AttributeKey14: Super Alloy (S) Compatibility

Products with this attribute (64 total)

Ball End Mill, 14 mm Milling Dia., Carbide, Non-Coolant Through

Ball End Mill, 2 mm Milling Dia., Carbide, Non-Coolant Through

Ball End Mill, 3/16 in Milling Dia., Carbide, Bright (Uncoated), Non-Coolant Through

Ball End Mill, Carbide, 0.0300"Milling dia

Ball End Mill, Carbide, 0.0400"Milling dia

Ball End Mill, Carbide, 0.0450"Milling dia

Carbide End Mill,9/16in dia,1-1/8in Cut

CBN Turning Insert, 4NCDNGA431-BNC100

Corner Chamfer End Mill, 14.00 mm Milling Dia., Carbide, Straight, Metric, 0.30 mm, 75.00 mm

Corner Chamfer End Mill, 16.00 mm Milling Dia., Carbide, Straight, Metric, 0.30 mm, 75.00 mm

Corner Chamfer End Mill, 16.00 mm Milling Dia., Carbide, Straight, Metric, 90 Degrees , 0.30 mm, 32.00 mm

Corner Chamfer End Mill, 5/8 in Milling Dia., Carbide, TiAlN, Non-Coolant Through, Weldon Flat, Fractional Inch, 0.0200 in, 3/4 in

Corner Chamfer End Mill, K30F-TICN

Corner Radius End Mill, 0.312" Shank dia.

Corner Radius End Mill, 0.375" Shank dia.

Corner Radius End Mill, 0.500" Shank dia.

Corner Radius End Mill, 1/2 in Milling Dia., Carbide, Bright (Uncoated), Straight, Fractional Inch, 0.08 in, 1 1/4 in, 3 in

Corner Radius End Mill, 1/2 in Milling Dia., Carbide, Non-Coolant Through, Straight, Fractional Inch, 0.03 in, 2 in, 4 in

Corner Radius End Mill, 12.00 mm Milling Dia., Carbide, Non-Coolant Through, Straight, Metric, 2.00mm, 18.00 mm, 125.00 mm

Corner Radius End Mill, 5/8 in Milling Dia., Carbide, AlTiN, Non-Coolant Through, Weldon Flat, Fractional Inch, 0.03 in, 3 1/8 in, 5 1/2 in

Corner Radius End Mill, AX, 100.00mm L

Corner Radius End Mill, Carbide, 1.500" L

Corner Radius End Mill, Carbide, 3.000" L

Corner Radius End Mill, Carbide, 3.000" L

Corner Radius End Mill,0.625" Shank dia.

Corner Radius End Mill,0.625" Shank dia.

Corner Radius End Mill,WS15PE Grade

Corner Radius End Mill,WS15PE Grade

End Mill, AlTiN, 0.750" Shank dia., Carbide

End Mill, Uncoated, 0.312" Shank dia.

End Mill, ZrN, 0.750" Shank dia., Carbide

End Mill,0.2500 in. Milling Dia.,5A03

End Mill,0.7500 in. Milling Dia.,4K02

End Mill,13/64 in.4 Flutes,TiN

End Mill,3/4 in.4 Flutes,TiCN

End Mill,3/8 in.4 Flutes,TiCN

End Mill,TiCN,0.5000 in Milling Dia,6208

G.W. Schultz Tool

Milling Insert,ACM300 Grade,Carbide

Square End Mill, 0.0200" Milling dia.

Square End Mill, 0.0250" Milling dia.

Square End Mill, 0.0781" Milling dia.

Square End Mill, 1.00mm Milling dia.

Square End Mill, 1/2 in Milling Dia., ZrN, Straight, Length of Cut 5/8 in, Overall Length 3 in, Shank Dia. 1/2 in

Square End Mill, 8.00 mm Milling Dia., Carbide, AlTiN, Non-Coolant Through, Straight, Length of Cut 19.00 mm, Overall Length 63.00 mm, Shank Dia. 8.00 mm

Triangle Turning Insert, Chip-Breaker Code ESU, Inscribed Circle 3/8 in, Al203+TiCN

Triangle Turning Insert, Inscribed Circle 1/4 in, Bright (Uncoated)

Triangle Turning Insert, Triangle, 3/8 in, TNMG, 0.0156 in, Carbide

Turning Insert, DNMG, Carbide, 432 Size