, 10" (254 mm) Center-to-Center 12" (305 mm) Center-to-Center 28" (711 mm) Center-to-Center 33" (838 mm) Center-to-Center Offset: 3" (76 mm) Center-to-Center Optional 1-1/4" (32 mm) Diameter Available on Special Order INCLUDES: 2 Each: Through-Bolts for Glass Mounting 4 Each: 1-1/4" (32 mm) Diameter Matching Finish Metal Washers and Rubber Gaskets .

This CRL Hand Railing Tubing is formed using precision tooling to maintain uniform diameters, allowing for smooth hairline transitions at splices and end caps. Use of our <a href="/search?keyword=32629">32629 Metal Contact Cement</a> is required to achieve a secure and permanent bond at all connections. Standard stainless alloy is 304. Stainless alloy 316 is available on special order. Contact <a href="/contactus?site=US">DK Hardware Sales</a> for more information or a quote. .

This CRL Latch and Pull is non-handed. It is plastic inside and outside Pulls, with a stamped steel hook. One steel hook and black plastic inside and outside pull per package. .

This CRL Nylon Bottom Guide comes complete with spring and cap nut. Two guides per package. .

This CRL OEM Replacement Threshold is a replacement for Premier Patio Door thresholds. The 4-1/8" (104.8 mm) wide threshold is supplied with a PVC barrier strip to protect against corrosion. For additional barrier strips order <a href="/search?keyword=THBS8">THBS8</a>. We recommend either <a href="/search?keyword=M66GRY">M66GRY</a> or <a href="/search?keyword=777GRY">777GRY</a> for use as a threshold sealant. The threshold can be shipped via UPS at the over size rate, but for large quantity orders it may be more economical to use common carrier. .

This CRL Offset Pivots are full mortise and non-handed for use with CRL Door Rails, as well as aluminum, wood and hollow metal doors. Supplied with matching finish wood and machine screws. .

This CRL Outside or Exterior Side Top Hanger Bracket is used with the EK Series Slider Kit. Works in conjunction with Interior Top Hangers Cat. No. EK671. Component items for our "EK" Suite Series Frameless Sliding Shower Doors are ideal for use as replacement parts, or for units you wish to fabricate yourself. Stock lengths of the Extrusions, individual Towel Bars, Knobs, and accessory hardware provide all of the options you need to build your own inline enclosures for 1/4" (6 mm) tempered glass. You can also send our Shower Technical Sales Department a drawing of the enclosure. They will be happy to quote a custom unit. .

This CRL Overhead Concealed Closer for Patch Fittings and Door Rails is A.D.A. Compliant at 8.5 lb. opening force for exterior doors and features a longer spindle approximately 3/4" (19 mm), the preferred length when used in conjunction with Patch Hardware Fittings. The closer has dual action valves for closing operation (one valve for closing, one valve for latching). 90? and 105? Hold Open and No Hold Open models are available. Interchangeable with International, Jackson? and similar brands of Overhead Concealed Closers. Mounting Clips and instructions are included with each Door Closer Body. NOTE: Although A.D.A. Series Door Closers comply with A.D.A. specified opening forces, they might not provide adequate spring power to control and close the door due to varying site conditions and door size. Extended Length Spindle 3/4" (19 mm) Length Spindle for use with Patch Fittings and Door Rail Hardware or when extra reach is needed. Independent Adjustment Valves Non-Critical valve control adjusts both Closing Speed and Latching Speed independent of each other. Special Retaining Rings Prevent the Adjustment Valve Screws from being backed all the way out of the Door Closer Body. Weight and Size Limitations Door Weight: 200 Lbs. (91 kg) Exterior Door Width: 42" (1.07 m) Interior Door Width: 48" (1.22 m) All Doors Height: 96" (2.44 m) Product Warning: This Closer is not to be used for doors weighing in excess of 200 Lbs. (91 Kg) or wider than 36" (914 mm). .

