The SMC AS elbow air flow control valve is made of polybutylene terephthalate (PBT) plastic and nickel-plated brass with a push-to-connect tube fitting on the inlet port and male National Pipe Taper (NPT) threads with sealant on the outlet port. The valve body is made of PBT for strength and light weight, and the internal metal parts are made of nickel-plated brass for resistance to corrosion. This valve has NPT threads with polytetrafluoroethylene (PTFE) sealant on the outlet for creating a tighter seal than straight threads, and the push-to-connect fitting on the inlet allows a one-touch connection to nylon, soft nylon, or polyurethane tubing. This valve is designed to be located upstream of the cylinder for meter-in control, and the knob provides ten needle rotations for precise manual adjustment of the air flow. The maximum operating pressure is 145 pounds per square inch (psi), and the ambient and fluid temperature range is 23 to 140 degrees F (-5 to 60 degrees C). This air flow control valve has a lock nut to lock the needle setting, and a retainer to help prevent loss of the needle. Air flow control valves (also called speed controllers) regulate the flow of compressed air into or out of pneumatic cylinders to control the speed of motion of the piston in the cylinder. The valves have an adjustable metering needle and a check valve to control the flow in only one direction. Air entering the valve is blocked by the check valve and forced to pass through the needle valve, and the position of the needle is adjusted to determine the rate of flow. Pneumatic systems with cylinders are used for applications such as truck and train air brakes, air compressors, and tools for mining, manufacturing, and construction. SMC Corporation of America, a U.S. subsidiary of SMC Corporation in Japan, was founded in 1959 in Tokyo. SMC manufactures actuators, valves, airline equipment, connector fittings, electrical products, vacuum products, dryers, temperature control chillers, and a broad range of related accessories. SMC Corporation of America is headquartered in Noblesville, IN, and meets International Organization for Standardization (ISO) 9000:2000 standards.
The SMC AS elbow air flow control valve is made of polybutylene terephthalate (PBT) plastic and nickel-plated brass with male universal threads on the inlet port and a push-to-connect tube fitting on the outlet port. The valve body is made of PBT for strength and light weight, and the internal metal parts are made of nickel-plated brass for resistance to corrosion. This valve is designed to be located downstream of the cylinder for meter-out control, and the knob provides ten needle rotations for precise manual adjustment of the air flow. The universal inlet fitting will connect with any standard chamfered female thread, and the push-to-connect outlet fitting allows a one-touch connection to nylon, soft nylon, or polyurethane tubing. The maximum operating pressure is 145 pounds per square inch (psi), and the ambient and fluid temperature range is 23 to 140 degrees F (-5 to 60 degrees C). This air flow control valve has a lock nut to lock the needle setting. Air flow control valves (also called speed controllers) regulate the flow of compressed air into or out of pneumatic cylinders to control the speed of motion of the piston in the cylinder. The valves have an adjustable metering needle and a check valve to control the flow in only one direction. Air entering the valve is blocked by the check valve and forced to pass through the needle valve, and the position of the needle is adjusted to determine the rate of flow. Pneumatic systems with cylinders are used for applications such as truck and train air brakes, air compressors, and tools for mining, manufacturing, and construction. SMC Corporation of America, a U.S. subsidiary of SMC Corporation in Japan, was founded in 1959 in Tokyo. SMC manufactures actuators, valves, airline equipment, connector fittings, electrical products, vacuum products, dryers, temperature control chillers, and a broad range of related accessories. SMC Corporation of America is headquartered in Noblesville, IN, and meets International Organization for Standardization (ISO) 9000:2000 standards.
