Attribute08: Carbide

Products with this attribute (420 total)

Solid Carbide Thread Mill, 9/16"-24 UN, Straight, 4 Flutes, Finish: TiAlN

Solid Carbide Thread Mill, 9/16"-27 UN, Straight, 4 Flutes, Pitch: 27

Solid Carbide Thread Mill, M12 x 1.0 ISO, Straight, 4 Flutes, Finish: TiN

Solid Carbide Thread Mill, M14 x 1.0 ISO, Straight, 4 Flutes, Pitch: 1

Solid Carbide Thread Mill, M18 x 2.5 ISO, Straight, 4 Flutes, Finish: TiN

Split End Blank,Unfinished,Overall 3"L

Split End Blank,Unfinished,Overall 4" L

Square End Mill, 0.0468" Milling dia.

Square End Mill, 0.0650" Milling dia.

Square End Mill, 1/2 in Milling Dia., ZrN, Straight, Length of Cut 5/8 in, Overall Length 3 in, Shank Dia. 1/2 in

Square End Mill, 1/8 in Milling Dia., Carbide, TiAlN, Straight, Length of Cut 3/16 in, Overall Length 3 in, Shank Dia. 1/4 in, Neck Dia. 7/64 in

Square End Mill, 12.00 mm Milling Dia., Carbide, Bright (Uncoated), Straight, Length of Cut 22.00 mm, Overall Length 130.00 mm, Shank Dia. 12.00 mm, Neck Dia. 11.500 mm

Square End Mill, 5.00 mm Milling Dia., Carbide, Bright (Uncoated), Straight, Length of Cut 10.00 mm, Overall Length 100.00 mm, Shank Dia. 6.00 mm, Neck Dia. 4.500 mm

Square End Mill, 5/16 in Milling Dia., ZrN, Straight, Length of Cut 27/64 in, Overall Length 2 1/2 in, Shank Dia. 19/64 in

Square End Mill, 6.00 mm Milling Dia., Carbide, Bright (Uncoated), Straight, Length of Cut 12.00 mm, Overall Length 100.00 mm, Shank Dia. 6.00 mm, Neck Dia. 5.500 mm

Square End Mill,5/8" Cut Length,nACRo

Thread Mill, 10.00mm Shank Dia., 4 Flutes

Thread Mill, Coated, M10x0, 5

Thread Mill, M1.1x0.25 Size, Uncoated

TOL-14817 SparkFun Electronics | Prototyping, Fabrication Products | DigiKey

TOL-14850 SparkFun Electronics | Prototyping, Fabrication Products | DigiKey

TOL-14853 SparkFun Electronics | Prototyping, Fabrication Products | DigiKey

Trigon Milling Insert, Inscribed Circle 0.5510 in, Rake -3 Degrees to -8 Degrees Radial;8 Degrees Axial

Turning Insert, Inscribed Circle 0.625 in