This CRL Overhead Track Extrusion is one of our many Pass-Thru Window components that can simplify your project. We can send you full instructions for easy fabrication and installation of efficient and economical CRL Pass-Thru Windows. This extrusion is only available in 10' (3.05 m) lengths. CRL Extrusions can be used almost anywhere you can imagine a need for them. These extrusions are extremely versatile and are used for both commercial and residential applications. The wide range of styles and types to choose from will solve almost any project dilemma while performing their structural functions. Product Warning: Stock lengths must ship common carrier unless specifically cut for UPS shipment. .

This CRL Plastic Reflective Tape has a mirror-like finish that blends easily to hide butt joints and rough edges on mirror walls. It is flexible to conform well to curves and irregularities. Backed with adhesive to hold firmly in place. 100' (30.5 m) per roll. SPECIFICATIONS: Material: Natural ABS Roll Length: 100' (30.5 m) Typical Use: Hide butt joints and rough edges on mirror walls. .

This CRL Polishing Wheel is made of a specially prepared rubber base material mixed with special polishing compounds. It is designed for use on the CRL AL4/5/6 edger. .

This CRL Project-In Casement Window Locking Handle has a single 3/8" (10 mm) screw hole, 1" (25.4 mm) hook projection, and a 3/16" (4.7 mm) grip. It has a heavy bronze casting with a dark bronze finish. This type of handle is used on old style casement windows. It fits on Fenestra and other casement or projecting windows. Each package contains one handle. .

This CRL Replacement Blade Kit is available to bring your original TLK5 TAPER-LOC? Installation and Removal Tool Kit current and enables one tool to work with all different base shoes and glass thicknesses. Kit Consists of: <li>One pair of Yellow Blades and Pusher Plate for monolithic windscreen installs. </li><li>One pair of Blue Blades and Pusher Plate for monolithic surface mount guard rail and railing installs. </li><li>One pair of Red Blades and Pusher Plate for monolithic recessed mount guard rail and railing installs. </li><li>One black Pusher Plate for all laminated glass installs, and a Laminated Glass Setting Tool. NOTE: This Upgrade Kit intended for TLK5 Tools sold after December, 2008. .</li>

This CRL Replacement Washer is intended to protect the glass surface between the standoff cap and the standoff base. This Replacement Washer is designed to work with the <a href="/search?keyword=CAP12BS">1/2" (12.7 mm) Standoff Cap Assembly</a>. The Washer is a standard component of the Cap Assembly but there may be need to occasionally replace or add washers depending on the frequency of standoff disassembly. Anyone who regularly uses <a href="/search?keyword=S0B12112BS">1/2" Standoff's</a> will want to keep extra Replacement Washers in stock. This Clear Replacement Washer with Large Hole is intended to fit just underneath the Cap Assemble while the <a href="/search?keyword=SW012S">Clear Replacement Washer with Small Hole</a> is intended to be placed between the panel material and the Standoff Base. .

This CRL Ribbed Aluminum Grid stock is designed to be installed on existing glass windows to produce a gridded French or Colonial window appearance. The grid is applied to the window surface using Cat. No. RTV408C Clear Silicone as an adhesive. Most shipping weights are approximate and have not been verified. If the exact weight is needed in order to determine shipping costs, and shipping costs are required in order for you to complete your order, please request this prior to submitting your order by contacting CRL Customer Service. Product images shown are of the actual product or a close representation. Colors can vary depending on your computer's video card and on how your monitor's color is adjusted.

This CRL Single Mortise Keyed Different Cylinder has a solid brass housing and supplied with a CRL DRA10 Cam. 1-5/32" (29.4 mm) diameter, 1" (25.4 mm) long 5-pin cylinder, core face is US26D finish, Schlage? 'C' keyway configuration keyed randomly. Includes a .117 (3 mm) cylinder ring. .

This CRL Sliding Glass Door Roller Assembly has a 25/32" (19.8 mm) wide, 27/32" (21.4 mm) tall adjustable steel housing assembly. The flat steel ball bearing roller is 1/4" (6 mm) wide. The assembly fits on doors by several patio door manufacturers. Each package contains one roller assembly. .