The SMC AS elbow air flow control valve is made of polybutylene terephthalate (PBT) plastic and nickel-plated brass with male universal threads on the inlet port and a push-to-connect tube fitting on the outlet port. The valve body is made of PBT for strength and light weight, and the internal metal parts are made of nickel-plated brass for resistance to corrosion. This valve is designed to be located downstream of the cylinder for meter-out control, and the knob provides ten needle rotations for precise manual adjustment of the air flow. The universal inlet fitting will connect with any standard chamfered female thread, and the push-to-connect outlet fitting allows a one-touch connection to nylon, soft nylon, or polyurethane tubing. The maximum operating pressure is 145 pounds per square inch (psi), and the ambient and fluid temperature range is 23 to 140 degrees F (-5 to 60 degrees C). This air flow control valve has a lock nut to lock the needle setting. Air flow control valves (also called speed controllers) regulate the flow of compressed air into or out of pneumatic cylinders to control the speed of motion of the piston in the cylinder. The valves have an adjustable metering needle and a check valve to control the flow in only one direction. Air entering the valve is blocked by the check valve and forced to pass through the needle valve, and the position of the needle is adjusted to determine the rate of flow. Pneumatic systems with cylinders are used for applications such as truck and train air brakes, air compressors, and tools for mining, manufacturing, and construction. SMC Corporation of America, a U.S. subsidiary of SMC Corporation in Japan, was founded in 1959 in Tokyo. SMC manufactures actuators, valves, airline equipment, connector fittings, electrical products, vacuum products, dryers, temperature control chillers, and a broad range of related accessories. SMC Corporation of America is headquartered in Noblesville, IN, and meets International Organization for Standardization (ISO) 9000:2000 standards.
The SMC AS elbow air flow control valve with tamper proof adjusting is made of polybutylene terephthalate (PBT) plastic and nickel-plated brass, and has male National Pipe Taper (NPT) threads with sealant on the inlet port and a push-to-connect tube fitting on the outlet port. The valve body is made of PBT for strength and light weight, and the internal metal parts are made of nickel-plated brass for resistance to corrosion. This valve has NPT threads with polytetrafluoroethylene (PTFE) sealant on the inlet for creating a tighter seal than straight threads, and the push-to-connect fitting on the outlet allows a one-touch connection to nylon, soft nylon, or polyurethane tubing. It is designed to be located downstream of the cylinder for meter-out control. Air flow is set with a special tool (sold separately) to help prevent unwanted adjustments, and there are ten needle rotations for precise manual control of the flow rate. The maximum operating pressure is 145 pounds per square inch (psi), and the ambient and fluid temperature range is 23 to 140 degrees F (-5 to 60 degrees C). Air flow control valves (also called speed controllers) regulate the flow of compressed air into or out of pneumatic cylinders to control the speed of motion of the piston in the cylinder. The valves have an adjustable metering needle and a check valve to control the flow in only one direction. Air entering the valve is blocked by the check valve and forced to pass through the needle valve, and the position of the needle is adjusted to determine the rate of flow. Pneumatic systems with cylinders are used for applications such as truck and train air brakes, air compressors, and tools for mining, manufacturing, and construction. SMC Corporation of America, a U.S. subsidiary of SMC Corporation in Japan, was founded in 1959 in Tokyo. SMC manufactures actuators, valves, airline equipment, connector fittings, electrical products, vacuum products, dryers, temperature control chillers, and a broad range of related accessories. SMC Corporation of America is headquartered in Noblesville, IN, and meets International Organization for Standardization (ISO) 9000:2000 standards.
The SMC AS in-line air flow control valve is made of polybutylene terephthalate (PBT) plastic and nickel-plated brass with push-to-connect tube fittings on the inlet and outlet ports. The valve body is made of PBT for strength and light weight, and all metal parts are made of nickel-plated brass for resistance to corrosion. This valve is designed to mount on a control panel using the hexagonal panel nut, and the knob provides ten needle rotations (eight for the M5 body size) for precise manual adjustment of the air flow. The push-to-connect fittings allow a one-touch connection to nylon, soft nylon, or polyurethane tubing. The maximum operating pressure is 145 pounds per square inch (psi), and the ambient and fluid temperature range is 23 to 140 degrees F (-5 to 60 degrees C). This air flow control valve has a lock nut to lock the needle setting. Air flow control valves (also called speed controllers) regulate the flow of compressed air into or out of pneumatic cylinders to control the speed of motion of the piston in the cylinder. The valves have an adjustable metering needle and a check valve to control the flow in only one direction. Air entering the valve is blocked by the check valve and forced to pass through the needle valve, and the position of the needle is adjusted to determine the rate of flow. Pneumatic systems with cylinders are used for applications such as truck and train air brakes, air compressors, and tools for mining, manufacturing, and construction. SMC Corporation of America, a U.S. subsidiary of SMC Corporation in Japan, was founded in 1959 in Tokyo. SMC manufactures actuators, valves, airline equipment, connector fittings, electrical products, vacuum products, dryers, temperature control chillers, and a broad range of related accessories. SMC Corporation of America is headquartered in Noblesville, IN, and meets International Organization for Standardization (ISO) 9000:2000 standards.
