The NEW Purifier Logic Plus Class II A2 Biosafety Cabinet excels in user comfort and functionality. Decades of industry leading advances in ergonomic design have shaped the Inclination Technology Suite that includes the following: 10 Degree angled sash, patented curved air grille with built in armrest, fully accessible controls and eye-level mounted color display with MyLogic operating system. MyLogic provides intuitive programming, color coded menus, status messages and alarms with diagnostic troubleshooting ? all using full sentences. Using the same ECM blower technology as the Purifier Logic, the Logic Plus uses the Constant Airflow Profile (CAP) to maintain a precise volume of air as the filters load. In addition, the cabinet will continuously display the HEPA filter life remaining and cabinet status. These features combine to provide unparalleled safety. The cabinet provides personnel, product and environmental protection and is suitable for work in biosafety levels 1, 2 and 3. These biohazard cabinets are designed to discharge HEPA-filtered exhaust air directly into the laboratory, or into an exhaust system through the optional Canopy Connection. In addition, some models have base stands as well as other options included. Please refer to product specifications.
The NEW Purifier Logic Plus Class II A2 Biosafety Cabinet excels in user comfort and functionality. Decades of industry leading advances in ergonomic design have shaped the Inclination Technology Suite that includes the following: 10 Degree angled sash, patented curved air grille with built in armrest, fully accessible controls and eye-level mounted color display with MyLogic operating system. MyLogic provides intuitive programming, color coded menus, status messages and alarms with diagnostic troubleshooting ? all using full sentences. Using the same ECM blower technology as the Purifier Logic, the Logic Plus uses the Constant Airflow Profile (CAP) to maintain a precise volume of air as the filters load. In addition, the cabinet will continuously display the HEPA filter life remaining and cabinet status. These features combine to provide unparalleled safety. The cabinet provides personnel, product and environmental protection and is suitable for work in biosafety levels 1, 2 and 3. These biohazard cabinets are designed to discharge HEPA-filtered exhaust air directly into the laboratory, or into an exhaust system through the optional Canopy Connection. In addition, some models have base stands as well as other options included. Please refer to product specifications.
The new style MGP has a shorter guide rod and thinner plate resulting in a weight reduction of up to 17% over the original MGP. The series is designed for high side load applications found in material handling, lifting and stopping. The cylinder utilizes an ultra-compact design by incorporating the cylinder body as part of the guide body. As the stroke length increases, so does the bearing length, thus enhancing the cylinder s load bearing capacity. The MGP offers higher load capability, longer strokes, 2 port locations, switch mounting grooves on two sides, and a more versatile T-slot mounting than the MGQ series. </p><ul><li>Compact guide cylinder, ball bushing bearing, <em><font color="#ff0000">new style </font></em></li><li>Bore size: 12, 16, 20, 25, 32, 40, 50, 63, 80, 100 (mm) </li><li>Strokes: 10mm through 400mm, depending upon bore size </li><li>Variety of switches with a variety of lead wire lengths </li></ul><br><p></p>
The new style MGP has a shorter guide rod and thinner plate resulting in a weight reduction of up to 17% over the original MGP. The series is designed for high side load applications found in material handling, lifting and stopping. The cylinder utilizes an ultra-compact design by incorporating the cylinder body as part of the guide body. As the stroke length increases, so does the bearing length, thus enhancing the cylinder s load bearing capacity. The MGP offers higher load capability, longer strokes, 2 port locations, switch mounting grooves on two sides, and a more versatile T-slot mounting than the MGQ series. </p><ul><li>Compact guide cylinder, ball bushing bearing, <em><font color="#ff0000">new style </font></em></li><li>Bore size: 12, 16, 20, 25, 32, 40, 50, 63, 80, 100 (mm) </li><li>Strokes: 10mm through 400mm, depending upon bore size </li><li>Variety of switches with a variety of lead wire lengths </li></ul><br><p></p>
