Brand: SMC Products (Page 2)

Flame resistant, one-touch fitting series KR can be used for a wide range of pressures from a low vacuum up to a pressure of 145 PSI. The use of a special profile ensures positive sealing and reduced resistance when the tube is being inserted. KR fittings are effective when piping in a confined space. The body and threaded portion can turn.<ul><li>Effective when piping is in a confined space</li><li>Release collar allows easy removal of tubing without damaging the tube</li><li>Ideal for areas where weld splatter is generated</li><li>Flame resistant material</li><li>Maximum operating pressure of 1.0MPa</li></ul>

FLUOROPOLYMER, VALVE

From our inventory we are selling a New SMC NVV5K3-20-04-00T Manifold, 4-Stations, For 5-Port Valves. Specifications: Model #: NVV5K3-20-04-00T More Information: New Manifold 4-Stations For 5-Port Valves

From our inventory we are selling a SMC ISE30A-01-C Digital Pressure Switch, 2-Color Display, 12-24VDC 80mA. Specifications: Model #: ISE30A-01-C More Information: Digital Pressure Switch 2-Color Display Power: 12-24VDC 80mA Pressure Range: -0.100 to 1MPa (-14 to 145psi) Output: NPN Open Collector 1 Output Voltage Output: 0.6 to 5V Fitting: R1/8 (M5 Female Threaded) *No Cable or Connector*

From our inventory we are selling an SMC Pneumatic Regulator. Specifications: Model #: IR2000-N02BG More Information: Input Pressure (max): 150 PSI Output Pressure: 0.7-30 PSI Port Size: 1/4" NPT Gauges May Vary

From our online store inventory, we are selling an SMC Pneumatic Regulator. Specifications: Model #: NAW2000-N01-C

In good condition

Inch size nylon tubing, series TIA for general air is available as standard in black or white, 20 meter rolls. Additional colors and roll sizes are available upon request.

JB25-6-100

KF insert fittings are suitable for use with nylon, soft nylon and polyurethane types of tubing. The insert mechanism provides reliable retaining force on both sides of the tube (inside and outside). The KF series can used for a wide range of pressures from vacuum up to a pressure of 1.0MPa.<ul><li>Suitablefor use with nylon, soft nylon and urethane tubing</li><li>Large retaining force</li><li>Low tightening torque</li><li>Wide range of pressures from vacuum up to 1.0MPa</li></ul>

KQ uni-fit one-touch fittings only require hand tightening to assemble and a snug of the wrench to attain a positive seal in 1/3 of the time of conventional fittings. The innovative design allows use of uni-fit one-touch fittings with NPT, NPTF, RC(PT), and G(PF) threads making the uni-fit design both versatile and time saving. KQ fittings give you identical heights when used in manifolds or other side by side applications enhancing the appearance of your equipment.  KQ fittings are available to order in multiples of 10.The current KQ series fitting has been discontinued. SMC has introduced an improved version of KQ2 series, and recommends that you utilize the new series for your product designs. <ul><li>The KQ series has been discontinued, please see the New KQ2 series </li><li>One-touch fittings, metric size </li><li>Connection thread: M, R(PT), Rc(PT) </li><li>Body color: black </li><li>Release button: blue </li><li>Tube material: nylon, soft nylon, polyurethane </li></ul>

KQ2 one-touch, metric and inch size fittings are available in a wide variety of sizes, body styles and thread types. The specially designed packing provides positive sealing under pressure without the reduced flow common with compression fittings. The KQ2 release collar releases both the chuck and collet to provide a low disconnection force for easy removal of the tubing. KQ2 fittings are available to order in multiples of 10.The current KQ2 series fitting has been discontinued. SMC has introduced an improved version of KQ2 series, and recommends that you utilize the new series for your product designs. <ul><li>Accepts nylon and urethane tubes</li><li>Applicable for both vacuum and positive pressure applications</li><li>Release collar allows easy removal of tubing without damaging the tube</li><li>Maximum vacuum pressure of 1.0MPa</li></ul>

KQ2 one-touch, metric and inch size fittings are available in a wide variety of sizes, body styles and thread types. The specially designed packing provides positive sealing under pressure without the reduced flow common with compression fittings. The KQ2 release collar releases both the chuck and collet to provide a low disconnection force for easy removal of the tubing. KQ2 fittings are available to order in multiples of 10.The current KQ2 series fitting has been discontinued. SMC has introduced an improved version of KQ2 series, and recommends that you utilize the new series for your product designs. <ul><li>Used to shut unused One-touch fittings </li><li>Lightweight </li><li>Variety of sizes to fit all KQ2 fittings </li></ul>

