dataSource: amazonScraper

Products with this attribute (89737 total)

These colourful easy to use Bungee cord strap kits from TYR will fit any goggle that allows replacement straps. The cords are made with durable elastic with a woven outer layer. Easy to use speed adjust cord lock. Available in an array of fun colors, you?ll surely stand out when you dive in

These contact tips are wire size 0.035" with for use with MK products style.

These cost-effective nitrile gloves contain no natural rubber proteins and are an ideal solution for individuals allergic to natural rubber latex. These gloves are easy to don, Odor-free, reduce hand fatigue and offer superior puncture and chemical resistance. Textured finish.

These countersinks are designed for use on thin sheet metal. Chamfer,debur,countersink and enlarge holes.

These couplers are supplied with locking feature. safety clips may be inserted to lock handles, preventing disconnection during product transfer. Size 1/2" x 1/2" supplied with one sintered stainless steel handle, size 3/4" supplied with two sintered stainless steel handles.

These devices consist of two independent, high-gain frequency-compensated operational amplifiers designed to operate from a single supply over a wide range of voltages. Operation from split supplies also is possible if the difference between the two supplies is 3 V to 32 V (3 V to 26 V for the LM2904), and VCC is at least 1.5 V more positive than the input common-mode voltage. The low supply-current drain is independent of the magnitude of the supply voltage. Applications include transducer amplifiers, dc amplification blocks, and all the conventional operational amplifier circuits that now can be implemented more easily in single-supply-voltage systems. For example, these devices can be operated directly from the standard 5-V supply used in digital systems and easily can provide the required interface electronics without additional ? 5-V supplies.

These durable and versatile endless slings will become your first choice for synthetic slings once you?ve tried them. A double wall jacket completely covers the polyester lifting fibers. Maintains 100% of original strength until jacket damage exposes core yarns.

These durable guitar straps will provide reliability for years to come. The On Stage GSA10 Guitar Strap is available in a variety of colors and patterns to suite your style. Every GSA10 guitar strap is made to last with a durable 2 inch Polypropylene webbing, 2-ply leather ends and reinforced stitching. The colors will not bleed and the edges will not fray.

These durometers are available in Type a for use with soft rubber plastics and elastomers; Type D for use with hard rubber and plastics such as thermo plastics and flooring; and Type Micro a for materials as thin as 0.03". models are also available with NIST certificate. Mini-dial durometers are compact and easy to carry around the plant or take in the field for on-site testing. The small dial face measures only 1-5/8". scale is divided into 1 point increments from 0 to 100. The durometer holds maximum reading until reset. Ideal for testing hard-to-reach places or for out-of-sight testing. Measures 1-5/8"W x 5-5/8"H. Compliance: ASTM d-2240 did you know.. Type a has a flat cone point 35? included angle. Type D has a sharp cone point 30? included angle. Type Micro a has a sharp cone point 30? included angle. An easy way to Test hardness of rubber, plastic, and other nonmetallic materials.

These easy-fitting mens water shorts come in a durable, quick-drying nylon with the highest level of UV protection and a built-in mesh brief that dries ultra-fast so you can jump in and out of the water without needing to change.

These easy-to-use Swing-Away eyewash arms can be mounted for either right- or left-handed use. Chemical-resistant acetal heads have flip-top covers; self-adjusting regulators provide a constant flow of 2.4 gpm at 3 psi. Supply connection is 1/2" NPT(M). Polished-chrome plating. Compliance: ANSI Z358.1-2004 Swing eyewash arm over sink to automatically activate spray

These flasks can be used with thermometers calibrated for 76 mm immersion. Variety of Sizes Available Heavy-Duty Neck Available with mL Size ASTM Tests D86 and 47 Work with mL SizeThe sidearm of the mL flask is located about 137 mm from the bottom of the flask as required in ASTM E1405 and can be used in ASTM Tests D86 and 47. This size has a heavy-duty neck.

These flat 150mm Kimax dishes have approximately a 1200mL capacity with rims that are reinforced and fire polished to reduce chipping. Diameter: 150mm. Height: 75mm. Kimble #: 23000-15075.

These flat front men's from Ralph Lauren feature a stylish 2382. Made with a quality 100% wool fabric, and in a versatile brown color, these will quickly become your go-to pair of . This pair will match countless dress shirts and sportcoats, offering your wardrobe an updated look. Inseam is 30, allowing you to have your tailor hem them to your exact specifications.

These fun high waisted shorts features a 2.5" inseam and patches with basic 5 pocket styling and light whiskering throughout. The patches read "Love Me" and "All I Really Want is a New Adventure" WallFlower Jeans is a lifestyle brand that provides stylish looks from head-to-toe at an exceptional value. The brand offers jeans from Classic and Curvy to Plus Size options in a variety of washes. In addition to denim, they offer tops, dresses, outerwear, loungewear, sleepwear and intimate apparel, watches and jewelry.

These funnels are especially useful where filter paper would be attacked by the material being filtered. The disc should not be subjected to pressure differential in excess of 1 atmosphere. The top edge is beaded.

These fuse from Bussmann can help protect your equipment and home whenever an overload current occurs.With time delay fuse speed, 110A fuse amps, an interrupt rating of 300kA at 600VAC, 100kA at 300VDC, and lps-rk-sp series, this fuse is a must-have.As far as size goes, it is 1-19/32\ in diameter.It is a nonindicating fuse.The voltage rating is 600vac/300vdc.Functionally equal to Mersen/Ferraz Shawmut A6D-R

These GF/A glass microfiber filters offer fine particle retention and high flow rate, as well as good loading capacity. Used for high efficiency general purpose laboratory filtration, including water pollution monitoring of effluents, for filtration of water, algae and bacteria cultures, foodstuff analyses, protein filtration and radioimmunoassay of weak ? emitters. Recommended for gravimetric determination of airborne particulates, stack sampling and absorption methods of air pollution monitoring. Retention: 1.6?m. Diameter: 3.7cm. 100/Pack. Whatman #: 1820-037.

These GF/B glass microfiber filters are three times thicker than Whatman GF/A with higher wet strength and significantly increased loading capacity. Combines fine particle retention with good flow rate. Particularly useful where liquid clarification or solids quantification is required for heavily loaded fine particulate suspensions. Can be used as a finely retentive membrane prefilter. Used in LSC techniques where high loading capacity is required. Retention: 1.0?m. Diameter: 4.7cm. 100/Pack. Whatman #: 1821-047.

These hardwound roll towels offer the quality you expect to find in office break rooms, doctor offices and any area where you want to make a good impression. The unique design of this towel makes it the perfect companion to the SofPull automated touchless towel dispenser.

These heavy-duty, wide-mouth volumetric flasks are amber to protect your light-sensitive solutions. Wide neck allows up to 50mL pipette access. Flat bottom allows even stirring with standard stir bars. Each flask features large, permanent volume markings. Amber volumetric, Class A, glass stopper.

