AttributeKey05: Milling Dia.

Products with this attribute (311 total)

Melin Tool Company

SC End Mill, 7/64in.dia., 2-1/2in. L.

Sq. End Mill,Single End,Carb,10.00mm

Sq. End Mill,Single End,Carb,10.00mm

Sq. End Mill,Single End,Carb,6.50mm

Sq. End Mill,Single End,Carb,9.00mm

Square End Mill, 0.0937" Milling dia.

Square End Mill, 0.1875" Milling dia.

Square End Mill, 0.60 mm Milling Dia., Carbide, Bright (Uncoated), Straight, Length of Cut 1.80 mm, Overall Length 38.00 mm, Shank Dia. 3.00 mm

Square End Mill, 1 in Milling Dia., Bright (Uncoated), Straight, Length of Cut 1 1/4 in, Overall Length 1 1/2 in, Shank Dia. 1 in

Square End Mill, 1 in Milling Dia., Carbide, AlTiN, Non-Coolant Through, Weldon Flat, Length of Cut 3 1/4 in, Overall Length 6 in, Shank Dia. 1 in

Square End Mill, 1 in Milling Dia., Carbide, Bright (Uncoated), Non-Coolant Through, Straight, Length of Cut 1 1/8 in, Overall Length 7 in, Shank Dia. 1 in

Square End Mill, 1.00 mm Milling Dia., Carbide, TiAlN, Non-Coolant Through, Straight, Length of Cut 1.50 mm, Overall Length 60.00 mm, Shank Dia. 6.00 mm

Square End Mill, 1/2 in Milling Dia., Carbide, Bright (Uncoated), Non-Coolant Through, Straight, Length of Cut 5/8 in, Overall Length 3 in, Shank Dia. 1/2 in

Square End Mill, 1/2 in Milling Dia., Carbide, nACRo, Weldon Flat, Length of Cut 1 3/4 in, Overall Length 4 1/2 in, Shank Dia. 1/2 in

Square End Mill, 1/2 in Milling Dia., Carbide, nACRo, Weldon Flat, Length of Cut 1 in, Overall Length 3 in, Shank Dia. 1/2 in

Square End Mill, 1/2 in Milling Dia., ZrN, Straight, Length of Cut 5/8 in, Overall Length 3 in, Shank Dia. 1/2 in

Square End Mill, 1/64 in Milling Dia., Carbide, AlTiN, Straight, Length of Cut 1/32 in, Overall Length 1 1/2 in, Shank Dia. 1/8 in

Square End Mill, 1/64 in Milling Dia., Carbide, Bright (Uncoated), Straight, Length of Cut 1/16 in, Overall Length 1 1/2 in, Shank Dia. 1/8 in

Square End Mill, 10.00 mm Milling Dia., Carbide, AlTiN, Straight, Length of Cut 22.00 mm, Overall Length 72.00 mm, Shank Dia. 10.00 mm

Square End Mill, 16.00 mm Milling Dia., Carbide, AlTiN, Non-Coolant Through, Straight, Length of Cut 32.00 mm, Overall Length 100.00 mm, Shank Dia. 16.00 mm

Square End Mill, 16.00 mm Milling Dia., Carbide, Bright (Uncoated), Straight, Length of Cut 35.00 mm, Overall Length 92.00 mm, Shank Dia. 16.00 mm

Square End Mill, 20.00 mm Milling Dia., Carbide, Bright (Uncoated), Non-Coolant Through, Straight, Length of Cut 38.00 mm, Overall Length 104.00 mm, Shank Dia. 20.00 mm

Square End Mill, 3/16 in Milling Dia., Carbide, Bright (Uncoated), Straight, Length of Cut 3/8 in, Overall Length 3 in, Shank Dia. 3/16 in, Neck Dia. 5/32 in

Square End Mill, 3/4 in Milling Dia., Carbide, TAZ, Straight, Length of Cut 1 37/64 in, Overall Length 4 in, Shank Dia. 3/4 in, Neck Dia. Not Applicable

Square End Mill, 3/4 in Milling Dia., Carbide, TiAlN, Non-Coolant Through, Weldon Flat, Length of Cut 2 1/4 in, Overall Length 5 in, Shank Dia. 3/4 in

Square End Mill, 3/4 in Milling Dia., Carbide, ZrN, Straight, Length of Cut 1 1/2 in, Overall Length 4 in, Shank Dia. 3/4 in

Square End Mill, 5.00 mm Milling Dia., Altima, Straight, Length of Cut 13.00 mm, Overall Length 57.00 mm, Shank Dia. 6.00 mm

Square End Mill, 5.00 mm Milling Dia., Carbide, Bright (Uncoated), Straight, Length of Cut 10.00 mm, Overall Length 57.00 mm, Shank Dia. 6.00 mm

Square End Mill, 5/32 in Milling Dia., Carbide, Bright (Uncoated), Straight, Length of Cut 9/16 in, Overall Length 2 in, Shank Dia. 3/16 in

Square End Mill, 5/64 in Milling Dia., Carbide, AlTiN, Straight, Length of Cut 5/32 in, Overall Length 1 1/2 in, Shank Dia. 1/8 in

Square End Mill, 6.00 mm Milling Dia., Carbide, Bright (Uncoated), Straight, Length of Cut 12.00 mm, Overall Length 100.00 mm, Shank Dia. 6.00 mm, Neck Dia. 5.500 mm

Square End Mill, 7/8 in Milling Dia., Carbide, TiAlN, Non-Coolant Through, Weldon Flat, Length of Cut 1 1/2 in, Overall Length 4 in, Shank Dia. 7/8 in

Square End Mill, 8.00 mm Milling Dia., Carbide, TiAlN, Non-Coolant Through, Weldon Flat, Length of Cut 16.00 mm, Overall Length 63.00 mm, Shank Dia. 8.00 mm

Square End Mill, 9/32 in Milling Dia., Carbide, ZrN, Straight, Length of Cut 3/4 in, Overall Length 2 1/2 in, Shank Dia. 5/16 in

Square End Mill,0.2500" Milling dia.

Square End Mill,5/8" Cut Length,nACRo

Square End Mill,7/64" Cut Length,nACRo

Square End Mill,Unfinished,1.5"L,Carbide

Square End Mill,Unfinished,1.5"L,Carbide

Square End Mill,Unfinished,1.5"L,Carbide

Square End Mill,Unfinished,1.5"L,Carbide

Square End Mill,Unfinished,1.5"L,Carbide

Square End Mill,WS15PE Grade,Carbide