The SMC AS universal air flow control valve is made of polybutylene terephthalate (PBT) plastic and nickel-plated brass with male National Pipe Taper (NPT) threads on the inlet port and a push-to-connect tube fitting on the outlet port. The valve body is made of PBT for strength and light weight, and the internal metal parts are made of nickel-plated brass for resistance to corrosion. This valve has NPT threads with polytetrafluoroethylene (PTFE) sealant on the inlet for creating a tighter seal than straight threads, and the push-to-connect fitting on the outlet allows a one-touch connection to nylon, soft nylon, or polyurethane tubing. This valve is designed to be located downstream of the cylinder for meter-out control, and the outlet can be swiveled to any angle for flexibility in mounting. The knob provides ten needle rotations for precise manual adjustment of the air flow. The maximum operating pressure is 145 pounds per square inch (psi), and the ambient and fluid temperature range is 23 to 140 degrees F (-5 to 60 degrees C). This air flow control valve has a lock nut to lock the needle setting, and a retainer to help prevent accidental loss of the needle. Air flow control valves (also called speed controllers) regulate the flow of compressed air into or out of pneumatic cylinders to control the speed of motion of the piston in the cylinder. The valves have an adjustable metering needle and a check valve to control the flow in only one direction. Air entering the valve is blocked by the check valve and forced to pass through the needle valve, and the position of the needle is adjusted to determine the rate of flow. Pneumatic systems with cylinders are used for applications such as truck and train air brakes, air compressors, and tools for mining, manufacturing, and construction. SMC Corporation of America, a U.S. subsidiary of SMC Corporation in Japan, was founded in 1959 in Tokyo. SMC manufactures actuators, valves, airline equipment, connector fittings, electrical products, vacuum products, dryers, temperature control chillers, and a broad range of related accessories. SMC Corporation of America is headquartered in Noblesville, IN, and meets International Organization for Standardization (ISO) 9000:2000 standards.
The SMC KA series 90-degree elbow fitting is made of brass and has tube and UNI male connectors. This 90-degree elbow fitting, or "ell," connects two pipes at a 90-degree angle to change the direction of flow between pipes. It is a push-to-connect fitting that connects to pipes or tubing on one end and has a Universal (UNI) male connector on the other. The fitting is made of brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability. Brass can be connected to copper, brass, plastic, aluminum, and welded steel. The working pressure for this fitting is up to 145 pounds per square inch (psi), and its operating temperature ranges from 0 to 40 degrees C.Pipe fittings are components used for connecting, terminating, controlling flow, and changing the direction of piping in many different industries. Push-to-connect compression fittings do not require tools or sealants, and are useful in installations where a heat source, such as a soldering torch, is prohibited. When purchasing pipe fittings, consider the application, as this will affect material type, shape, size, and required durability. Fittings are available threaded or unthreaded, in many shapes, styles, sizes, and schedules (pipe wall thickness).SMC Corporation manufactures actuators, valves, airline equipment, connector fittings, electrical products, vacuum products, dryers, temperature control chillers, and accessories. SMC Corporation of America is headquartered in Noblesville, IN, and meets International Organization for Standardization (ISO) 9000:2000 standards.