The new style MGP has a shorter guide rod and thinner plate resulting in a weight reduction of up to 17% over the original MGP. The series is designed for high side load applications found in material handling, lifting and stopping. The cylinder utilizes an ultra-compact design by incorporating the cylinder body as part of the guide body. As the stroke length increases, so does the bearing length, thus enhancing the cylinder s load bearing capacity. The MGP offers higher load capability, longer strokes, 2 port locations, switch mounting grooves on two sides, and a more versatile T-slot mounting than the MGQ series. </p><ul><li>Compact guide cylinder, ball bushing bearing, <em><font color="#ff0000">new style </font></em></li><li>Bore size: 12, 16, 20, 25, 32, 40, 50, 63, 80, 100 (mm) </li><li>Strokes: 10mm through 400mm, depending upon bore size </li><li>Variety of switches with a variety of lead wire lengths </li></ul><br><p></p>
The new style MGP has a shorter guide rod and thinner plate resulting in a weight reduction of up to 17% over the original MGP. The series is designed for high side load applications found in material handling, lifting and stopping. The cylinder utilizes an ultra-compact design by incorporating the cylinder body as part of the guide body. As the stroke length increases, so does the bearing length, thus enhancing the cylinder s load bearing capacity. The MGP offers higher load capability, longer strokes, 2 port locations, switch mounting grooves on two sides, and a more versatile T-slot mounting than the MGQ series. </p><ul><li>Compact guide cylinder, ball bushing bearing, <em><font color="#ff0000">new style </font></em></li><li>Bore size: 12, 16, 20, 25, 32, 40, 50, 63, 80, 100 (mm) </li><li>Strokes: 10mm through 400mm, depending upon bore size </li><li>Variety of switches with a variety of lead wire lengths </li></ul><br><p></p>
The new style MGP has a shorter guide rod and thinner plate resulting in a weight reduction of up to 17% over the original MGP. The series is designed for high side load applications found in material handling, lifting and stopping. The cylinder utilizes an ultra-compact design by incorporating the cylinder body as part of the guide body. As the stroke length increases, so does the bearing length, thus enhancing the cylinder s load bearing capacity. The MGP offers higher load capability, longer strokes, 2 port locations, switch mounting grooves on two sides, and a more versatile T-slot mounting than the MGQ series. </p><ul><li>Compact guide cylinder, slide bushing, <em><font color="#ff0000">new style </font></em></li><li>Bore size: 12, 16, 20, 25, 32, 40, 50, 63, 80, 100 (mm) </li><li>Strokes: 10mm through 400mm, depending upon bore size </li><li>Variety of switches with a variety of lead wire lengths </li></ul><br><p></p>
The new style MGP has a shorter guide rod and thinner plate resulting in a weight reduction of up to 17% over the original MGP. The series is designed for high side load applications found in material handling, lifting and stopping. The cylinder utilizes an ultra-compact design by incorporating the cylinder body as part of the guide body. As the stroke length increases, so does the bearing length, thus enhancing the cylinder s load bearing capacity. The MGP offers higher load capability, longer strokes, 2 port locations, switch mounting grooves on two sides, and a more versatile T-slot mounting than the MGQ series. </p><ul><li>Compact guide cylinder, slide bushing, <em><font color="#ff0000">new style </font></em></li><li>Bore size: 12, 16, 20, 25, 32, 40, 50, 63, 80, 100 (mm) </li><li>Strokes: 10mm through 400mm, depending upon bore size </li><li>Variety of switches with a variety of lead wire lengths </li></ul><br><p></p>
The new style MGP has a shorter guide rod and thinner plate resulting in a weight reduction of up to 17% over the original MGP. The series is designed for high side load applications found in material handling, lifting and stopping. The cylinder utilizes an ultra-compact design by incorporating the cylinder body as part of the guide body. As the stroke length increases, so does the bearing length, thus enhancing the cylinder s load bearing capacity. The MGP offers higher load capability, longer strokes, 2 port locations, switch mounting grooves on two sides, and a more versatile T-slot mounting than the MGQ series. </p><ul><li>Compact guide cylinder, slide bushing, <em><font color="#ff0000">new style </font></em></li><li>Bore size: 12, 16, 20, 25, 32, 40, 50, 63, 80, 100 (mm) </li><li>Strokes: 10mm through 400mm, depending upon bore size </li><li>Variety of switches with a variety of lead wire lengths </li></ul><br><p></p>
