AttributeKey16: List Number

Products with this attribute (150 total)

#31 Carbide Black/Gold 140 Deg. Jobber Length Drill Bit

#8-32, Plug, UNC, 3 Flutes, Bright

1/2" Three Flute Routing End Mill Ball Nose 4"L

13.50mm HSS 118 Deg. Jobber Length Drill Bit

18.90mm Carbide Black/Gold 140 Deg. Jobber Length Drill Bit

3.50MM COOLANT DRILL 10XD-KTX-XV

4.60MM COOLANT DRILL 10XD-KTX-XV

5/8" Three Flute Routing End Mill Square 3"L

Ball End Mill, 1/32 in Milling Dia., Carbide, Non-Coolant Through

Ball End Mill, 17/64 in Milling Dia., Carbide, TiN, Non-Coolant Through

Ball End Mill, 3/16 in Milling Dia., Carbide, AlTiN, Non-Coolant Through

Ball End Mill, AlTiN, 0.625" Shank dia.

Ball End Mill, Carbide, 0.0100"Milling dia

Ball End Mill, Carbide, 0.0270"Milling dia

Ball End Mill, Carbide, 0.45mm Milling dia

Ball End Mill, Carbide, 4.00mm Milling dia

Ball End Mill,ZrN,0.500" Shank dia.

Ball End Mill,ZrN,0.625" Shank dia.

Carbide Drill, 15.50mm Size, 140 Degrees Point Angle, Solid Carbide, TiAlN Finish, Straight Shank

Carbide End Mill, 2-1/2 in,CEM1764B2

Carbide End Mill, 3-1/2 in,CEM3364B4TICN

Carbide End Mill,1/16In,2FL,Single,1-1/2

Carbide End Mill,1/2In,2FL,Double

Carbide End Mill,11/32In,4F,Single,2-1/2

Carbide End Mill,1In,2FL,Single,4In

Carbide End Mill,27/64In,2F,Single,2-3/4

Carbide End Mill,4in,CEM38BXL4TICN

Carbide End Mill,5/32In,2FL,Single,2In

Carbide End Mill,9/16in dia,1-1/8in Cut

Coolant Fed Drill, 13.2mm, 140, Carbide

Coolant Fed Drill, 4.2mm, 140, Carbide

Coolant Fed Drill, 5.5mm, 140, Carbide

Corner Chamfer End Mill, 20.00 mm Milling Dia., Carbide, Straight, Metric, 0.50 mm, 38.00 mm

Corner Chamfer End Mill,3/8" Shank dia.

Corner Radius End Mill, 0.187" Shank dia.

Corner Radius End Mill, 1/2 in Milling Dia., Carbide, ZrN, Straight, Fractional Inch, 0.03 in, 1 in, 3 in

Corner Radius End Mill, 20.00 mm Milling Dia., Carbide, AlTiN, Non-Coolant Through, Straight, Metric, 0.50mm, 38.00 mm, 115.00 mm

Corner Radius End Mill, 3/8 in Milling Dia., Carbide, AlTiN, Straight, Fractional Inch, 0.03 in, 7/8 in, 2 1/2 in

Corner Radius End Mill, 5.00 mm Milling Dia., Carbide, Non-Coolant Through, Straight, Metric, 0.25mm, 7.50 mm, 76.00 mm

Corner Radius End Mill, 5/16 in Milling Dia., Carbide, AlTiN, Straight, Fractional Inch, 0.01 in, 13/16 in, 2 1/2 in

Corner Radius End Mill, 5/8 in Milling Dia., Carbide, AlTiN, Non-Coolant Through, Weldon Flat, Fractional Inch, 0.03 in, 1 1/4 in, 3 1/2 in

Corner Radius End Mill, Carbide, 1.500" L

Corner Radius End Mill, Carbide, 1.500" L

Corner Radius End Mill, Carbide, 2.000" L

Corner Radius End Mill, Carbide, 2.500" L

Corner Radius End Mill,0.625" Shank dia.