This CRL Sliding Glass Door Roller Assembly has a 7/8" (22 mm) wide adjustable diecast housing assembly. The nylon ball bearing roller is 7/16" (11 mm) wide. The assembly fits on doors by Art Door and other patio door manufacturers. Each package contains one roller assembly. .

This CRL Stainless Steel Allen Screw is available in incremental lengths from 3/4" to 3" (19 to 76.2 mm) and is for use with <a href="/search?keyword=H11C">Standoffs</a>, <a href="/search?keyword=E08B_HR">Hand Rail Mounting Brackets</a> and other products that require this type of Allen Screw. .

This CRL Stainless Steel Threaded Rod is a full 36" (914 mm) lengths of stainless or zinc threaded rod will permit you to cut rod to desired length. Most shipping weights are approximate and have not been verified. If the exact weight is needed in order to determine shipping costs, and shipping costs are required in order for you to complete your order, please request this prior to submitting your order by contacting CRL Customer Service. Product images shown are of the actual product or a close representation. Colors can vary depending on your computer's video card and on how your monitor's color is adjusted.

This CRL Storefront Door Pile Weatherstrip is made of water-repellent pile woven onto a polypropylene backing strip, which inserts easily into the pile channel of commercial doors. Pile Weatherstrip helps keep heated or cooled air from escaping around the door's frame, thus reducing energy loss. It will not affect the normal operation of the door. The black color will match the finish of most commercial doors. Most shipping weights are approximate and have not been verified. If the exact weight is needed in order to determine shipping costs, and shipping costs are required in order for you to complete your order, please request this prior to submitting your order by contacting CRL Customer Service. Product images shown are of the actual product or a close representation. Colors can vary depending on your computer's video card and on how your monitor's color is adjusted.

This CRL Stud and Eyelet Fastening Kit provides a easy remedy to broken or missing snap fasteners. The CRL Stud and Eyelet Fastening converts your Vice Grip pliers into a snap fastener repair tool. The Clincher and Anvil slide over the jaws of the pliers and provide the base to hold and flare the eyelet stems. The Kit contains the following pieces: Six AV7677 Buttons, six AV7678 Snap Sockets, one Anvil, and one Clincher. Vise Grips not included. .

This CRL Sunset Series Post Mounted Hand Rail Bracket is made of 316 Grade Stainless Steel and Two Flat Head Allen M6 x 1.0 x 5/8" Stainless Steel Machine Screws. .Stainless Steel Advisory: Although Stainless Steel is resistant to corrosion, it is not rust or stain proof. CRL recommends periodic maintenance to help maintain its factory finish. For more information, view the Stainless Steel Disclaimer found in the Technical References section below.

This CRL Support Bar U-Bracket is designed to be used with all of our CRL Support Bars for Glass-to-Glass or Wall-to-Glass applications. They are available in many finishes which match our most popular CRL Frameless Shower Door Hardware. This CRL Support Bar U-Bracket is designed to be used with all of our CRL Support Bars for Glass-to-Glass or Wall-to-Glass applications. They are available in many finishes which match our most popular CRL Frameless Shower Door Hardware. .

This CRL Swivel Glass Attachment can be installed from the exterior of the wall. This glass attachment can tilt up to 6 degrees in any direction on its wall and socket joint. This allows for any stress applied to the glass to be more evenly distributed across the entire panel of glass, rather than concentrating at the hole. .Stainless Steel Advisory: Although Stainless Steel is resistant to corrosion, it is not rust or stain proof. CRL recommends periodic maintenance to help maintain its factory finish. For more information, view the Stainless Steel Disclaimer found in the Technical References section below.

This CRL Top and Bottom Socket for 80 Series Steel Standards is designed to hold <a href="http://www.dkhardware.com/crlapps/showline/default.aspx?GroupID=4241&Path=3::3570::3578::4241">KV Steel Standards</a> when installed in showcase or cabinet frames. The Sockets are installed at the base of the showcase or cabinet which secures the lower portion of the standard; the top Socket is installed to the showcase frame or wall which fastens the top of the standard and stabilizes the standard, bracket and shelf. .