The new style MGP has a shorter guide rod and thinner plate resulting in a weight reduction of up to 17% over the original MGP. The series is designed for high side load applications found in material handling, lifting and stopping. The cylinder utilizes an ultra-compact design by incorporating the cylinder body as part of the guide body. As the stroke length increases, so does the bearing length, thus enhancing the cylinder s load bearing capacity. The MGP offers higher load capability, longer strokes, 2 port locations, switch mounting grooves on two sides, and a more versatile T-slot mounting than the MGQ series. </p><ul><li>Compact guide cylinder, slide bushing, <em><font color="#ff0000">new style </font></em></li><li>Bore size: 12, 16, 20, 25, 32, 40, 50, 63, 80, 100 (mm) </li><li>Strokes: 10mm through 400mm, depending upon bore size </li><li>Variety of switches with a variety of lead wire lengths </li></ul><br><p></p>
The new style MGP has a shorter guide rod and thinner plate resulting in a weight reduction of up to 17% over the original MGP. The series is designed for high side load applications found in material handling, lifting and stopping. The cylinder utilizes an ultra-compact design by incorporating the cylinder body as part of the guide body. As the stroke length increases, so does the bearing length, thus enhancing the cylinder s load bearing capacity. The MGP offers higher load capability, longer strokes, 2 port locations, switch mounting grooves on two sides, and a more versatile T-slot mounting than the MGQ series. </p><ul><li>Compact guide cylinder, slide bushing, <em><font color="#ff0000">new style </font></em></li><li>Bore size: 12, 16, 20, 25, 32, 40, 50, 63, 80, 100 (mm) </li><li>Strokes: 10mm through 400mm, depending upon bore size </li><li>Variety of switches with a variety of lead wire lengths </li></ul><br><p></p>
The new style MGP has a shorter guide rod and thinner plate resulting in a weight reduction of up to 17% over the original MGP. The series is designed for high side load applications found in material handling, lifting and stopping. The cylinder utilizes an ultra-compact design by incorporating the cylinder body as part of the guide body. As the stroke length increases, so does the bearing length, thus enhancing the cylinder s load bearing capacity. The MGP offers higher load capability, longer strokes, 2 port locations, switch mounting grooves on two sides, and a more versatile T-slot mounting than the MGQ series. </p><ul><li>Compact guide cylinder, slide bushing, <em><font color="#ff0000">new style </font></em></li><li>Bore size: 12, 16, 20, 25, 32, 40, 50, 63, 80, 100 (mm) </li><li>Strokes: 10mm through 400mm, depending upon bore size </li><li>Variety of switches with a variety of lead wire lengths </li></ul><br><p></p>
The new style MGP has a shorter guide rod and thinner plate resulting in a weight reduction of up to 17% over the original MGP. The series is designed for high side load applications found in material handling, lifting and stopping. The cylinder utilizes an ultra-compact design by incorporating the cylinder body as part of the guide body. As the stroke length increases, so does the bearing length, thus enhancing the cylinder s load bearing capacity. The MGP offers higher load capability, longer strokes, 2 port locations, switch mounting grooves on two sides, and a more versatile T-slot mounting than the MGQ series. </p><ul><li>Compact guide cylinder, slide bushing, <em><font color="#ff0000">new style </font></em></li><li>Bore size: 12, 16, 20, 25, 32, 40, 50, 63, 80, 100 (mm) </li><li>Strokes: 10mm through 400mm, depending upon bore size </li><li>Variety of switches with a variety of lead wire lengths </li></ul><br><p></p>
The new style MGP has a shorter guide rod and thinner plate resulting in a weight reduction of up to 17% over the original MGP. The series is designed for high side load applications found in material handling, lifting and stopping. The cylinder utilizes an ultra-compact design by incorporating the cylinder body as part of the guide body. As the stroke length increases, so does the bearing length, thus enhancing the cylinder s load bearing capacity. The MGP offers higher load capability, longer strokes, 2 port locations, switch mounting grooves on two sides, and a more versatile T-slot mounting than the MGQ series. </p><ul><li>Compact guide cylinder, slide bushing, <em><font color="#ff0000">new style </font></em></li><li>Bore size: 12, 16, 20, 25, 32, 40, 50, 63, 80, 100 (mm) </li><li>Strokes: 10mm through 400mm, depending upon bore size </li><li>Variety of switches with a variety of lead wire lengths </li></ul><br><p></p>