Corner Radius End Mill,WS15PE Grade

Drill Bit 5X,Fractional,3/16in

DRILL GP,HSS,BRIGHT,#52

Drill Mill, Carbide, Bright (Uncoated), 5/16 in Milling Dia., 90 Degrees

DRILLS-AC EXT,HSS,BRIGHT,5/64

End Mill, 3.00mm Milling Dia., 40

End Mill, AlTiN, 0.375" Shank dia., Carbide

End Mill, AlTiN, 0.375" Shank dia., Carbide

END MILL, HSS, 5/16

End Mill, TiCN, 0.7500 in Milling Dia, 6200

End Mill, ZrN, 0.750" Shank dia., Carbide

End Mill,13/64 in.4 Flutes,TiN

End Mill,3.00mm Dia,12.00mm Cut,Carbide

END MILL,4 FLUTES,TIALN

End Mill,5/8 in.4 Flutes,TiN

End Mill,9/64 in.4 Flutes,TiCN

End Mill,nACRo,0.187" Shank dia.,Carbide

END MILLGP,HSS,7/16

EXTRA LONG DRILL BIT, #40 DRILL BIT SIZE, 1

Jobber Drill Bit, 3/4 in., Carbide

Jobber Drill Bit, Metric, 17.50mm Size

Jobber Drill Bit, Metric, 9.50mm Size

Jobber Drill, 103mm, 8.1mm Size, TIALN T14

Jobber Drill, 124mm, 13.5mm Size, TIALN T14

JOBBER LENGTH DRILL BIT, 17.5MM DRILL BIT SIZE, 185MM OVERALL L, CARBIDE

Micro Drill Bit, 0.31mm Bit Size, Uncoated

Micro Drill Bit, 10.70mm Size, Carbide

Micro Drill Bit, 3.10mm Size, Carbide

Micro Drill Bit, Uncoated, 0.50mm Bit Size

Micro Drill Bit, Uncoated, 0.60mm Bit Size

Micro Drill Bit, Uncoated, 1.70mm Bit Size

Micro Drill Bit, Uncoated, 3.35mm Bit Size

Micro Drill, Solid Carbide, Uncoated

Monster Tool Co

Pipe and Conduit Thread Tap, Thread Size 1/4 In.-18, NPT, Overall Length 3 15/16 in, HSS-E, Bright (Uncoated), Right Hand, Thread Length 25/32 in, 75 Percent Thread Drill Size 7/16 in, Number of Flutes 4

Screw Machine Drill Bit, 18.40mm Size, 140 Degrees Point Angle, Solid Carbide, AlCrN Finish

Screw Machine Drill Bit, 4.40 mm Size, 140 Degrees Point Angle, Solid Carbide, AlCrN Finish

Screw Machine Drill Bit, Drill Bit Size 1.77 mm, Drill Bit Point Angle 140 Degrees , High Speed Steel, Non-Coolant Through, Cutting Direction Right Hand, Decimal Equivalent 0.0697

Screw Machine Drill Bit, Drill Bit Size 2.42 mm, Drill Bit Point Angle 130 Degrees , High Speed Steel, Non-Coolant Through, Cutting Direction Right Hand, Decimal Equivalent 0.0953

Single End, Chamfer Mill, 45 Degrees Included Angle, 3/16 in Milling Dia., AlTiN, Fractional Inch

Spiral Point Tap, Thread Size M16x1, Metric Fine, Overall Length 100.00 mm, High Speed Steel, Bright (Uncoated), Right Hand, Thread Length 18.00 mm, Thread Limit 6HX, Class of Fit H3, Number of Flutes 4

Sq. End Mill,Single End,Carb,9.00mm

Square End Mill, 0.0310" Milling dia.

Square End Mill, 0.0625" Milling dia.

Square End Mill, 0.0850" Milling dia.

Square End Mill, 1 in Milling Dia., Bright (Uncoated), Straight, Length of Cut 1 1/4 in, Overall Length 1 1/2 in, Shank Dia. 1 in

Square End Mill, 1/2 in Milling Dia., Carbide, AlTiN, Non-Coolant Through, Straight, Length of Cut 5/8 in, Overall Length 6 in, Shank Dia. 1/2 in

Square End Mill, 1/64 in Milling Dia., Carbide, AlTiN, Straight, Length of Cut 1/32 in, Overall Length 1 1/2 in, Shank Dia. 1/8 in

Square End Mill, 1/64 in Milling Dia., Carbide, Bright (Uncoated), Straight, Length of Cut 1/16 in, Overall Length 1 1/2 in, Shank Dia. 1/8 in