These high-speed steel chucking reamers come in sizes that fall between standard trade sizes, and their sizes are expressed in decimal inches from 0.2060 to 0.3755. Straight-flute reamers push chips forward into a hole as they enlarge it to an exact size for a precise fit when installing fasteners or other parts. They are the most commonly used style of reamer. These chucking reamers are made from high-speed steel and have a bright finish that is unaffected when their cutting edges are resharpened. The reamers' straight shank mounts to the chuck of a drill press or similar machining tool. High-speed steel chucking reamers provide good wear resistance in a wide range of reaming applications. These general purpose reamers have a straight shank that mounts to the chuck of a drill press or similar machining tool. Chucking reamers, sometimes called machine reamers, enlarge or finish an existing hole to an exact tolerance or size for a precise fit when installing fasteners or other parts. They usually have a 45? chamfer on the cutting edge to help ensure accuracy as the reamer enters the hole during metalworking tasks. This listing is for each. Technical Specification Item Chucking Reamer Measurement System Decimal Inch Reamer Size 0.286 Decimal Equivalent 0.286 Shank Type - Machining Straight Shank Dia. 0.286 Flute Type Straight Number of Flutes 6 Flute Length 1-1/2 Spiral Direction Neutral Coolant Fed Non-Coolant Through Overall Length 6 Material - Machining High Speed Steel Finish - Machining Bright (Uncoated) Cutting Direction - Machining Right Hand Primary Material Application All Materials Reamer Application Through Hole Size - Decimal 0.286 - 0.286

These high-speed steel chucking reamers come in sizes that fall between standard trade sizes, and their sizes are expressed in decimal inches from 0.2060 to 0.3755. Straight-flute reamers push chips forward into a hole as they enlarge it to an exact size for a precise fit when installing fasteners or other parts. They are the most commonly used style of reamer. These chucking reamers are made from high-speed steel and have a bright finish that is unaffected when their cutting edges are resharpened. The reamers' straight shank mounts to the chuck of a drill press or similar machining tool. High-speed steel chucking reamers provide good wear resistance in a wide range of reaming applications. These general purpose reamers have a straight shank that mounts to the chuck of a drill press or similar machining tool. Chucking reamers, sometimes called machine reamers, enlarge or finish an existing hole to an exact tolerance or size for a precise fit when installing fasteners or other parts. They usually have a 45? chamfer on the cutting edge to help ensure accuracy as the reamer enters the hole during metalworking tasks. This listing is for each. Technical Specification Item Chucking Reamer Measurement System Decimal Inch Reamer Size 0.294 Decimal Equivalent 0.294 Shank Type - Machining Straight Shank Dia. 0.294 Flute Type Straight Number of Flutes 6 Flute Length 1-1/2 Spiral Direction Neutral Coolant Fed Non-Coolant Through Overall Length 6 Material - Machining High Speed Steel Finish - Machining Bright (Uncoated) Cutting Direction - Machining Right Hand Primary Material Application All Materials Primary Material Application ISO Code H, K, M, N, O, P, S Reamer Application Through Hole Size - Decimal 0.294 - 0.294

These high-speed steel chucking reamers come in sizes that fall between standard trade sizes, and their sizes are expressed in decimal inches from 0.2060 to 0.3755. Straight-flute reamers push chips forward into a hole as they enlarge it to an exact size for a precise fit when installing fasteners or other parts. They are the most commonly used style of reamer. These chucking reamers are made from high-speed steel and have a bright finish that is unaffected when their cutting edges are resharpened. The reamers' straight shank mounts to the chuck of a drill press or similar machining tool. High-speed steel chucking reamers provide good wear resistance in a wide range of reaming applications. These general purpose reamers have a straight shank that mounts to the chuck of a drill press or similar machining tool. Chucking reamers, sometimes called machine reamers, enlarge or finish an existing hole to an exact tolerance or size for a precise fit when installing fasteners or other parts. They usually have a 45? chamfer on the cutting edge to help ensure accuracy as the reamer enters the hole during metalworking tasks. This listing is for each. Technical Specification Item Chucking Reamer Measurement System Decimal Inch Reamer Size 0.317 Decimal Equivalent 0.317 Shank Type - Machining Straight Shank Dia. 0.317 Flute Type Straight Number of Flutes 6 Flute Length 1-1/2 Spiral Direction Neutral Coolant Fed Non-Coolant Through Overall Length 6 Material - Machining High Speed Steel Finish - Machining Bright (Uncoated) Cutting Direction - Machining Right Hand Primary Material Application All Materials Primary Material Application ISO Code H, K, M, N, O, P, S Reamer Application Through Hole Size - Decimal 0.317 - 0.317

These high-speed steel chucking reamers come in sizes that fall between standard trade sizes, and their sizes are expressed in decimal inches from 0.2060 to 0.3755. Straight-flute reamers push chips forward into a hole as they enlarge it to an exact size for a precise fit when installing fasteners or other parts. They are the most commonly used style of reamer. These chucking reamers are made from high-speed steel and have a bright finish that is unaffected when their cutting edges are resharpened. The reamers' straight shank mounts to the chuck of a drill press or similar machining tool. High-speed steel chucking reamers provide good wear resistance in a wide range of reaming applications. These general purpose reamers have a straight shank that mounts to the chuck of a drill press or similar machining tool. Chucking reamers, sometimes called machine reamers, enlarge or finish an existing hole to an exact tolerance or size for a precise fit when installing fasteners or other parts. They usually have a 45? chamfer on the cutting edge to help ensure accuracy as the reamer enters the hole during metalworking tasks. This listing is for each. Technical Specification Item Chucking Reamer Measurement System Decimal Inch Reamer Size 0.319 Decimal Equivalent 0.319 Shank Type - Machining Straight Shank Dia. 0.319 Flute Type Straight Number of Flutes 6 Flute Length 1-1/2 Spiral Direction Neutral Coolant Fed Non-Coolant Through Overall Length 6 Material - Machining High Speed Steel Finish - Machining Bright (Uncoated) Cutting Direction - Machining Right Hand Primary Material Application All Materials Primary Material Application ISO Code H, K, M, N, O, P, S Reamer Application Through Hole Size - Decimal 0.319 - 0.319