The SMC KA series 90-degree elbow fitting is made of brass and has tube and UNI male connectors. This 90-degree elbow fitting, or "ell," connects two pipes at a 90-degree angle to change the direction of flow between pipes. It is a push-to-connect fitting that connects to pipes or tubing on one end and has a Universal (UNI) male connector on the other. The fitting is made of brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability. Brass can be connected to copper, brass, plastic, aluminum, and welded steel. The working pressure for this fitting is up to 145 pounds per square inch (psi), and its operating temperature ranges from 0 to 40 degrees C.Pipe fittings are components used for connecting, terminating, controlling flow, and changing the direction of piping in many different industries. Push-to-connect compression fittings do not require tools or sealants, and are useful in installations where a heat source, such as a soldering torch, is prohibited. When purchasing pipe fittings, consider the application, as this will affect material type, shape, size, and required durability. Fittings are available threaded or unthreaded, in many shapes, styles, sizes, and schedules (pipe wall thickness).SMC Corporation manufactures actuators, valves, airline equipment, connector fittings, electrical products, vacuum products, dryers, temperature control chillers, and accessories. SMC Corporation of America is headquartered in Noblesville, IN, and meets International Organization for Standardization (ISO) 9000:2000 standards.
The SMC KG series 90-degree elbow fitting with sealant is made of stainless steel 303 and has tube and BSPT male connectors. This 90-degree elbow fitting, or "ell," with sealant connects two pipes at a 90-degree angle to change direction of flow between pipes. It is a push-to-connect fitting that connects to pipes or tubing on one end and has a British Standard Pipe Taper (BSPT) male connector on the other. It is made of stainless steel for resistance to scaling and corrosion. The working pressure for this fitting is up to 145 pounds per square inch (psi), and its operating temperature ranges from -5 to 60 degrees C.Pipe fittings are components used for connecting, terminating, controlling flow, and changing the direction of piping in many different industries. Push-to-connect compression fittings do not require tools or sealants, and are useful in installations where a heat source, such as a soldering torch, is prohibited. When purchasing pipe fittings, consider the application, as this will affect material type, shape, size, and required durability. Fittings are available threaded or unthreaded, in many shapes, styles, sizes, and schedules (pipe wall thickness).SMC Corporation manufactures actuators, valves, airline equipment, connector fittings, electrical products, vacuum products, dryers, temperature control chillers, and accessories. SMC Corporation of America is headquartered in Noblesville, IN, and meets International Organization for Standardization (ISO) 9000:2000 standards.
The SMC KQ series plug fitting is made of polybutylene terephthalate (PBT) and has a tube connector. This plug fitting inserts into a pipe or fitting to close and terminate its end. It is a push-to-connect fitting that accepts the insertion of nylon, soft nylon and polyurethane tube fittings. This fitting is made of polybutylene terephthalate (PBT), which is a polymer resistant to solvents, shrinkage, heat, and impact. It can be treated to increase resistance to UV and flammability. The working pressure for this fitting is up to 145 pounds per square inch (psi), and its operating temperature ranges from -5 to 60 degrees C.Pipe fittings are components used for connecting, terminating, controlling flow, and changing the direction of piping in many different industries. Push-to-connect compression fittings do not require tools or sealants, and are useful in installations where a heat source, such as a soldering torch, is prohibited. When purchasing pipe fittings, consider the application, as this will affect material type, shape, size, and required durability. Fittings are available threaded or unthreaded, in many shapes, styles, sizes, and schedules (pipe wall thickness).SMC Corporation manufactures actuators, valves, airline equipment, connector fittings, electrical products, vacuum products, dryers, temperature control chillers, and accessories. SMC Corporation of America is headquartered in Noblesville, IN, and meets International Organization for Standardization (ISO) 9000:2000 standards.