This CRL Top Quality Aluminum Extrusion can be used almost anywhere you can imagine a need for it. This extrusion is extremely versatile and is used for both commercial and residential applications. The wide range of styles and types to choose from will solve almost any project dilemma while performing their structural functions. This CRL Bottom Front Rail Extrusion is specifically designed for showcases with bottom panels made of wood or laminate. Product Warning: Stock lengths must ship common carrier unless specifically cut for UPS shipment. .

This CRL Vinyl U-Molding is used to protect edges of glass cases, sliding doors and more from chipping. Product Warning: Stock lengths must ship common carrier unless specifically cut for UPS shipment. .

This CRL Wardrobe Nylon Roller has four, 17/32" (13.5 mm), round edge nylon rollers on a nylon carrier with a 1-1/4" (32 mm) stud on a steel mounting plate. Used on top suspended accordion doors and shutters. One roller assembly with installation screws per package. .

This CRL Window Roller Assembly has a 1/2" (12.7 mm) wide nylon housing and guide with a 7/16" (11 mm) diameter flat edge steel roller. Two roller assemblies per package. .

This CRL Window Sash Lock has a universal design. It fits on aluminum, vinyl or wood double hung windows. The cam-action lock holds the window securely closed. It has a diecast construction with a black finish. Take advantage of the savings offered by CRL by buying in bulk. Each package contains 20 of this popular sash lock. Not only do you save money, but you are sure you will have them on hand when needed. 20 locks per package. .

This CRL Wood's 1,200 Pound Capacity Gentle Giant Vacuum Lifting Frame is designed for vertical lifting of large lights of glass. Overhead cranes or hoists of your supply provide upward and downward movement. This vertical lifter is used when rotation and tilt are not required for load positioning. The 'T' shaped frame distributes the lift equally, providing rigidity and stability across the glass surface. Vacuum controls are conveniently mounted on the lower bar assembly for easy access. Standard Pad Spread: Cat. No. VLGG109AC: 51" x 117-1/4" (1.30 x 2.98 m) Cat. No. VLGG1011LAC: 53-3/4" x 120" (1.37 x 3.05 m) Number/Size of Pads: Cat. No. VLGG109AC: 10/9" (229 mm) Diameter Cat. No. VLGG1011LAC: 10/11" (280 mm) Diameter Load Capacity: Cat. No. VLGG109AC: 1200 Lbs. (545 kg) Cat. No. VLGG1011LAC: 1800 Lbs. (815 kg) Unit Weight: Cat. No. VLGG109AC: 184 Lbs. (84 kg) Cat. No. VLGG1011LAC: 190 Lbs. (87 kg) Standard Operating Power: 120V AC, 50/60 Hertz, 6 AMP (240V AC, 50/60 Hertz, 3 AMP also available) Apply/Release: Cat. No. VLGG109AC: 4 sec./4 sec. (approx) Cat. No. VLGG1011LAC: 6 sec./4 sec. (approx) Load Movement: Upright to Upright Standard Features: Green Lift Light Operator Protection Mesh Removable Control Pendant Nylon Slings Vacuum Gauge Vacuum Reserve Tank Vacuum Line Filter Spring-Mounted Pads Twist-Lock Electrical Plug Blow-off for Quick Release Alternative Power Systems DC Power System CAT. NO. VLGG109DC CAT. NO. VLGG1011LDC Air (Venturi) Power System CAT. NO. VLGG109A1RS CAT. NO. VLGG1011LA1RS Available Options: <li>Vacuum Loss Warning Buzzer CAT. NO. E03VLW </li><li>12V/DC Vacuum Back-up System CAT. NO. E01DCB </li><li>Individual Pad Shutoffs CAT. NO. CM1C0WB </li><li>Voltage Adaptation CAT. NO. E06VA Most shipping weights are approximate and have not been verified. If the exact weight is needed in order to determine shipping costs, and shipping costs are required in order for you to complete your order, please request this prior to submitting your order by contacting CRL Customer Service. Product images shown are of the actual product or a close representation. Colors can vary depending on your computer's video card and on how your monitor's color is adjusted.</li>