These high-speed steel chucking reamers come in sizes that fall between standard trade sizes, and their sizes are expressed in decimal inches from 0.2060 to 0.3755. Straight-flute reamers push chips forward into a hole as they enlarge it to an exact size for a precise fit when installing fasteners or other parts. They are the most commonly used style of reamer. These chucking reamers are made from high-speed steel and have a bright finish that is unaffected when their cutting edges are resharpened. The reamers' straight shank mounts to the chuck of a drill press or similar machining tool. High-speed steel chucking reamers provide good wear resistance in a wide range of reaming applications. These general purpose reamers have a straight shank that mounts to the chuck of a drill press or similar machining tool. Chucking reamers, sometimes called machine reamers, enlarge or finish an existing hole to an exact tolerance or size for a precise fit when installing fasteners or other parts. They usually have a 45? chamfer on the cutting edge to help ensure accuracy as the reamer enters the hole during metalworking tasks. This listing is for each. Technical Specification Item Chucking Reamer Measurement System Decimal Inch Reamer Size 0.3590 Decimal Equivalent 0.3590 Shank Type - Machining Straight Shank Dia. 0.3590 Flute Type Straight Number of Flutes 6 Flute Length 1-3/4 Spiral Direction Neutral Coolant Fed Non-Coolant Through Overall Length 7 Material - Machining High Speed Steel Finish - Machining Bright (Uncoated) Cutting Direction - Machining Right Hand Primary Material Application General Purpose Reamer Application Through Hole Size - Decimal 0.3590 (0.3590)

These high-speed steel chucking reamers come in sizes that fall between standard trade sizes, and their sizes are expressed in decimal inches from 0.3765 to 0.8105. Straight-flute reamers push chips forward into a hole as they enlarge it to an exact size for a precise fit when installing fasteners or other parts. They are the most commonly used style of reamer. These chucking reamers are made from high-speed steel and have a bright finish that is unaffected when their cutting edges are resharpened. The reamers' straight shank mounts to the chuck of a drill press or similar machining tool. High-speed steel chucking reamers provide good wear resistance in a wide range of reaming applications. These general purpose reamers have a straight shank that mounts to the chuck of a drill press or similar machining tool. Chucking reamers, sometimes called machine reamers, enlarge or finish an existing hole to an exact tolerance or size for a precise fit when installing fasteners or other parts. They usually have a 45? chamfer on the cutting edge to help ensure accuracy as the reamer enters the hole during metalworking tasks. This listing is for each. Technical Specification Item Chucking Reamer Measurement System Decimal Inch Reamer Size 0.4125 Decimal Equivalent 0.4125 Shank Type - Machining Straight Shank Dia. 0.4125 Flute Type Straight Number of Flutes 6 Flute Length 1-3/4 Spiral Direction Neutral Coolant Fed Non-Coolant Through Overall Length 7 Material - Machining High Speed Steel Finish - Machining Bright (Uncoated) Cutting Direction - Machining Right Hand Primary Material Application All Materials Reamer Application Through Hole Size - Decimal 0.4125 - 0.4125

These high-speed steel chucking reamers come in sizes that fall between standard trade sizes, and their sizes are expressed in decimal inches from 0.3765 to 0.8105. Straight-flute reamers push chips forward into a hole as they enlarge it to an exact size for a precise fit when installing fasteners or other parts. They are the most commonly used style of reamer. These chucking reamers are made from high-speed steel and have a bright finish that is unaffected when their cutting edges are resharpened. The reamers' straight shank mounts to the chuck of a drill press or similar machining tool. High-speed steel chucking reamers provide good wear resistance in a wide range of reaming applications. These general purpose reamers have a straight shank that mounts to the chuck of a drill press or similar machining tool. Chucking reamers, sometimes called machine reamers, enlarge or finish an existing hole to an exact tolerance or size for a precise fit when installing fasteners or other parts. They usually have a 45? chamfer on the cutting edge to help ensure accuracy as the reamer enters the hole during metalworking tasks. This listing is for each. Technical Specification Item Chucking Reamer Measurement System Decimal Inch Reamer Size 0.414 Decimal Equivalent 0.414 Shank Type - Machining Straight Shank Dia. 0.414 Flute Type Straight Number of Flutes 6 Flute Length 1-3/4 Spiral Direction Neutral Coolant Fed Non-Coolant Through Overall Length 7 Material - Machining High Speed Steel Finish - Machining Bright (Uncoated) Cutting Direction - Machining Right Hand Primary Material Application General Purpose Reamer Application Through Hole Size - Decimal 0.414 - 0.414

These high-speed steel chucking reamers come in sizes that fall between standard trade sizes, and their sizes are expressed in decimal inches from 0.3765 to 0.8105. Straight-flute reamers push chips forward into a hole as they enlarge it to an exact size for a precise fit when installing fasteners or other parts. They are the most commonly used style of reamer. These chucking reamers are made from high-speed steel and have a bright finish that is unaffected when their cutting edges are resharpened. The reamers' straight shank mounts to the chuck of a drill press or similar machining tool. High-speed steel chucking reamers provide good wear resistance in a wide range of reaming applications. These general purpose reamers have a straight shank that mounts to the chuck of a drill press or similar machining tool. Chucking reamers, sometimes called machine reamers, enlarge or finish an existing hole to an exact tolerance or size for a precise fit when installing fasteners or other parts. They usually have a 45? chamfer on the cutting edge to help ensure accuracy as the reamer enters the hole during metalworking tasks. This listing is for each. Technical Specification Item Chucking Reamer Measurement System Decimal Inch Reamer Size 0.4240 Decimal Equivalent 0.4240 Shank Type - Machining Straight Shank Dia. 0.4240 Flute Type Straight Number of Flutes 6 Flute Length 1-3/4 Spiral Direction Neutral Coolant Fed Non-Coolant Through Overall Length 7 Material - Machining High Speed Steel Finish - Machining Bright (Uncoated) Cutting Direction - Machining Right Hand Primary Material Application General Purpose Reamer Application Through Hole Size - Decimal 0.4240 (0.4240)

These high-speed steel chucking reamers come in sizes that fall between standard trade sizes, and their sizes are expressed in decimal inches from 0.3765 to 0.8105. Straight-flute reamers push chips forward into a hole as they enlarge it to an exact size for a precise fit when installing fasteners or other parts. They are the most commonly used style of reamer. These chucking reamers are made from high-speed steel and have a bright finish that is unaffected when their cutting edges are resharpened. The reamers' straight shank mounts to the chuck of a drill press or similar machining tool. High-speed steel chucking reamers provide good wear resistance in a wide range of reaming applications. These general purpose reamers have a straight shank that mounts to the chuck of a drill press or similar machining tool. Chucking reamers, sometimes called machine reamers, enlarge or finish an existing hole to an exact tolerance or size for a precise fit when installing fasteners or other parts. They usually have a 45? chamfer on the cutting edge to help ensure accuracy as the reamer enters the hole during metalworking tasks. This listing is for each. Technical Specification Item Chucking Reamer Measurement System Decimal Inch Reamer Size 0.6350 Decimal Equivalent 0.6350 Shank Type - Machining Straight Shank Dia. 0.6350 Flute Type Straight Number of Flutes 8 Flute Length 2-1/4 Spiral Direction Neutral Coolant Fed Non-Coolant Through Overall Length 9 Material - Machining High Speed Steel Finish - Machining Bright (Uncoated) Cutting Direction - Machining Right Hand Primary Material Application General Purpose Reamer Application Through Hole Size - Decimal 0.6350 (0.6350)

