Attribute08: Carbide

Products with this attribute (420 total)

Corner Chamfer End Mill, 16.00 mm Milling Dia., Carbide, Straight, Metric, 0.30 mm, 75.00 mm
Corner Chamfer End Mill, 16.00 mm Milling Dia., Carbide, Straight, Metric, 90 Degrees , 0.30 mm, 32.00 mm
Corner Chamfer End Mill, 20.00 mm Milling Dia., Carbide, Straight, Metric, 0.50 mm, 38.00 mm
Corner Chamfer End Mill, 4.00 mm Milling Dia., Carbide, Straight, Metric, 0.10 mm, 11.00 mm
Corner Chamfer End Mill, 4.00 mm Milling Dia., Carbide, Straight, Metric, 90 Degrees , 0.10 mm, 11.00 mm
Corner Chamfer End Mill, 4.50 mm Milling Dia., Carbide, Straight, Metric, 0.10 mm, 14.00 mm
Corner Chamfer End Mill, 5/8 in Milling Dia., Carbide, TiAlN, Non-Coolant Through, Weldon Flat, Fractional Inch, 0.0200 in, 3/4 in
Corner Chamfer End Mill, 7.00 mm Milling Dia., Carbide, Straight, Metric, 0.10 mm, 20.00 mm
Corner Chamfer End Mill, 7.00 mm Milling Dia., Carbide, Weldon Flat, Metric, 0.40 mm, 16.00 mm
Corner Chamfer End Mill, 8.00 mm Milling Dia., Carbide, Straight, Metric, 0.40 mm, 16.00 mm
Corner Chamfer End Mill, 9.00 mm Milling Dia., Carbide, Straight, Metric, 0.20 mm, 16.00 mm
Corner Chamfer End Mill,8.00mm,Carbide
Corner Radius End Mill, 0.187" Shank dia.
Corner Radius End Mill, 0.250" Shank dia.
Corner Radius End Mill, 0.750" Shank dia.
Corner Radius End Mill, 1 in Milling Dia., Carbide, TiAlN, Non-Coolant Through, Weldon Flat, Fractional Inch, 0.03 in, 2 1/4 in, 5 in
Corner Radius End Mill, 1/2 in Milling Dia., Carbide, AlTiN, Non-Coolant Through, Weldon Flat, Fractional Inch, 0.03 in, 1 1/4 in, 4 in
Corner Radius End Mill, 1/2 in Milling Dia., Carbide, Non-Coolant Through, Straight, Fractional Inch, 0.06 in, 1 1/2 in, 4 in
Corner Radius End Mill, 1/2 in Milling Dia., Carbide, Non-Coolant Through, Straight, Fractional Inch, 0.06 in, 1 1/4 in, 3 in
Corner Radius End Mill, 1/4 in Milling Dia., Carbide, AlTiN, Straight, Fractional Inch, 0.03 in, 3/4 in, 2 1/2 in
Corner Radius End Mill, 10.00 mm Milling Dia., Carbide, Non-Coolant Through, Straight, Metric, 0.30mm, 22.00 mm, 72.00 mm
Corner Radius End Mill, 12.00 mm Milling Dia., Carbide, Non-Coolant Through, Straight, Metric, 2.00mm, 18.00 mm, 125.00 mm
Corner Radius End Mill, 3.80mm Milling Dia., Carbide, TiAlN, Metric, 0.08mm, 4.00mm, 54.00mm
Corner Radius End Mill, 3/4 in Milling Dia., Carbide, AlTiN, Non-Coolant Through, Weldon Flat, Fractional Inch, 0.06 in, 1 1/2 in, 5 1/2 in
Corner Radius End Mill, 3/8 in Milling Dia., Carbide, TiAlN, Non-Coolant Through, Straight, Fractional Inch, 0.03 in, 2 1/2 in, 4 in
Corner Radius End Mill, 4.00mm Milling Dia., Carbide, TiAlN, Metric, 0.50mm, 11.00mm, 57.00mm
Corner Radius End Mill, 5.00 mm Milling Dia., Carbide, Non-Coolant Through, Straight, Metric, 0.25mm, 7.50 mm, 76.00 mm
Corner Radius End Mill, 5.75 mm Milling Dia., Carbide, TiAlN, Metric, 0.16mm, 6.00 mm, 54.00 mm
Corner Radius End Mill, 5.75mm Milling Dia., Carbide, TiAlN, Metric, 0.16mm, 6.00mm, 54.00mm
Corner Radius End Mill, 5/8 in Milling Dia., Carbide, AlTiN, Non-Coolant Through, Straight, Fractional Inch, 0.015 in, 15/16 in, 5 31/32 in
Corner Radius End Mill, 5/8 in Milling Dia., Carbide, AlTiN, Non-Coolant Through, Weldon Flat, Fractional Inch, 0.03 in, 3 1/8 in, 5 1/2 in
Corner Radius End Mill, 8.00 mm Milling Dia., Carbide, Non-Coolant Through, Weldon Flat, Metric, 0.45mm, 16.00 mm, 63.00 mm
Corner Radius End Mill, Carbide, 3.000" L
Corner Radius End Mill, nACo, 2.500" L
COUNTERSINK 2-7/8 IN. L 82 DEG. 5/8 IN.
