AttributeKey05: Milling Dia.

Products with this attribute (311 total)

0.0600" Cutter DIA x 0.005" Radius x 0.090" Length of Cut x 0.500" (1/2) Reach Carbide Corner Radius End Mill for Steels and High Temperature Alloys, 3 Flutes
18.000 mm Cutter DIA x 45.00 mm Length of Cut Carbide Square End Mill for Aluminum Alloys, 3 Flutes, ZrN Coated
18.000 mm Cutter DIA x 45.00 mm Length of Cut Carbide Square End Mill for Steels and High Temperature Alloys, 5 Flutes
Ball End Mill, 1/2 in Milling Dia., Carbide, Bright (Uncoated), Non-Coolant Through
Ball End Mill, 1/2 in Milling Dia., Carbide, Non-Coolant Through
Ball End Mill, 10 mm Milling Dia., Carbide, Non-Coolant Through
Ball End Mill, 14 mm Milling Dia., Carbide, Non-Coolant Through
Ball End Mill, 17/64 in Milling Dia., Carbide, TiN, Non-Coolant Through
Ball End Mill, 2 mm Milling Dia., Carbide, Non-Coolant Through
Ball End Mill, 3/16 in Milling Dia., Carbide, Non-Coolant Through
Ball End Mill, 3/4 in Milling Dia., Carbide, Bright (Uncoated), Non-Coolant Through
Ball End Mill, 3/4" Dia, Carbide
Ball End Mill, 4.00mm Dia, Carbide
Ball End Mill, 6 mm Milling Dia., Carbide, Bright (Uncoated), Non-Coolant Through
Ball End Mill, AlTiN, 0.187" Shank dia.
Ball End Mill, Carbide, 0.0250"Milling dia
Ball End Mill, Carbide, 0.0350"Milling dia
Ball End Mill, Carbide, 0.0468"Milling dia
Ball End Mill, Carbide, 0.0468"Milling dia
Ball End Mill, Carbide, 0.0781"Milling dia
Ball End Mill, Carbide, 0.1000"Milling dia
Ball End Mill, Carbide, 0.1875"Milling dia
Ball End Mill, Carbide, 0.40mm Milling dia
Ball End Mill, Carbide, 1.40mm Milling dia
Ball End Mill,nACo,0.250" Shank dia.
Ball End Mill,ZrN,0.500" Shank dia.
Carbide End Mill, 2-1/2 in,CEM1764B2
Carbide End Mill, Dia 8mm, Cut L 22mm
Carbide End Mill,1/2In,2FL,Double
Carbide End Mill,1/2In,4FL,Single,6In
Carbide End Mill,1/4In,4FL,Double
Carbide End Mill,1/4In,4FL,Single,6In
Carbide End Mill,1/8in dia,0.2250in Cut
Carbide End Mill,1/8In,4FL,Single,3In
Carbide End Mill,1In,4FL,Single,6In
Carbide End Mill,3/32In,2FL,Double
Carbide End Mill,4.0mm,4FL,Single
Carbide End Mill,4in,CEM38BXL4TICN
Carbide End Mill,5/16in dia,13/16in Cut
Carbide End Mill,5/16In,2FL,Single,2-1/2
Carbide End Mill,5/16In,2FL,Single,2-1/2
Carbide End Mill,5/64In,4FL,Single
Carbide End Mill,7.0mm,2FL,Single,63.0mm
Carbide End Mill,7/16In,2FL,Single,6In
Carbide End Mill,7/32In,2FL,Double,3-1/2
Carbide End Mill,7/64In,2FL,Single,1-1/2
Carbide End Mill,9/16In,2FL,Single,3-1/2
Carbide End Mill,Dia 14mm,Cut L 30mm
Chamfer End Mill,1/8 in. Dia,Carbide,209
Chamfer End Mill,3/8 in. Dia,Carbide,209
Cor Rad End Mill,3/4",Carb,0.0300" rad
Cor. Rad. End Mill, 1/64" CR, Carbide
Corner Chamfer End Mill, 1 in Milling Dia., Carbide, TiCN, Non-Coolant Through, Weldon Flat, Fractional Inch, 0.0197 in, 2 1/4 in
Corner Chamfer End Mill, 12.00 mm Milling Dia., Carbide, Straight, Metric, 0.30 mm, 75.00 mm
Corner Chamfer End Mill, 16.00 mm Milling Dia., Carbide, Straight, Metric, 0.30 mm, 75.00 mm
Corner Chamfer End Mill, 16.00 mm Milling Dia., Carbide, Straight, Metric, 90 Degrees , 0.30 mm, 32.00 mm
Corner Chamfer End Mill, 25.00 mm Milling Dia., Cobalt, Non-Coolant Through, Weldon Flat, Metric, 0.0200 in, 45.00 mm
Corner Chamfer End Mill, 3/4 in Milling Dia., Cobalt, Non-Coolant Through, Weldon Flat, Fractional Inch, 0.0140 in, 3 in
Corner Chamfer End Mill, 4.00 mm Milling Dia., Carbide, Straight, Metric, 0.10 mm, 11.00 mm
Corner Chamfer End Mill, 5/8 in Milling Dia., Carbide, TiAlN, Non-Coolant Through, Weldon Flat, Fractional Inch, 0.0200 in, 3/4 in
Corner Chamfer End Mill, 7.00 mm Milling Dia., Carbide, Straight, Metric, 0.10 mm, 20.00 mm
Corner Chamfer End Mill, 9.00 mm Milling Dia., Carbide, Straight, Metric, 0.20 mm, 16.00 mm
Corner Chamfer End Mill,3/8" Shank dia.