These holders allow compatible strip brushes with rigid backing to be mounted in a variety of orientations in a conveying system to help maximize contact between the brushes and a conveyor. The brush's rigid backing slides into the channel in the holder, and the holder is then surface mounted using drilling or welding. The holder should be compatible with the backing height and width of the strip brush. Strip brushes are mounted along conveyors to direct and separate items on the conveyor and clean debris from conveyed items and conveyor belts and parts. They are available with rigid metal or flexible plastic backings and can be installed in compatible brush holders for mounting. When the brush is worn, a new brush can be installed in the holder. Brushes with shorter bristle filaments are stiffer, making them suitable for more aggressive applications such as deburring and heavy cleaning. Brushes with longer bristles are more flexible and are a good choice for gentler applications like positioning light objects or dusting. These products are commonly used on conveying systems in warehouses, package handling areas, manufacturing facilities, and distribution centers. They can also be used for non-conveyor applications such as a creating a barrier at the bottom of a door to keep out air, dust, or debris. This listing is for pkg. of 10. Technical Specification Item Strip Brush Holder Mounting Profile 50 Degrees Angle For Backing Height 3/16 For Backing Width 3/16 Backing Material - Brush Aluminum Mounting Flange Size 1 Overall Length 48

These holders allow compatible strip brushes with rigid backing to be mounted in a variety of orientations in a conveying system to help maximize contact between the brushes and a conveyor. The brush's rigid backing slides into the channel in the holder, and the holder is then surface mounted using drilling or welding. The holder should be compatible with the backing height and width of the strip brush. Strip brushes are mounted along conveyors to direct and separate items on the conveyor and clean debris from conveyed items and conveyor belts and parts. They are available with rigid metal or flexible plastic backings and can be installed in compatible brush holders for mounting. When the brush is worn, a new brush can be installed in the holder. Brushes with shorter bristle filaments are stiffer, making them suitable for more aggressive applications such as deburring and heavy cleaning. Brushes with longer bristles are more flexible and are a good choice for gentler applications like positioning light objects or dusting. These products are commonly used on conveying systems in warehouses, package handling areas, manufacturing facilities, and distribution centers. They can also be used for non-conveyor applications such as a creating a barrier at the bottom of a door to keep out air, dust, or debris. This listing is for pkg. of 10. This item requires special shipping, additional charges may apply. Technical Specification Item Strip Brush Holder Mounting Profile H-Shaped For Backing Height 3/16 For Backing Width 3/16 Backing Material - Brush Stainless Steel Mounting Flange Size 1 Overall Length 60

These hydrometers conform to the accuracy requirements for ASTM hydrometers. Scales are affixed with clear epoxy. Each hydrometer is calibrated in a triple accredited ISO/IEC 17025:2005, A2LA accredited laboratory against equipment whose calibration is traceable to NIST. Individually packaged with a multi-language Statement of accuracy indicating accuracy traceable to NIST. Nist traceable. Temperature of standardization 60?F/60?F . Conform to ASTM specifications. Metal ballast.

These instruments have been designed to indicate temperature and pressure in a single unit. With a price that makes this an affordable option for applications where bronze internals are suitable for use, the use of a single 'tridicator' saves time during installation, amount of piping required and of course saves money versus using separate gauges and thermometers. The primary applications for this product are hot water boilers and water heaters.

These ISM - Intelligent Sensor Management electrodes models store calibration data and automatically transfer the data to your meter. Choose open junction versions for dirty and complex samples. Cables not included with all electrodes. For additional versatility?select the one that connects to your meter. ISM technology stores calibration data in the sensor and automatically transfer it to the meter. Open junction provides easy cleaning and clog-free measurements. ARGENTHAL reference system has a silver ion trap, for silver-ion-free electrolyte. No clogging junction from sulfides or protein binding?perfect for biological samples and TRIS buffers. Expertly-engineered probes to cover a wide range of applications ISM - Intelligent Sensor Management?ARGENTHAL reference system?Open junction works well for dirty and complex samples

These ISM - Intelligent Sensor Management electrodes models store calibration data and automatically transfer the data to your meter. Choose open junction versions for dirty and complex samples. Cables not included with all electrodes. For additional versatility?select the one that connects to your meter. ISM technology stores calibration data in the sensor and automatically transfer it to the meter.?Select the appropriate sensor cable for your application, meter, and ATC connection?BNC, waterproof BNC, DIN, and Lemo OO cables available with banana or RCA (cinch) connectors. ?Sleeve junction provides fast results and works best in dirty samples. Special low-temperature glass membrane (LoT) is ideal for working with low temperature and low ionic strength samples. Expertly-engineered probes to cover a wide range of applications ISM - Intelligent Sensor Management?Cable not included?LoT membrane for low temperature and ionic strength samples

These ISM - Intelligent Sensor Management electrodes models store calibration data and automatically transfer the data to your meter. Choose open junction versions for dirty and complex samples. Cables not included with all electrodes. For additional versatility?select the one that connects to your meter. Select the appropriate sensor cable for your application and meter?BNC, waterproof BNC, DIN, Lemo OO, and wire-only cables available. SteadyForce reference is pressurized to 3 bar to ensure electrolyte flow?even in viscous samples. High alkali glass membrane provides low-alkali error?ideal for high pH and high temperature applications. Expertly-engineered probes to cover a wide range of applications Cable not included?HA glass membrane for high pH and temperature applications

These kids' waterproof boots are inspired by the original Timberland boots, with the same rugged outdoor styling and hard-wearing construction. These are built to protect kids' feet through puddles, rain, mud and whatever else gets in their way.

These Kimax cylinders (formerly Exax) have a durable blue ceramic enamel scale. A ground glass joint glass stopper is supplied. Heights given below do not include the stopper. Designed from ASTM Specification E1272, Style 2 Class B, requirements. Replacement stopper is 41900R. Cap: 50mL. Graduated Interval: 3 to 50. 24/Case. Kimble #: 20040-50.

These laboratory conductivity cells are all dip style with shaft materials ranging from plastic to metal to glass, and graphite, stainless steel, or platinum electrode bands. Common shaft diameter of 12 mm is compatible with most electrode holders. Rugged IP67-rated cells are preferred for outdoor and industrial use. Intelligent Sensor Management (ISM) conductivity cells feature onboard electronic memory that stores calibration data, unique identification number, and temperature history. When connected to your compatible conductivity meter, the sensor is automatically recognized and the stored data uploads to the meter for immediate use, saving time and preventing errors. Outstanding performance for any application Integrated temperature compensation sensor ensures measurements are accurate Choose from a variety of materials and cable lengths to suit your requirements

These leach-resistant bottles are excellent for long-term storage of solvents and trace analysis standards. Available in standard neck and wide mouth versions.

