AttributeKey17: Hardened (H) Compatibility

Products with this attribute (71 total)

Ball End Mill, 12 mm Milling Dia., Carbide, Non-Coolant Through

Ball End Mill, 3/4" Dia, Carbide

Ball End Mill, 3/8" Dia, Carbide

Ball End Mill, Carbide, 0.30mm Milling dia

Corner Chamfer End Mill, 12.00 mm Milling Dia., Carbide, Straight, Metric, 0.30 mm, 75.00 mm

Corner Chamfer End Mill, 16.00 mm Milling Dia., Carbide, Straight, Metric, 90 Degrees , 0.30 mm, 32.00 mm

Corner Chamfer End Mill, 4.00 mm Milling Dia., Carbide, Straight, Metric, 90 Degrees , 0.10 mm, 11.00 mm

Corner Radius End Mill, 1/2 in Milling Dia., Carbide, AlTiN, Non-Coolant Through, Weldon Flat, Fractional Inch, 0.03 in, 1 1/4 in, 4 in

Corner Radius End Mill, 1/8 in Milling Dia., Carbide, nACRo, Straight, Fractional Inch, 0.005 in, 1/8 in, 2 in

Corner Radius End Mill, 3/4 in Milling Dia., Carbide, AlTiN, Non-Coolant Through, Weldon Flat, Fractional Inch, 0.06 in, 1 1/2 in, 5 1/2 in

Corner Radius End Mill, 8.00 mm Milling Dia., Carbide, Non-Coolant Through, Weldon Flat, Metric, 0.45mm, 16.00 mm, 63.00 mm

Corner Radius End Mill, AX, 63.50mm L

Corner Radius End Mill, Carbide, 1.500" L

Corner Radius End Mill,0.500" Shank dia.

Corner Radius End Mill,0.625" Shank dia.

Corner Radius End Mill,1.000" Shank dia.

Corner Radius End Mill,nACo,1.500" L

Corner Radius End Mill,nACo,5.000" L

Corner Radius End Mill,WS15PE Grade

Diamond Turning Insert, Chip-Breaker Code 1P, Inscribed Circle 1/4 in, AlTiN, ANSI Code CCGT215051P, Chip-Breaker Style On One Side, Clearance Angle 7 Degrees

Diamond Turning Insert, Chip-Breaker Code EGE, Inscribed Circle 5/8 in, Absotech Platinum, ANSI Code CNMG543EGE, Chip-Breaker Style Double, Clearance Angle 0 Degrees , Coating Process CVD

Diamond Turning Insert, Chip-Breaker Code FV, Inscribed Circle 1/4 in, TiCN, ANSI Code 2NC-DCGT21.50.5FV, Chip-Breaker Style Single, Clearance Angle 7 Degrees

Diamond Turning Insert, Diamond, 3/8 in, CPMT, 80 Degrees, 1/32 in, Carbide

End Mill, 0.6250 in. Milling Dia., 5V0S

End Mill, ZrN, 0.750" Shank dia., Carbide

End Mill,0.6250 in. Milling Dia.,5V0S

End Mill,1.50mm2 Flutes,TiN

End Mill,1/4 in.4 Flutes,TiCN

End Mill,3.00mm Milling Dia.,D000/D010

End Mill,3/4 in.4 Flutes,TiCN

End Mill,5/8 in.4 Flutes,TiN

End Mill,7/64 in.3 Flutes,TiCN

End Mill,9/32 in.3 Flutes,TiN

End Mill,AlTiN,0.3750 in Millng Dia,4V05

End Mill,nACRo,0.187" Shank dia.,Carbide

End Mill,TiAlN,0.5000 in Millng Dia,4VP5

Square End Mill, 0.0050" Milling dia.

Square End Mill, 0.0625" Milling dia.

Square End Mill, 0.0781" Milling dia.

Square End Mill, 3.00 mm Milling Dia., Carbide, TiAlN, Non-Coolant Through, Straight, Length of Cut 4.50 mm, Overall Length 50.00 mm, Shank Dia. 6.00 mm

Square End Mill, 5/16 in Milling Dia., ZrN, Straight, Length of Cut 27/64 in, Overall Length 2 1/2 in, Shank Dia. 19/64 in

Square End Mill,Unfinished,1.5"L,Carbide

Square Milling Insert, Inscribed Circle 1/2 in, Rake -5 Degrees Axial, -6 Degrees Radial

Triangle Turning Insert, Chip-Breaker Code ESU, Inscribed Circle 3/8 in, Al203+TiCN

Triangle Turning Insert, Triangle, 5/8 in, TNMG, 0.0625 in, Carbide

Turning Insert, CNMG, Carbide, 432 Size

Turning Insert, DNMG, Carbide, 432 Size

Turning Insert, Inscribed Circle 0.2362 in, TiN

Turning Insert, Trigon, 3/8 in, WNMG, 1/32 in, Carbide