This CRL Z-Series Square Type Flat Base Glass Clamp is designed to be used on glass 1/2" (12 mm) thickness. Constructed from either zinc or stainless steel, the clamps are the perfect solution for partitions, railings, windbreaks and countless other projects. For securing the Z-Clamp to thin wall tubing ( less than 1/8"), use CRL's ZBOLT Socket Head Cap Bolt and ZRNUT Rivet Nut. For installation, drill 17/32 (13.5 mm) hole, then install the Rivet-Nut using 34604 Heavy-Duty Thread Insert tool and 34618 5/16" Mandrel and Nosepiece. NOTE: 9/16" (14.3 mm) hole is required if using the steel pin (included with the clamp) for additional glass support. SPECIFICATIONS Glass Thickness: For 1/2" (12 mm). Base Design: Flat For Use With: Square Tubing or Other Flat Surfaces Material: Choice of Zinc Constructed or Stainless Steel or Powder Painted Zinc Clamps are recommended for more durability in exterior applications. Glass Fabrication: For 1/4" (6 mm), 5/16" (8 mm), and 3/8" (10 mm) Thick Glass: 1/2" (12mm) diameter hole required if using provided steel pin for glass support. For 1/2" (12 mm) Thick Glass: 9/16" (14 mm) diameter hole required if using provide steel pin for glass support. Includes: Rubber Gaskets and Steel Pin (for optional use) with Grommet Replacement Hardware: CRL P612 for Replacement Screws Product Warning: For interior CRL recommends pinning each glass panel as required when the glass is not supported from the bottom edge to prevent glass panel slippage. Rubber gaskets and steel pins are provided with each clamp. .

This aluminum CRL Latch and Pull is designed to fit CRL's KDEX134 Series Screen Door frames with a mortise installation. It is non-handed and contains an internal latch assembly. One inside and outside pull, diecast internal latch assembly, thumb turn, strike and installation screws per package. .

This CRL Extended Arm Adjustment Rod provides an extension for the adjustable arm portion of the old style DCPHOA Posi-Hold Type Hold Open Arm with the round barrel threaded arm. This extension arm will not work with the new adjustable link flat arm. .

This CRL K.D. Sliding Screen Door Kit has 2" (51 mm) wide extruded door frame members with a .043" (1.1 mm) wall thickness. This kit comes with pre-mitered top and bottom rails with the roller and corner pre-installed. The width of this door cannot be changed. Kit comes complete with 1-3/8" (35.2 mm) diameter steel ball bearing rollers which attach quickly to the glass filled nylon corners. The roller adjustment screw is hidden on the edge of the door. Door supplied with a universal style plastic pull handle with a steel latch hook which locks into the included diecast keeper. A vinyl bug strip is provided. The recommended retainer spline size is .135", and you can use either vinyl or foam core type spline to secure the screen mesh (not included). Product Warning: This new kit has top and bottom rails 1/2" (12.7 mm) longer than the standard door width (a 36" door will measure 36-1/2" wide). Also, the door roller slot has been widened to be adjusted from 36-1/2" to 35-1/2". It is important to remember that both ends of the door rails should be cut no more than 1/2". .

This CRL Stainless Steel Strike Plate is used with our S0H334 Series Handles. .

This diecast CRL Louver Window Operator has a 4" (102 mm) link arm. The non-handed operator has a center position T-Crank handle and fits on windows by Superior. Each package contains one operator with handle. Complete with a T-Crank handle. .

This gray CRL Glazing Vinyl is 100% extruded virgin vinyl used to repair, re-glaze or manufacture windows. The channel depth of the vinyl is 9/16" (14.3 mm) and it requires a metal opening of 11/32" (8.7 mm). Available in two size rolls: <li><a href="/search?keyword=GC722M">1,000' (305 m)</a> </li><li><a href="/search?keyword=GC722C">100' (30.5 m)</a> .</li>

This is a replacement part for PR70 Series Surface Mounted Door Closers. For push side parallel arm installation when mounting surface height is less than 4-3/4" (121 mm). .