These light-duty rigid-frame skate wheel conveyors are made from steel. They are stronger than rigid-frame skate wheel conveyors made from aluminum and provide better resistance to abrasion and impacts. Rigid-frame skate wheel conveyors allow loads with firm, flat bottoms to roll along the conveyor from one place to another, reducing the effort it takes to move the loads in assembly lines, shipping departments, and stocking areas. They are available in straight and curved sections, also called conveyor sticks, that can be connected to create a conveyor system that moves items along the most optimal path. Each section must be supported by compatible conveyor stands. The number and spacing of the stands used to support the conveyor section will affect its capacity. Skate wheel conveyors consist of small skate wheels mounted on a series of axles attached to rigid or flexible frames. The wheels let boxes, totes, and other loads with firm, flat bottoms roll along the conveyor from one place to another, reducing the effort it takes to move the loads. These unpowered (gravity-flow) conveyors use a downward slope or a manual push to move loads down the line. Compared to roller conveyors, skate wheel conveyors need less force or slope to move loads and are better at maintaining the orientation of loads as they move around curves. The conveyors' wheel density impacts the size of the loads that can be conveyed on them. The smallest item on the conveyors should be supported by at least five wheels on three axles at all times. Gate kits and transition sections can be used to customize the conveyors. Skate wheel conveyors can be reconfigured for temporary applications and are often used in warehousing, manufacturing, package handing, and distribution tasks. This listing is for each. Technical Specification Item Skate Wheel Conveyor Conveyor Frame Type Rigid Frame Shape 90 Degrees Curved Maximum Load Capacity 260 lb./ft. (5 ft. Supports) Load Capacity @ 5 ft. Centers 260

These lightweight and convenient safety glasses fit over prescription glasses. The clear, scratch-resistant Ultrapure hard coated polycarbonate lenses resist impact and absorb 99.9% UV rays. The patriot frames encase a 145mm wide, single-piece, polycarbonate lens adjusts easily to three positions. Molded-in side shields and brow guard add extra protection above and around eyes. Temple length adjusts to four different lengths to provide a comfortable fit for just about anyone. Temple ends have a patented duo flex feature for improved comfort behind the ears. ANSI Z87.1-1989. CSA Z94.3.

These lightweight, general purpose wire strippers feature precision form-ground, knife-type blades that give an accurate and easy strip every time. All models have a built-in wire cutter, looping holes, and cushioned plastic grips.

These molded-case circuit breakers are designed for use in industrial enclosures, panelboards, switchboards, busway plug-in units, combination starters, and motor control centers. This listing is for each. _DELETE_

These multi-channel electronic pipettors feature a soft-touch pipetting key, contoured handle, adjustable finger rest, and improved tip cone to reduce the operational forces needed for use. The prestigious TUV testing service, an OHSA-accredited independent testing lab, has given these electronic pipettors the ?ergonomic approved? Certification. Large LCD screen clearly displays all settings. Each function has a dedicated control to reduce inadvertent volume changes or tip ejection. Operating modes include standard pipetting, sample mixing, reverse pipetting, electrophoresis gel, and dispensing. Rechargeable battery provides over 4000 pipetting cycles on a singe charge. Units can be disassembled for cleaning and pipette shaft may be removed and autoclaved for decontamination or use in ster what's included: rechargeable battery and 110 VAC charger/power supply with us plug the first electronic pipettors to be awarded the ?ergonomics approved? Certification! microprocessor control for precise volume delivery choose from five convenient operating modes to improve productivity ?gel? mode discharges slowly for electrophoresis gels easily disassembled for thorough cleaning.

These opaque leakproof bottles are excellent for storing photosensitive materials, either liquid or solid. A LDPE neck insert plug provides maximum security. The easy grip LDPE screw closure contains tag holes and may be wired securely to either of 2 shoulder holes. Sloping shoulders reduce any possibility of residue deposits. Suitable for food grade products.

These pigskin gloves feature high abrasion resistance and heat protection. The natural material is flexible, tanned to resist moisture, and won't stiffen when wet. The gloves also have an ergonomic keystone thumb with shield and shirred wrist, and a gunn cut to resist wear and enhance comfort. Leather Gloves, S/7, PR This product contains a chemical that is regulated under California Proposition 65. Warning: This product contains a chemical known to the State of California to cause cancer. Warning: This product contains a chemical known to the State of California to cause birth defects or other reproductive harm. -

These pipettes are made from borosilicate glass in compliance with ASTM specification E-969. Color-coded. Individually serialized and certified. Calibrated to deliver. Printed with durable amber markings.

These pipettes are made specifically for accuracy and precision, with proven reliability?the robust construction comes with a lifetime warranty. The built-in de-tipping mechanism saves you time when removing pipette tips. All MLA D-Tipper pipettes are engraved with serial numbers to faciliate traceablilty and calibration reporting for easy quality control. These pipettors come factory calibrated and tested at 21.5?C ?2?C using distilled water. Pipette calibration volume can be changed using the calibration key (included). The body of the pipette is color coded for easy volume identification. Slim tapered design enables access to narrow diameter tubes and is comfortable even for small hands. Smooth one-stroke action yields reproducible results and requires minimal exertion. Optimal accuracy and performance for routine tasks Built-in tip ejector eliminates manual tip removal. Glove guard ensures user safety and won?t catch or tear during tip removal. Each pipete features an engraved serial number for quality control

These pipettors feature tightly fitting polyethylene plungers that cleanly expel even viscous or foamy fluids. This design helps provide almost perfect reproducibility. A simple lever locks the volume setting and ensures that you are always dispensing your intended volume. What's Included: quality certificate. Precision design provides excellent reproducibility even with your difficult to dispense solutions.

These plasma-treated tissue culture flasks are made of high-quality polystyrene for optical clarity and distortion-free examination The vacuum-gas plasma treatment ensures a consistent growth surface providing optimum cell attachment and maximum yield. Straight-neck and canted-neck flasks are supplied with a choice of plug-seal caps, for use in open or closed incubation, or rigid, phenolic lined caps that spin on. All flasks, except for 291-7 and -, have a frosted writing area to make labeling fast and easy. Graduations are easy to read in a hood. Flasks are sterilized by gamma irradiation and nonpyrogenic. Ordering information: Accessories not included.

These polypropylene acid storage cabinets contain no metal parts- they won't corrode or rust. Constructed of 3/8 inch (0.96 cm)-thick white polypropylene, cabinets feature plastic hinges and welded interior seams to prevent leakage. All cabinets include hazard warning Label. Compliance: OSHA liquid tight to prevent leakage.