The SMC KQ2 series plug fitting is made of polybutylene terephthalate (PBT) and has a tube connector. This plug fitting inserts into a pipe or fitting to close and terminate its end. It is a push-to-connect fitting that accepts the insertion of nylon, soft nylon and polyurethane tube fittings. The fitting is made of polybutylene terephthalate (PBT), which is a polymer resistant to solvents, shrinkage, heat, and impact, and it can be treated to increase resistance to UV and flammability. The working pressure for this fitting is up to 145 pounds per square inch (psi), and its operating temperature ranges from -5 to 60 degrees C.Pipe fittings are components used for connecting, terminating, controlling flow, and changing the direction of piping in many different industries. Push-to-connect compression fittings do not require tools or sealants, and are useful in installations where a heat source, such as a soldering torch, is prohibited. When purchasing pipe fittings, consider the application, as this will affect material type, shape, size, and required durability. Fittings are available threaded or unthreaded, in many shapes, styles, sizes, and schedules (pipe wall thickness).SMC Corporation manufactures actuators, valves, airline equipment, connector fittings, electrical products, vacuum products, dryers, temperature control chillers, and accessories. SMC Corporation of America is headquartered in Noblesville, IN, and meets International Organization for Standardization (ISO) 9000:2000 standards.
The SMC KQ2 series reducer nipple fitting is made of polybutylene terephthalate (PBT) and has tube connectors. This reducer nipple fitting is for connecting pipes or fittings with different diameters. It is a push-to-connect fitting that accepts the insertion of nylon, soft nylon and polyurethane tube fittings. The fitting is made of polybutylene terephthalate (PBT), which is a polymer resistant to solvents, shrinkage, heat, and impact, and it can be treated to increase resistance to UV and flammability. The working pressure for this fitting is up to 145 pounds per square inch (psi), and its operating temperature ranges from -5 to 60 degrees C.Pipe fittings are components used for connecting, terminating, controlling flow, and changing the direction of piping in many different industries. Push-to-connect compression fittings do not require tools or sealants, and are useful in installations where a heat source, such as a soldering torch, is prohibited. When purchasing pipe fittings, consider the application, as this will affect material type, shape, size, and required durability. Fittings are available threaded or unthreaded, in many shapes, styles, sizes, and schedules (pipe wall thickness).SMC Corporation manufactures actuators, valves, airline equipment, connector fittings, electrical products, vacuum products, dryers, temperature control chillers, and accessories. SMC Corporation of America is headquartered in Noblesville, IN, and meets International Organization for Standardization (ISO) 9000:2000 standards.
The solution for a linear-actuator subject to high loads. Ideal for material handling applications. Two basic models include a self-lubricating slide bushing and a linear ball bearing style. The 100mm slide bushing model can stop a load of 3,000 lbs. traveling at 55ft/min, or smoothly lift a centered load of 1,000 lbs. with a 40% safety factor. The overall package is very compact, and pre-tapped mounting holes ensure easy attachment of fixtures. Mounts on side or bottom. The MGQ offers bore sizes from 12 to 100mm and is switch capable.</p><ul><li>Compact guide cylinder</li><li>Ball bushing bearing</li><li>Bore sizes: 12, 16, 20, 25, 32, 40, 50, 63, 80, 100 *</li><li>Strokes from 10mm through 200mm depending upon bore size</li><li>Variety of switches and a variety of lead wire lengths</li></ul><br><p></p>
The solution for a linear-actuator subject to high loads. Ideal for material handling applications. Two basic models include a self-lubricating slide bushing and a linear ball bearing style. The 100mm slide bushing model can stop a load of 3,000 lbs. traveling at 55ft/min, or smoothly lift a centered load of 1,000 lbs. with a 40% safety factor. The overall package is very compact, and pre-tapped mounting holes ensure easy attachment of fixtures. Mounts on side or bottom. The MGQ offers bore sizes from 12 to 100mm and is switch capable.</p><ul><li>Compact guide cylinder</li><li>Bore sizes: 12, 16, 20, 25, 32, 40, 50, 63, 80, 100 *</li><li>Strokes from 10mm through 200mm depending upon bore size</li><li>Variety of switches and a variety of lead wire lengths</li></ul><br><p></p>
The solution for a linear-actuator subject to high loads. Ideal for material handling applications. Two basic models include a self-lubricating slide bushing and a linear ball bearing style. The 100mm slide bushing model can stop a load of 3,000 lbs. traveling at 55ft/min, or smoothly lift a centered load of 1,000 lbs. with a 40% safety factor. The overall package is very compact, and pre-tapped mounting holes ensure easy attachment of fixtures. Mounts on side or bottom. The MGQ offers bore sizes from 12 to 100mm and is switch capable.</p><ul><li>Compact guide cylinder</li><li>Bore sizes: 12, 16, 20, 25, 32, 40, 50, 63, 80, 100 *</li><li>Strokes from 10mm through 200mm depending upon bore size</li><li>Variety of switches and a variety of lead wire lengths</li></ul><br><p></p>
The Sorrento Series L-shaped configurations are offered in a choice of left-handed and right-handed l-configurations. All of the returns feature a technology access panel for convenient connectivity. The executive CPU L-shaped configurations feature a pencil/box/file desk pedestal and a CPU pedestal in the credenza. The CPU pedestals feature a ventilated CPU tower compartment, three adjustable storage compartments, and a standard power module with outlets for CPU, printer, and monitor. Mayline heritage began in 1939, Manufacturing drafting tables as the engineering Supply company. today Mayline is one of the leading mid-market contract furniture Manufacturers in the U. S. , offering a complete collection of office furniture, filing, storage, and customized solutions. Mayline understands you have unique workplace needs, so every effort is made to optimize the environment to fit both your style and your space.