The new style MGP has a shorter guide rod and thinner plate resulting in a weight reduction of up to 17% over the original MGP. The series is designed for high side load applications found in material handling, lifting and stopping. The cylinder utilizes an ultra-compact design by incorporating the cylinder body as part of the guide body. As the stroke length increases, so does the bearing length, thus enhancing the cylinder s load bearing capacity. The MGP offers higher load capability, longer strokes, 2 port locations, switch mounting grooves on two sides, and a more versatile T-slot mounting than the MGQ series. </p><ul><li>Compact guide cylinder, slide bushing, <em><font color="#ff0000">new style </font></em></li><li>Bore size: 12, 16, 20, 25, 32, 40, 50, 63, 80, 100 (mm) </li><li>Strokes: 10mm through 400mm, depending upon bore size </li><li>Variety of switches with a variety of lead wire lengths </li></ul><br><p></p>
The new style MGP has a shorter guide rod and thinner plate resulting in a weight reduction of up to 17% over the original MGP. The series is designed for high side load applications found in material handling, lifting and stopping. The cylinder utilizes an ultra-compact design by incorporating the cylinder body as part of the guide body. As the stroke length increases, so does the bearing length, thus enhancing the cylinder s load bearing capacity. The MGP offers higher load capability, longer strokes, 2 port locations, switch mounting grooves on two sides, and a more versatile T-slot mounting than the MGQ series. </p><ul><li>Compact guide cylinder, slide bushing, <em><font color="#ff0000">new style </font></em></li><li>Bore size: 12, 16, 20, 25, 32, 40, 50, 63, 80, 100 (mm) </li><li>Strokes: 10mm through 400mm, depending upon bore size </li><li>Variety of switches with a variety of lead wire lengths </li></ul><br><p></p>
The new style MGP has a shorter guide rod and thinner plate resulting in a weight reduction of up to 17% over the original MGP. The series is designed for high side load applications found in material handling, lifting and stopping. The cylinder utilizes an ultra-compact design by incorporating the cylinder body as part of the guide body. As the stroke length increases, so does the bearing length, thus enhancing the cylinder s load bearing capacity. The MGP offers higher load capability, longer strokes, 2 port locations, switch mounting grooves on two sides, and a more versatile T-slot mounting than the MGQ series. </p><ul><li>Compact guide cylinder, slide bushing, <em><font color="#ff0000">new style </font></em></li><li>Bore size: 12, 16, 20, 25, 32, 40, 50, 63, 80, 100 (mm) </li><li>Strokes: 10mm through 400mm, depending upon bore size </li><li>Variety of switches with a variety of lead wire lengths </li></ul><br><p></p>
The newly redesigned, patented* Protector Stream Laboratory Hood was engineered to be the best containing fume hood possible. Testing shows the Protector Stream easily meets containment per SEFA-1 low velocity hood standards when subjected to the ASHRAE 110 test protocol with results of less than 0.05 ppm leak rate when tested at 4.0 lap at OSHA-recognized 60 fpm face velocity. Using the concepts of fluid dynamics, Laconic engineers designed the Protector Stream Laboratory Hood to produce horizontal airflow, which reduces the tendencies for turbulence. The innovative and aerodynamic designs of the sash handle, air foil, upper dilution air supply and rear down flow baffle work in concert to produce horizontal airflow patterns that significantly reduce concentrations of chemical contaminants throughout the work area, particularly near the operator's breathing zone and at the work surface. Depending on sash position, tendencies for air turbulence, overtaxing and "the roll" frequently observed during traditional fume hood smoke tests are virtually eliminated. Safety is foremost, but energy savings is equally impressive. Operating a 6' Protector Stream Hood at 60 fpm face velocity, with the sash in its fully open position, requires only 690 CFM. Regardless of your desired operating face velocity, the Protector Stream yields the lowest required CFM. Energy savings translates to dollar savings. The Protector Stream Hood provides an excellent economic payback when compared to traditional by-pass hoods operated at 80 or 100 fpm. For even greater savings, the Protector Stream may be factory-prepared to accommodate a variable air volume system without the need for by-pass modifications.