These polystyrene plates have a consistent tissue culture surface chemistry produced by using vacuum-gas plasma treatment Each plate features a patented low evaporation lid, deep wells, serrated gripping panels, a large writing patch, and alphanumeric well identification. Sterilized by gamma irradiation. Exceptional optical clarity allows for visualization of cell monolayers. They are designed for manual and automated handling. Plates can be stacked together for efficient use of incubator space. Ordering information: Plates with lids are packaged in peel-apart packaging to assure sterile delivery. Plates 21-002, 21-004, and 21-006 feature a ready-stack bulk tray, which is designed to handle a large number of plates aseptically.

These PTFE Disk septa are chemically inert. PTFE Red Rubber septa are economical for many GC applications. These PTFE/Silicone septa are most popular for HPLC and IC applications. Pre-slit septa are easier to pierce with thin gauge needles.

These puncture resistant, steel receptacles bring a contemporary and stylish look to any room. Bottom is recessed 1" to provide air circulation in the event of fire. Rubber rib on top and bottom of basket helps to prevent from scuffing. The PVC clear plastic liner (included) prevents waste content from spilling.Length 11 3/4"diameter.

These PYREX tubes contain a full length 24/40 Standard Taper inner joint.

These Pyrex volumetric flasks provide improved lab convenience, broad selection and precise volume measurement. The strength of these flasks has been increased appreciably through machine-blown bodies to which are sealed heavy-tubing necks tooled for no. 13 standard taper glass stoppers. The graduation line is sharp and permanent and large white block letters make the inscription easy to read. These Class a volumetric flasks have been manufactured to Class a tolerances as established by ASTM E- 694 for volumetric ware, ASTM e-542 for calibration of volumetric ware and ASTM e-288 for volumetric flasks.

These PYREX wide mouth Erlenmeyer flasks are especially recommended for use as titration flasks and are designed with heavy duty rims to reduce chipping. For convenience, these flasks are graduated in durable white enamel to show the approximate capacity and have an extra large marking spot. Their uniform wall thickness provides the proper balance between mechanical strength and thermal shock resistance.

These racks are similar to 9259J65 series, but are half the size to accommodate tubes up to 25 mm diameter. They have a 4 x 4 array and are molded of glass-reinforced polyketone. The racks? thermal properties allow for both autoclaving and freezing. The three-tier design is molded in one-piece, and the lower tier is suitable for 28 and 30 mL Nalgene? Oak Ridge Centrifuge Tubes.

These replacement vinyl liners fit into compatible basket trucks and can be used to replace dirty or damaged liners in the trucks. Vinyl liners are flame-retardant and stronger than canvas liners. They resist mold, mildew, and tears and withstand exposure to UV rays. These liners are for use with specific models of basket trucks. These accessories include products for maintaining or enhancing bulk container trucks and tilt trucks. They may be used to replace existing parts on the trucks when they become worn or damaged. They can also be used to add additional functionality to the trucks, to expand the storage capacity of the trucks, or to secure the trucks' contents. This listing is for each. For Use With Grainger Item Number : 2END1 Fits Brand : Royal Basket Trucks Overall Width : 32 For Use With : 2END1 Cubic Yard Capacity : 0.88 cu. yd. Overall Length : 60 Cubic Foot Capacity : 23.9 cu. ft. Includes : Rope Bushel Capacity : 19.2 Color - Hoppers and Cube Trucks : Yellow Item - Basket Truck Accessories : Replacement Liner Item : Replacement Liner Container Height : 23 Container Material - Hoppers and Cube Trucks : Vinyl For Use With Mfr. Model Number : G60-YYW-EXE-4UNN Country of Origin (subject to change) : United States

These replacement vinyl liners fit into compatible basket trucks and can be used to replace dirty or damaged liners in the trucks. Vinyl liners are flame-retardant and stronger than canvas liners. They resist mold, mildew, and tears and withstand exposure to UV rays. These liners are for use with specific models of basket trucks. These accessories include products for maintaining or enhancing bulk container trucks and tilt trucks. They may be used to replace existing parts on the trucks when they become worn or damaged. They can also be used to add additional functionality to the trucks, to expand the storage capacity of the trucks, or to secure the trucks' contents. This listing is for each. For Use With Grainger Item Number : 8DT86 Fits Brand : Royal Basket Trucks Container Material - Hoppers and Cube Trucks : Vinyl Cubic Foot Capacity : 17.4 cu. ft. Overall Length : 40 Color - Hoppers and Cube Trucks : White For Use With : 8DT86 For Use With Mfr. Model Number 0 Item : Replacement Liner Cubic Yard Capacity : 0.64 cu. yd. Overall Width : 28 Item - Basket Truck Accessories : Replacement Liner Container Height : 27-1/2 Country of Origin (subject to change) : United States

These replacement vinyl liners fit into compatible basket trucks and can be used to replace dirty or damaged liners in the trucks. Vinyl liners are flame-retardant and stronger than canvas liners. They resist mold, mildew, and tears and withstand exposure to UV rays. These liners are for use with specific models of basket trucks. These accessories include products for maintaining or enhancing bulk container trucks and tilt trucks. They may be used to replace existing parts on the trucks when they become worn or damaged. They can also be used to add additional functionality to the trucks, to expand the storage capacity of the trucks, or to secure the trucks' contents. This listing is for each. Overall Length : 70 in Cubic Yard Capacity : 1.0 cu yd Includes : Nylon Rope Fits Brand : Royal Basket Trucks For Use With Grainger Item Number : 2END3 Bushel Capacity : 22.3 bu Color - Hoppers and Cube Trucks : Blue Item : Replacement Liner For Use With : Extractor Trucks (EX) Cubic Foot Capacity : 29.8 cu ft Item - Basket Truck Accessories : Replacement Liner Container Material - Hoppers and Cube Trucks : Vinyl For Use With Mfr. Model Number : G70-BBW-EXE-4UNN Container Height : 23 in Overall Width : 32 in Color : Blue Material : Vinyl Overall Height : 23 in Overall LxWxH : 70 in x 32 in x 23 in Shop By : New Low Price Country of Origin (subject to change) : United States

These rupture-resistant bottles are extremely rigid and feature a wide-mouth opening for easy filling and emptying of liquids and powders. The deep threaded neck allows the screw cap to seal on tight, offering exceptional leak-resistance especially during shipping. This bottle is approved for use with food products.