KQ2 one-touch, metric and inch size fittings are available in a wide variety of sizes, body styles and thread types. The specially designed packing provides positive sealing under pressure without the reduced flow common with compression fittings. The KQ2 release collar releases both the chuck and collet to provide a low disconnection force for easy removal of the tubing.? KQ2 fittings are available to order in multiples of 10.The current KQ2 series fitting has been discontinued. SMC has introduced an improved version of KQ2 series, and recommends that you utilize the new series for your product designs. To use the <a href="http://staging.smcetech.com/CC_host/pages/custom/templates/smc_v2/prodtree_branch_series_2.cfm?cc_nvl=%28%28CC,smc,CNN_US,NODE_87051))">new KQ2 series, click here.</a><ul><li>Accepts nylon and urethane tubes</li><li>Applicable for both vacuum and positive pressure applications</li><li>Release collar allows easy removal of tubing without damaging the tube</li><li>Maximum vacuum pressure of 1.0MPa</li></ul>

Lightweight, compact, and precision control make these speed controls the right choice for many heavy-duty applications. These speed controls are offered with in-line and elbow construction to give the widest choice to your unique application. Locking nuts are included as standard as well as simplified mounting. Thread sizes range from M3 to 2 and are available in both inch (NPT) and metric R/Rc(PT)<ul><li>Large flow in-line style</li><li>Body sizes: 1/2, 3/4, 1, 1-1/4, 1-1/2</li><li>Port sizes: 1/4, 3/8, 1/2, 3/4, 1, 1-1/4, 1-1/2, 2</li></ul>

Lightweight, compact, and precision control make these speed controls the right choice for many heavy-duty applications. These speed controls are offered with in-line and elbow construction to give the widest choice to your unique application. Locking nuts are included as standard as well as simplified mounting. Thread sizes range from M3 to 2 and are available in both inch (NPT) and metric R/Rc(PT)<ul><li>Metal elbow type tamper proof speed controller</li><li>Requirement of special tool for adjustments offers extra protection against inadvertent operation</li><li>On standard products, all brass parts are electroless nickel plated</li><li>Meter-in and meter-out types easily determined by the flow directionsymbol on the metal body</li><li>Threads with and without sealant areavailable as standard</li></ul>

Low disconnecting force helps prevent collet and chuck from biting into and damaging tubing. The body and threaded portion can tum independently of one another for use in confined spaces. For use with polyurethane, polyolefin, nylon, and PTFE tubing. Can be used for positive air pressure as well as vacuum for actuators, air preparation, and directional control valves. Male Elbow, 90 Deg, 1/4 in., TubexMale BSPT

MANFLD 10-STA *LQA

MANIFOLD, NVK 6-STA

Mechanically jointed rodless cylinder series MY3 provides high functionality with reduced height and length. The uniquely designed piston shape enables reduction of the height and length as well as practical arrangement of the common piping passages, cushion mechanism and positioning mechanism. This has achieved drastic miniaturization and weight reduction.<ul><li>Basic short type * and Basic standard type *</li><li>Applicable bore sizes: 16mm, 25mm, 40mm, and 63mm</li><li>Easy connection with external guide.</li><li>Vertical and lateral mouting is possible.</li><li>High functionality with reduced height and length compared to MY1 series</li></ul>

NEW SMC CRB1BW50-90D DOUBLE ACTING 90MM 50MM 1MPA PNEUMATIC CYLINDER B241266

NEW SMC NCMB075-0100S 1IN STROKE 3/4IN BORE 250PSI PNEUMATIC CYLINDER D364766

NEW SMC NVS4114-0009K 120V-AC SOLENOID VALVE D463960

NEW SMC NVZS2150-5FZ 24V-DC SOLENOID VALVE D357170

NEW SMC ZSE2-0X-55CN-D 12-24V-DC VACUUM SWITCH D506167

One-Touch mini fittings series KJ is available for use with SMC miniature valves and actuators, M3 and M5 ported. Their compact one-touch collet design allows easy disassembly with strong tube gripping. Electroless nickel plating is standard. KJ fittings are available to order in multiples of 10.The current KJ series fitting has been discontinued. SMC has introduced an improved version of KQ2 series, and recommends that you utilize the new series for your product designs. <ul><li>The KJ series has been discontinued, please see the New KQ2 series </li><li>Miniature, One-touch fitting </li><li>Inch threads </li><li>Tube OD: 1/8, 5/32, 1/4 </li><li>Maximum operating pressure: 1.0MPa </li><li>Material: nylon, soft nylon, polyurethane</li></ul>