Corner Chamfer End Mill,3/8" Shank dia.
Corner Chamfer End Mill,5/8" Shank dia.
Corner Chamfer End Mill,8.00mm,Carbide
Corner Radius End Mill, 1 in Milling Dia., Carbide, Non-Coolant Through, Straight, Fractional Inch, 0.12 in, 1 1/8 in, 7 in
Corner Radius End Mill, 1 in Milling Dia., Carbide, ZrN, Straight, Fractional Inch, 0.06 in, 2 in, 8 in
Corner Radius End Mill, 1.00 mm Milling Dia., Carbide, AlTiN, Straight, Metric, 0.10mm, 1.00 mm, 57.00 mm
Corner Radius End Mill, 1/2 in Milling Dia., Carbide, ZrN, Straight, Fractional Inch, 0.03 in, 1 in, 3 in
Corner Radius End Mill, 1/8 in Milling Dia., Carbide, Bright (Uncoated), Straight, Fractional Inch, 0.015 in, 1/2 in, 1 1/2 in
Corner Radius End Mill, 10.00 mm Milling Dia., Carbide, Non-Coolant Through, Straight, Metric, 0.30mm, 22.00 mm, 72.00 mm
Corner Radius End Mill, 12.00mm Milling Dia., Carbide, TiAlN, Metric, 0.1200 in, 31/64 in, 3 61/64 in
Corner Radius End Mill, 20.00 mm Milling Dia., Carbide, AlTiN, Non-Coolant Through, Straight, Metric, 0.50mm, 38.00 mm, 115.00 mm
Corner Radius End Mill, 20.00mm Milling Dia., Carbide, Bright (Uncoated), Metric, 0.1200 in, 25/32 in, 140.00mm
Corner Radius End Mill, 20.00mm Milling Dia., Carbide, Bright (Uncoated), Metric, 0.1600 in, 25/32 in, 130.00mm
Corner Radius End Mill, 3.00 mm Milling Dia., Carbide, Non-Coolant Through, Weldon Flat, Metric, 0.25mm, 4.00 mm, 50.00 mm
Corner Radius End Mill, 3/4 in Milling Dia., Carbide, AlTiN, Non-Coolant Through, Straight, Fractional Inch, 0.06 in, 1 1/2 in, 6 in
Corner Radius End Mill, 3/8 in Milling Dia., Carbide, AlTiN, Non-Coolant Through, Straight, Fractional Inch, 0.03 in, 7/8 in, 2 1/2 in
Corner Radius End Mill, 3/8 in Milling Dia., Carbide, Non-Coolant Through, Straight, Fractional Inch, 0.06 in, 3/4 in, 2 1/2 in
Corner Radius End Mill, 3/8 in Milling Dia., Carbide, TiAlN, Non-Coolant Through, Straight, Fractional Inch, 0.03 in, 2 1/2 in, 4 in
Corner Radius End Mill, 5.00 mm Milling Dia., Carbide, Non-Coolant Through, Straight, Metric, 0.25mm, 7.50 mm, 76.00 mm
Corner Radius End Mill,0.187" Shank dia.
Corner Radius End Mill,0.312" Shank dia.
Corner Radius End Mill,0.500" Shank dia.
Corner Radius End Mill,0.500" Shank dia.
Corner Radius End Mill,0.500" Shank dia.
Corner Radius End Mill,0.625" Shank dia.
Corner Radius End Mill,1.000" Shank dia.
Corner Radius End Mill,nACo,2.000" L
Corner Radius End Mill,nACo,3.000" L
Corner Radius End Mill,nACo,4.000" L
Corner Radius End Mill,Uncoated,2.5" L
Corner Radius End Mill,WS15PE Grade
Corner Radius End Mill,WS15PE Grade
Corner Radius End Mill,WS15PE Grade
Corner Radius End Mill,WS15PE Grade
Drill/End Mill, 2 & 4 Flute, 0.4375" (7/16) Cutter dia, Length of Cut: 1"
End Mill, 4 Flute, Corner Radius,16.0 mm Cutter dia
End Mill, TiCN, 0.6250 in Milling Dia, 6205