This is our most popular circle cutter, made from the highest quality materials. The CRL Precision Circle Cutter features a 2-3/8" (60 mm) vacuum cup that holds steady while you are scoring. There are cross lines so you can accurately position the tool on a predetermined center. A ball handle allows for a smooth cutting motion for the duration of your cut. The machined brass extension bar is scaled in inches and millimeters. This unit is supplied with a replaceable Six Wheel Cutting Turret. NOTE: There are three available options for Replacement Vacuum Cup and Trigger. Each option has a different stem length. Dimension from the Pad to the tip of the Stem will define correct replacement part number: Cat. No. 519 = 2-21/64" (59 mm) Cat. No. 5195 = 1-53/64" (46 mm) Cat. No. 5195X = 1-5/8" (41 mm) .

This replacement key is for our 981 CRL Chrome Track Plunger Lock which installs easily in track assemblies with sliding glass doors. You can install it in either the top or bottom of the door. The spring-activated design permits locking simply by pushing the plunger without the key. Comes with ferrule and two keys. If the 981 is used with Cat. No.'s D610, D5610 or MC610 'H' Bar, the glass will require notching. If the LK610 'H' Bar is used, no notching of the glass is required. .

This unique CRL Cam Handle has an attached nylon wedge flap which eliminates the need for a separate strike. When the handle is rotated into the lock position, the wedge flap tightens the window against the frame. The handle has 1-1/2" (38 mm) on-center screw hole spacing, and is made of pressure diecast zinc alloy with a 1/16" (1.5 mm) step. .

Use CRL Riv-Nuts attach to Cat. Nos. 3STA112 or 3STA2 Standoff Tube Adaptors, 1-1/2" (38 mm) and 2" (51 mm) diameter tubing. Grip Range, .027" to .165" Material Thickness. NOTE: Installs with Catalog Number 34604 Heavy-Duty Thread Setter Tool. .

Use the CRL Magnetic Tape to hold metal signs or placards; to hold steel frame storm window panels; to trap metal particles near sensitive equipment. It has adhesive on one side that will adhere to virtually any clean, dry, smooth surface. Just cut to length, peel liner, and stick in place. NOTES: indoor-type rubber adhesive with a 9.4 lbs. force. .

When demanding closer specs are required, consider our PR40 Series Surface Mounted Door Closers. Recommended for high traffic areas, such as public buildings, airports, and shopping centers. Closing and latching speed controls are independently adjustable, and adjustable backcheck is a standard feature to prevent damage to the closer, door, and adjacent surface should the door be violently swung open due to wind or heavy pedestrian traffic. The optional delayed action feature adjusts the time a door will remain open to facilitate ease of progress through the opening. This feature is particularly valuable in health care facilities, such as hospitals, nursing homes, and public buildings that require door closers to delay closing to comply with A.D.A. regulations. PR40 Series Closers have a compact design closer body and share a common 9-1/16" x 3/4" (230 x 19 mm) mounting hole template, making it ideal for both new and retrofit applications. All PR40 Closers are UL Listed and warranted for ten years. Parallel Arm Brackets and mounting hardware is included with each closer permitting universal application for regular, top jamb or parallel arm applications. Optional accessories, such as Drop Plates and Hold Open Arms, are available for special installations. Product Warning: Closers set to comply with A.D.A. specified opening forces might not provide adequate spring power to control and close the door due to varying site conditions and door size. DC5CVR Covers will work with the PR42, it isnt a replacement cover, it is a cover that can be used with this closer, by adhering it to the closer using double sided tape. .

Working with UV adhesives requires precise control of the volume used for each application. CRL's choice of eight different orifice diameters will help you select just the right size Dispensing Needle for the job. Cat. No. UVA1 Needle Adapters fit all our standard size bottles (except 1 liter). Bottle caps stay clean and may be re-used to seal the bottle for storage. Use Cat. No. UV100G Empty Bottle when buying bulk size 1000g bottles for easier handling and dispensing. .