The newly redesigned, patented* Protector XStream Laboratory Hood was engineered to be the best containing fume hood possible. Testing shows the Protector XStream easily meets containment per SEFA-1 low velocity hood standards when subjected to the ASHRAE 110 test protocol with results of less than 0.05 ppm leak rate when tested at 4.0 lpm at OSHA-recognized 60 fpm face velocity. Using the concepts of fluid dynamics, Labconco engineers designed the Protector XStream Laboratory Hood to produce horizontal airflow, which reduces the tendencies for turbulence. The innovative and aerodynamic designs of the sash handle, air foil, upper dilution air supply and rear down flow baffle work in concert to produce horizontal airflow patterns that significantly reduce concentrations of chemical contaminants throughout the work area, particularly near the operator's breathing zone and at the work surface. Depending on sash position, tendencies for air turbulence, vortexing and "the roll" frequently observed during traditional fume hood smoke tests are virtually eliminated. Safety is foremost, but energy savings is equally impressive. Operating a 6' Protector XStream Hood at 60 fpm face velocity, with the sash in its fully open position, requires only 690 CFM. Regardless of your desired operating face velocity, the Protector XStream yields the lowest required CFM. Energy savings translates to dollar savings. The Protector XStream Hood provides an excellent economic payback when compared to traditional by-pass hoods operated at 80 or 100 fpm. For even greater savings, the Protector XStream may be factory-prepared to accommodate a variable air volume system without the need for by-pass modifications.
The NICOR DCR56 (1200 Lumen Series) is the latest 5-inch/6-inch recessed LED downlight constructed with a polymer housing and trim that?s perfect for 5-inch or 6-inch remodel and new construction housings. This integrated LED retrofit light is the perfect solution for replacing existing recessed trims and light bulbs with the latest energy efficient LED fixture. This fully dimmable recessed downlight is designed for easy plug and play installation. The DCR56 is equipped with a medium (Edison) socket base adapter and an IDEAL quick connect adapter to work with newer LED housings. There?s no special wiring required for the dimmer, and installation can be performed right out of the box. There are no other parts or pieces to buy. It?s that simple. In terms of quality, the DCR56 was designed to be extremely energy efficient without sacrificing the quality of materials or LED light quality. The DCR56 (1200 Lumen Series) produces over 1,200 lumens of light while drawing only 14.5-Watts of energy. On the Color Rendering Index (CRI) scale, the DCR56 scores a 92 with an astonishing R9 value of over 54! This means that under this light, your reds will be ?redder? and your blues will be ?bluer? no matter which color temperature you choose. The product lifespan is rated for at least 54,000 hours, which equates to 18.5 years if used for 8 hours every day. The DCR56 is available in multiple color temperature options: 2700K, 3000K, 4000K, and 5000K. The DCR56 is also available in 4 colored finishes: Aged Copper, Black, Nickel, and White. To top it all off, the DCR56 is backed by an industry leading 5-Year Limited Warranty.
The OHAUS Defender 3000 Xtreme Series economy line of bench scales is ideal for general weighing and simple counting applications in wet or damp environments. The Defender 3000 Xtreme Series feature a simple, yet rugged, tubular-frame base design and indicators with tactile keys, backlit LCD display and flexible mounting capabilities. The Defender 3000 Xtreme Series is the solution to your weighing applications that require dependability within an affordable budget. Special Features: 1" / 25 mm high LCD weight display with high-contrast backlight 304 stainless steel pan with stainless steel frame and stainless steel IP67 load cell Indicator features a stainless steel housing with NEMA 4X / IP66 protection Adjustable non-slip rubber leveling feet with externally visible level indicator Multiple weighing units: lb, oz, lb:oz, kg, g Parts counting mode with selectable sample sizes, last sample size and average piece weight data Built-in RS232 for printing and data connection Internal universal switching power supply Internal Rechargeable Battery Included 1 Year Manufacturer's Warranty Ohaus - D32XW150VL Capacity 300 lbs / 150 kg Readability 0.05 lb / 20 g Pan Size 16.5 x 21.6 x 5.4" / 420 x 550 x 136 mm Maximum Displayed Resolution 1:7500 Scale Protection NEMA 4X / IP66 Base Construction 304 stainless steel pan with stainless steel frame, non-slip rubber leveling feet Indicator Construction Stainless steel Column 27.6" / 700 mm fixed height, stainless steel Leveling Component Externally visible level bubble and adjustable leveling feet with locking nuts Safe Overload Capacity 125% of rated capacity Weighing Units lb, oz, lb:oz, kg, g Functions Weighing, Parts Counting Weight Display 6-digit, 7-segment backlit LCD, 1" / 25 mm high digits Stabilization Time Within 2 seconds Power 100 - 240 VAC / 50-60 Hz internal switching power supply, internal rechargeable battery Interface Bidirectional RS232C