These safety-vented wash bottles provide compliance with the Globally Harmonized System (GHS) of Classification and Labeling of Chemicals and OSHA?s HazCom 2012 requirements. These wash bottles are pre-printed with the chemical name and formula, GHS pictogram and signal word, National Fire Protection Association (NFPA) Section 704 four-color diamond, health hazards, Chemical Abstract System (CAS) number, and suggested protective clothing and equipment. Bottles with labels that do not indicate a hazardous chemical do not have/require GHS pictogram or signal word. These bottles are Deionized Water, Distilled Water, Isotonic Saline, and Water. These wash bottles feature a unique venting valve which prevents pressure build-up, eliminating potentially dangerous chemical drips. This feature also allows dispensing of the wash bottle in an upright or inverted position. The methyl ethyl ketone and toluene do not include vented valve. Available in a 4-piece assortment pack which includes one each of Acetone, Isopropanol, Bleach, and Ethanol bottles. Eliminate spout dripping with built-in safety vent Quick identification of contents with color-coded caps and chemical identification label Fill bottles easily with wide-mouth design Compliant with OSHA regulations Excellent chemical compatibility with LDPE bottle and polypropylene (PP) cap

These San Jamar Standard Tray is a replacement part for their Dome & Mini Dome Condiment & Garnish Centers. It has a 1 Quart capacity and is chillable.Standard tray Chillable For use with Dome & Mini Dome Condiment & Garnish Centers Model #: BD106 6029211

These shelves are ideal for maximizing storage and organization above sinks, stoves, tables, etc. Designed with solid strip brackets that allow you infinite installation capabilities.;.

These signs are intended to indicate potential, type, and degree of the hazard that may lead to accidental injury or property damage. Signs define specific hazards by conveying a clear, easily understood message. The sign headers and colors used in accident prevention safety signs are specified by OSHA and ANSI to designate the severity of the hazard. Each color has a specific role. DANGER (red): indicates an imminently hazardous situation which, if not avoided, will result in death or serious injury. Protect your workers by clearly displaying possible chemical hazards.

These single metric scale cylinders are calibrated ?to contain?. The scale marked in white enamel is clearly visible. The 10-mL size has a funnel top. Bumper guards are supplied with 25-mL through 2000-mL cylinders. The 100-mL size is made in accordance with ASTM E-133 and E-1272. Double metric scale. Class A

These SPANX shorts feature double-layer compression to smooth the tummy, hips, and rear.

These specially blown, sturdy, approximately 12.3L PYREX round bottom bell jars have a fine ground finish at the open end. The jar is supplied without a bottom rim flange. The flat ground bearing surface has a contact area equal to the wall thickness at the open end of the jar. -Warning: do not use with heat, pressure or vacuum applications.

These spot plates have three depressions 21mm x 7mm deep. Tray is 28mm x 85mm. Made of low density polyethylene and will withstand temperatures to 80 C.

These standard style taps have straight flutes of a number specified as either standard or optional. Hand taps are for general purpose applications such as production tapping or hand tapping operations. Plug and bottoming styles provide versatility in tough materials, blind and through holes. Plug chamfer is best suited for through holes or where there is sufficient room at the bottom in blind holes, whereas bottom chamfer is designed to tap to the bottom of the hole. These taps are proudly made in the USA.

These steel dockboards are constructed of High Strength (55,000 psi) Steel for long life. Beveled edges on both ends permit smooth entry and exit. Deck is checkered for safe efficient use. Locking legs minimize ramp movement. Available in widths of 60 & 72 inches, capacities range from 12,000-20,000 . (More sizes and capacities available. Call for details.) Standard with Lever lift for help with portability. Locking legs are uneven to allow the dockboard to sit canted for easier pick-up by fork trucks. - - Please Note: If using a three-wheeled lift truck with these dockboards, please be sure to order a dockboard with at least 20% more capacity than the lift truck due to concentrated load on center of board. - - Features Include: - High Strength 55,000 psi Steel Treadplate. - Beveled Edges for Smooth Entry & Exit - Treadplate Design ensures maximum traction - Lip length is 9

These straight-flute thread mills have a bright finish that provides a smooth, polished surface. They are suitable for general purpose applications at slower speeds in nonferrous materials. Carbide thread mills offer excellent wear resistance, heat resistance, and hardness. Straight-flute thread mills are suitable for general purpose thread-milling applications. They provide good strength but require a rigid machine setup. Straight-flute thread mills create threads of the same pitch in a range of hole diameters, eliminating the need to change tools when threading multiple holes of different sizes. Thread mills are only usable in CNC machines that have helical interpolation capability. This listing is for each. Cutting Dia. : 0.235 Shank Dia. : 1/4 in Item : Thread Mill Cutting Dia. (In.) : 0.235 Nomenclature : TM Type : Straight, Internal Size : 5/16 Length of Cut : 0.6600 in Finish : polished End Mill Material : Carbide Flutes : 3 Pitch : 40 TPI Thread Size : 5/16-40 Overall Length : 2-1/2 in For Use With : - Thread Type : Inch Length of Cut (In.) : 0.660 Application : All Types of Metals, Composites and Tough-to-Machine Materials Overall Length (In.) : 2.5 Shank Length : 1.8400 in Drilling Tool Configuration : Individual Number of Flutes : 3 List Number : TM Material - Machining : Carbide Measurement System : Fractional Inch Cutter Dia. - Machining : 0.2350 Material Applications : Composite, Steel Primary Material Application : All Materials Finish - Machining : Bright (Uncoated) Flute Type : Straight Cutter Dia. : 0.2350 in Series : SPTM Thread Standard : UN Country of Origin (subject to change) : United States

These stroboscopes are designed for quality control, motion analysis, vibration problems, maintenance work, experiments in engineering school projects, production line checks, examination and speed measurement of motors under various loads, gear movement and engagement, alignment of parts, cams, propellers, fan blades, centrifuges, spindles, turbines and other machinery exhibiting repetitive motion. They also can provide pertinent information on the motion of vibrating parts, oil leaks, liquid spray patterns and a host of other industrial and scientific applications. Unique instruments for the printing industry to check color registration, ink integrity, clarity, etc. They feature phase shifting, floating decimal point and LED digital display, slave functions and manual flash rate control. As electronic digital tachometers, they measure RPM without contact or special markings. FEATURES Available as Strobe KIT Plastic housing with strength members Phase shift External trigger Unique rotary pulse indicator Lightweight design (only 2.75 lb. for DT-725).

These stroboscopes feature a pistol-grip handle with a latching trigger and a 1/4?20 threaded bushing for extended ?hands-free? tripod mounting. High flash energy allows measurements in bright areas. Select standard or phase?shifting models according to your application. Phase-Shifting Stroboscope Stroboscope shifts in .1? increments?view different parts of moving machinery with higher resolution and accuracy. Adjust readings by as little as 0.01 fpm. Store and recall nine full flash rate settings in nonvolatile memory?unit remembers last setting before shutoff. Set stroboscope for internal mode or external mode (input signal from TTL to 24 V). External mode features two delay functions?phase angle delay and time delay with resolution to 0.1? and 0.00001 seconds. What?s Included: a 6-ft (1.8-m) power cord (115 VAC models include plug only) (115/230 models include battery recharger), and an NIST-traceable calibration report supplied by the manufacturer. Phase-shifting stroboscope kits include: a battery recharger/AC power supply that allows continuous operation, a spare lamp, and a carrying case. Phase shifting models let you use your stroboscopes continuously View different parts of moving machinery

These sturdy, versatile tie wires are efficient for indoor and outdoor jobs. Made of stainless steel or black annealed finish, the tie wires are essential for fastening items together. Wires have a high level of strength and are capable of handling heavy items.