DeWALT? DW5437B25 Hammer Drill Bit Hanes Supply, Inc
Diamond Turning Insert, Diamond, 1/2 in, DNMG, 55 Degrees, 1/32 in, Carbide
DK01001ZO Jabil Inc. | Prototyping, Fabrication Products | DigiKey
DK01003JS Jabil Inc. | Prototyping, Fabrication Products | DigiKey
DK03017JS Jabil Inc. | Prototyping, Fabrication Products | DigiKey
DK06034JS Jabil Inc. | Prototyping, Fabrication Products | DigiKey
DK20004JS Jabil Inc. | Prototyping, Fabrication Products | DigiKey
Dorian
Drill Mill, Carbide, AlTiN, 12.000 mm Milling Dia., 120 Degrees
Drill Mill, Carbide, Bright (Uncoated), 10.000 mm Milling Dia., 90 Degrees
Drill Mill, Carbide, Bright (Uncoated), 5/16 in Milling Dia., 90 Degrees
Drill Mill, Carbide, Bright (Uncoated), 6.000 mm Milling Dia., 90 Degrees
DW5222B25 3/16X3 PERCUSSION DRL BIT from IRWIN INDUSTRIAL TOOL COMPANY
DW5223B25 3/16X6 PERCUSSION DRL BIT from IRWIN INDUSTRIAL TOOL COMPANY
END MILL SET,1/8
End Mill, 3.00mm Milling Dia., 40
End Mill, AlTiN, 0.625" Shank dia., Carbide
End Mill, ZrN, 0.625" Shank dia., Carbide
End Mill,0.1563 in. Milling Dia.,I4C
End Mill,0.2500 in. Milling Dia.,4K03
End Mill,0.7500 in. Milling Dia.,4K02
End Mill,1 in.2 Flutes,TiN
End Mill,1 in.4 Flutes,TiN
End Mill,1.50mm2 Flutes,TiN
End Mill,1/16 in.2 Flutes,TiCN
End Mill,1/32 in.2 Flutes,TiCN
End Mill,1/32 in.4 Flutes,TiN
End Mill,1/4 in.2 Flutes,TiN
End Mill,1/4 in.4 Flutes,AlTiN
End Mill,1/4 in.4 Flutes,TiCN
End Mill,1/8 in.3 Flutes,TiCN
End Mill,1/8 in.4 Flutes,Bright
End Mill,11/16 in.4 Flutes,TiN
End Mill,13/64 in.4 Flutes,TiN
End Mill,14.00mm Milling Dia.,DQ13
End Mill,15/64 in.2 Flutes,TiN
End Mill,15/64 in.4 Flutes,TiCN
End Mill,3.00mm Milling Dia.,J111
End Mill,3/32 in.3 Flutes,TiCN
End Mill,3/4 in.4 Flutes,TiCN
End Mill,3/4 in.4 Flutes,TiN
End Mill,3/64 in.2 Flutes,TiN
End Mill,3/8 in.2 Flutes,TiN
End Mill,3/8 in.4 Flutes,TiCN
End Mill,3/8 in.4 Flutes,TiN
End Mill,4.50mm2 Flutes,TiN
End Mill,5/32 in.2 Flutes,TiCN
End Mill,5/32 in.4 Flutes,TiN
End Mill,5/8 in.4 Flutes,TiN
End Mill,5/8 in.4 Flutes,TiN
End Mill,7/16 in.2 Flutes,TiCN
End Mill,7/16 in.4 Flutes,TiCN
End Mill,7/16 in.4 Flutes,TiN
End Mill,7/64 in.2 Flutes,TiCN
End Mill,7/64 in.3 Flutes,TiCN
End Mill,9.00mm Milling Dia.,D003/D013
End Mill,9/32 in.3 Flutes,TiN
End Mill,9/64 in.4 Flutes,TiCN
End Mill,AlTiN,0.3750 in Millng Dia,4V05
End Mill,AlTiN,1.0000 in Millng Dia,4M0R
End Mill,AlTiN,1.0000 in Millng Dia,4S0R
End Mill,Roughing,Ch 5/8
End Mill,TiAlN,0.5000 in. Milling Dia.
End Mill,TiAlN,0.5000 in. Milling Dia.
End Mill,TiAlN,0.5000 in. Milling Dia.