The st-328 is a permanent mount stroboscope array utilizing bright high powered Xenon Style lamps. The st-328?s Xenon light array provides a bright, stable strobe light over a wide measurement range. The st-328 arrays are available in several standard sizes from 10? (260 mm) to 71? (1800 mm) in length. Custom sizes are available upon request. The arrays are easily mountable on production equipment. An optional mounting adapter Kit is available to aid in array installation. An integral or remote control enclosure is available to program the unit. If selecting the separate, external control enclosure, communication is via a 9.8? (3 M) connecting cable. Operation is simple with the 6 button keypad and large, LED display. Flash rate is quickly adjustable via the control dial. The unit can work off user programmed flash frequency or from a remote sensor?s signal which will automatically adjust to corresponding process fluctuations. The st-328 is designed for speed and frequency measurements in the printing, packaging, textile, automotive, cable, mining, steel, chemical, optical, medical and shipbuilding industries in various applications.
The Steel Dragon Tools 700 Power Drive Pipe Threader 41935 is a hand-held pipe threading machine designed to fit Steel Dragon Tools and RIDGID? 12-R die heads. This power drive pipe threader has a pipe capacity of 1/-8 in. to 2 in. (6 mm to 50 mm) and a bolt capacity of 1/4 in. to 1 in. (8 mm to 25 mm) when using a 00-RD die head. The Steel Dragon Tools 700 is made of cast aluminum.</p><p><strong>Package Includes:</strong></p><ul><li>Steel Dragon Tools 700 Power Drive Pipe Threader 41935</li><li>Steel Dragon Tools 12-R Manual Ratchet Pipe Threader</li><li>Six (6) Steel Dragon Tools 12-R Die Heads: 1/2 in., 3/4 in., 1 in., 1-1/4 in., 1-1/2 in., 2 in.</li><li>Six (6) Steel Dragon Tools NPT Alloy Die Sets: 1/2 in., 3/4 in., 1 in., 1-1/4 in., 1-1/2 in., 2 in.</li><li>Steel Dragon Tools 418 Oiler Bucket</li><li>Steel Dragon Tools 460 Tripod Stand Chain Vise</li><li>Steel Dragon Tools 2A Pipe Cutter</li></ul><p><strong>Steel Dragon Tools 700 Power Drive Pipe Threader Features:</strong></p><ul><li>Hand-held power drive pipe threader will thread a variety of pipe.</li><li>Heavy-duty, cast-aluminum body provides long operating life.</li><li>All-spur gear reduction gearhead with spring-loaded adapter pawl and hardened-steel spindle gear.</li><li>Designed for use with Steel Dragon Tools and RIDGID? 12-R Die Heads.</li><li>Can be used with RIDGID? Die Heads OO-R, OO-RB, 11-R when using adapters.</li><li>Will thread 2-1/2-inch to 6-inch pipe (62 mm to 150 mm) with RIDGID? 141/161 Geared Threaders.</li><li>Can also be used with RIDGID? 258/258XL Pipe Cutters.</li></ul>