You can get a perfect diamond ground finish in a wide range of sizes and shapes using our CRL Diamond Router Bit. The 1/4" (6.4 mm) shank fits perfectly in our router systems and others that have matching fractional collets. <a href="/search?keyword=DTC80GL">CRL Diamond coolant</a> should be used and directed at the contact point of inward rotation of the glass and diamond router bit. Ideal operating speed is 8,000 RPM. 2-1/4" (57.2 mm) overall length. Product Warning: Diamond Glass Routing is a high speed operation that requires the proper equipment designed for this use only. Always wear the proper safety gear including protective eyewear when routing. Wet working tools should always be used with a ground fault circuit interrupter such as the CRL GF1. Failure to follow these and any other recommended precautions can result in injury. .

Cottage Series DK Sliders utilize metal side jambs for a traditional frameless sliding shower door appearance. Bolt-Through Top Hangers allow immediate fabrication and installation, with no waiting for messy adhesive to dry. Our DK Series Kits come in Brite Anodized, Brite Gold Anodized, Brushed Nickel, and Oil Rubbed Bronze finishes, with other finishes available on special order. The top hung stock units include: Extruded Aluminum Header, Side Jambs, and Bottom Sill; Top Hangers for 3/8" (10 mm) glass, Back-to-Back Knob, 24" (610 mm) Towel Bar, Nylon Rollers, Bottom Guide, Screws, and Bumpers. Tempered glass and silicone sealant are supplied by the installer to complete the installation. Since all rollers are overhead, the Bottom Sill and Side Jambs are uncluttered, making cleaning easy. Available in up to six stock sizes. Extrusions, Bottom Guides, Hardware Packages, plus other accessories may be ordered separately. Custom Kits are available in multiple configurations and are cut-to-size for easy field installation, <a href="/contactus?site=US">click here</a> to inquire about custom sizes. SPECIFICATIONS: Materials: <li>Extrusions (Aluminum) </li><li>Towel Bar (Brass Tubing) </li><li>Knob (Solid Brass) Glass Thickness: </li><li>3/8" (10 mm) (Glass not included in Kit) Glass Fabrication: Towel Bar ? Two 1/2" (12 mm) Diameter Holes, 24" (610 mm) Center-to-Center; Knob ? One 1/2" (12 mm) Diameter Hole; Top Hangers ? Four 1/2" (12 mm) Diameter Holes (two per glass panel) .</li>

CRL 1.9" Diameter Plate can be attached to the wall or to a 1.9" (48.3 mm) diameter post if used with <a href="/search?keyword=GH037LBS">Wall-to-Glass Hinges</a>. .Stainless Steel Advisory: Although Stainless Steel is resistant to corrosion, it is not rust or stain proof. CRL recommends periodic maintenance to help maintain its factory finish. For more information, view the Stainless Steel Disclaimer found in the Technical References section below.

CRL 100 Series 90? Fascia Mount Post Kits come complete with a Post that has an additional 11" (279.4 mm) in length, Fascia Bracket (FB9), Bottom Fascia Plate Base Plate Screws (BPS112), Stainless Steel Washers (WSHR1), Bolt Cover Buttons (BTN1), and Post Cap (PC1). Lag Bolts or Anchors for mounting to the substrate. Fascia Posts Kits are available in your choice of three heights and several attractive colors. Custom heights and colors are also available. Product Warning: All ARS/AWS products are painted to order and are non-refundable or returnable. .

CRL 135 Degree Angles easily slip into our HRH15 Hand Rail Tubing using our HRH15CSS connector sleeve. Use of our Cat. No. 32629 Metal Contact Cement is required to achieve a secure and permanent bond. .Stainless Steel Advisory: Although Stainless Steel is resistant to corrosion, it is not rust or stain proof. CRL recommends periodic maintenance to help maintain its factory finish. For more information, view the Stainless Steel Disclaimer found in the Technical References section below.