These superior quality graduated cylinders are ideal for the safe and accurate measurement of all types of liquids. Our cylinders offer a wide rim and a tapered pour spout for easy filling and pouring. The non-wetting interior surface eliminates concave menisci, providing more accurate measurements. The wide pentagonal shaped base provides stability and makes the cylinder roll-resistant. The heavy-duty plastic withstands repeated autoclaving. Switching from glass cylinders to Globe's plastic equivalents will greatly reduce breakage and the potential for injury.

These superior quality Griffin beakers are ideal for all general laboratory procedures. In one beaker you can mix, measure and prepare solutions. Our Griffin beakers have a low-form and a tapered pour spout to facilitate the transferring of liquids without dripping. The heavy-duty plastic withstands repeated autoclaving. Switching from glass beakers to Globe's plastic equivalents will greatly reduce breakage and the potential for injury.

These Teflon coated fry pans incorporate only DuPont certified finishes. The chrome plated steel handles are attached with three non-stick coated rivets making the interior a completely uniform non-stick surface.

These test tubes are ideal for a wide range of laboratory applications. They are available in several sizes, and from two materials, to meet a wide variety of needs.

These Test tubes are well annealed, resistant to heat and chemically stable. Rims are fire-polished. The 25 mm OD tube does not have a marking spot.

These trash pump suction strainers keep large solids from blocking the pump's inlet or jamming the pump mechanism. They also screen out solids that should not be drained with the water.Remote-location engine-driven trash and utility pumps are gasoline powered so they don't need to be placed near an electrical outlet, and they run for long periods of time between refueling. Remote-location electric trash and utility pumps start instantly, require no fuel to operate like gasoline-powered pumps, and don't generate gas vapors so they can be used in enclosed areas. Remote-location pump heads are pump devices without a motor/engine or frame that allow replacement of defective pump heads without also having to replace the existing pump motor/engine. Trash pump suction strainers keep large solids from blocking the pump's inlet or jamming the pump mechanism. Trash pump wheel kits allow large remote-location pumps with a frame to be moved and wheeled about like a cart without having to lift the entire pump off the ground. Suction Strainer, 3" FNPT, Side Square This product contains a chemical that is regulated under California Proposition 65. Warning: This product contains a chemical known to the State of California to cause cancer. Warning: This product contains a chemical known to the State of California to cause birth defects or other reproductive harm. -

These trollies have been designed to quickly install on virtually any S, H,W and M type I-beam. The width of the trolley is adjusted by rotating the center rod with lifting eye clockwise or counterclockwise. Geared trolley is ideal for use when precise positioning of the trolley is required. The trolley includes four rollers with sealed bearings for long life. A lifting eye is located at the bottom of the trolley for attaching a hoist (not included). Steel construction and painted finish. Headroom is measured from the bottom of wheel to bottom of hooking eye.

These tubes have been designed for the storage and transportation of biological material. They are manufactured from non-toxic polypropylene and offer strength and clarity. The vial has external threads, which provide a smooth and uniform inner surface which reduces the risk of contamination.

These two-piece, quality ratchet tie downs have a 12" long fixed end length with the other length being adjustable. Pump handle to tighten tie down securely around load. Positive ratchet action avoids accidental release.

These ultra high gloss black Navy oxfords have an easy to care for mirror finish Poromeric uppers. They also have oil resistant polyurethane outsole, Goodyear welt construction and are light weight and comfortable. Most sizes.

These unique,patented bits were designed to tackle a variety of materials - drywall,FIBEROCK,wood,wall tile,cement board,and more. ZIP BITS allow you to cut material up to 1" thick.

These units are premier tools for protein concentration and desalting. Typical applications include purifying macromolecular components from tissue culture extracts or cell lysates and concentrating biological samples. Low-binding regenerated cellulose membrane, fast processing, and >90% recoveries Unique vertical housing Designed with 15-mL volume and 10,000 Nominal molecular weight limit (NMWL)

These universal fit pipette tips are suitable for use with Gilson PipetMan and other pipettors. Various sizes, colors and packaging configurations are available.

These user-friendly balances feature Super Hybrid Sensor (SHS) technology which improves response speed, accuracy, and minimizes costs. SHS combines the best of magnetic force restoration and single point parallelogram load sensing technologies. Its unique design provides the fastest response speed in its class ? just one second. The GX Apollo series toploading balances also provide innovative features for advanced operation. Electronically controlled Load (ECL) performs a self-diagnostic test preceded by an internal repeatability test of you balance without an external weight. The standard deviation (SD) check allows for daily precision checks ? ideal for SOPs. The Min-S alert ensures that that balance is operating within USP41 compliance. Impact shock detection (ISD) visually and audibly indicates the magnitude of impacts shocks. The balance will then document the date, time, and shock level to provide real-time feedback and prevent damage of the sensor. Flow rate display (FRD) enhances accuracy and precision of dosing and filling applications. FR-Cal calculates, displays, and outputs the mass or volume flow rate of your dispensing application via density. The comparator then provides feedback if the flow rate is within desired limits. The tare values are then stored in nonvolatile memory if an application was interrupted. Super Hybrid Sensor (SHS) technology offers fastest response time in its class ? one second! Streamline your dosing and filling applications with flow rate display (FRD) Never lose data again ? store weighing data in non-volatile memory Complementary WinCT software supports data collection and statistical analysis Save power with the auto power-off function after 10 minutes of inactivity Internal calibration saves time and money with quick calibration Automatically self-calibrates when ambient temperature changes are detected Calibrate on-demand with one-touch automatic calibration Password-protection up to 11 users and 1 adm

These versatile and industrial-strength heaters can be used on a wide range of surfaces and environments due to their flexibility, moisture/chemical resistance, and ruggedness. They easily install on everything from laboratory vessels to large vats and tanks - ideal for solving viscosity, freeze protection, and process control heating applications. The unique grounded heating element is laminated between two layers of extra strong 20Mil fiberglass reinforced silicone rubber. Heaters for metal surfaces have faster heat-up rates due to the 2.5 Watts/in2 power density. What's included: 4-foot long silicone rubber power leads. Rugged, moisture/chemical resistant flexible heaters provide uniform heat distribution across large surface areas maximum exposure temperature of 450?f (232?c) easy-to-apply industrial strength pressure sensitive adhesive backing.