PLUG CONNECTOR ASSY 12 (AC)

PN: E5032 Counter Pivot 32mm Bore

REGULATOR, ELECTRO-PNEU

REGULATOR, ELECTRO-PNEUMATIC

Series AF modular style air filter is a cost effective, clean looking solution to your filtration needs. Its' modular design allows connection with other SMC air preparation equipment. The series is available in six size options with a wide range of accessories.<ul><li>Modular air filter </li><li>Prevents contamination </li><li>Lighter weight than old style modular AF </li><li>Thickness reduction of resin case provides increased capacity (approx. 1.3 times more). </li><li>Improved water separation efficiency extends the service life of filter elements </li><li>Rc, NPT or G(PF) type threads </li></ul>

Series AFM Modular Style Mist Separator is a cost effective, clean looking solution to your filtration needs. The standard filtration is 0.3?m with a 95% particle size collection rate. The modular design allows connection with other SMC air preparation equipment. Use in combination with the AF series to meet your clean room filtration requirements. The AFM is available in 3 size options. <ul><li>Mist separator </li><li>Can be used in a more compact modular design </li><li>Bowl can be attached and detached with one hand </li><li>Turn proof structure at pressurized state for bowl removal </li><li>Standard drain cock for one-touch drain exhaust. </li><li>Cost effective and clean looking design. </li><li>Rc, G(PF) or NPT threads </li></ul>

Series AL modular style lubricator provides accurate lubrication of downstream equipment. The oil drop rate is adjustable depending on equipment requirements. The AL modular design allows connection with other SMC air preparation equipment. <ul><li>Adjustable oil drop rate</li><li>Bowl can be attached and detached with one hand</li><li>Optional drain cock for one touch drain exhaust</li><li>Provides accurate lubrication of downstream equipment</li></ul>

Series AMD can separate and remove aerosol state oil mist in compressed air and remove carbon or dust of more than 0.01um. It should be used as prefilter for compressed air in precision instruments or for clean room requirements.<ul><li>Micro mist separator</li><li>Prefilter of compressed air </li><li>Modular connection is possible </li><li>Port size: 1/8, 1/4, 3/8, 1/2, 3/4, 1, 1 1/2, 2 </li><li>Thread: Rc, G, NPT</li></ul>

Series ASV, speed exhaust controller provides an effective area that is two times larger than that of a speed controller. A silencer, one-touch fitting and flame resistant resin body is supplied as standard on the ASV. All brass parts are electroless nickel-plated.

Series CG1 precision air cylinder has 8 bore sizes and can meet any application need. The tube is impact extruded aluminum to produce an extraordinarily smooth finish, allow low break-away pressure and smooth stroke action. Eight mounting options are available. Auto switch capable. <ul><li>CG1, double acting, single rod cylinder with made-to-order options</li><li>Bores sizes *: 20, 25, 32, 40, 50 63 *</li><li>Most options are auto switch capable</li><li>Available strokes: 25mm to 1500mm depending on bore size</li><li>7 mounting options</li></ul>

Series CG1 precision air cylinder has 8 bore sizes and can meet any application need. The tube is impact extruded aluminum to produce an extraordinarily smooth finish, allow low break-away pressure and smooth stroke action. Eight mounting options are available. Auto switch capable. <ul><li>End lock cylinder, CBG1</li><li>Double acting, single rod</li><li>7 mounting styles available</li><li>Bore sizes *: 20, 25, 32, 40, 50, 63, 80 and 100</li><li>Rubber bumper or air cushion standard</li><li>Auto-switch capability</li></ul>

Series CJ2 miniature cylinders available in spring return, spring extend, or double acting offer stainless steel tubing and stainless steel rods. The series is available in bore sizes 6, 10, 16mm and stroke lengths from 1/2in. to 8in.. Mounting options include basic, foot, front flange, and double rear clevis. Series CJ2 is auto switch capable <ul><li>Standard double acting single rod</li><li>Bore sizes: 6, 10, 16 *</li><li>Strokes from 15mm through 200mm depending upon bore size</li><li>Mounts: basic, foot, front flange, double clevis</li><li>Variety of switches and a variety of lead wire lengths</li></ul>

Series CJ5-S is a stainless steel cylinder, designed for use in environments with water spray (such as food processing machines). A special scraper (standard) prevents water from entering the cylinder. Non-toxic additives allow confident use in equipment for food, beverage and medical products, etc. The CJ5-S series can be disassembled for replacement of seals. <ul><li>Stainless steel (SUS304) used for all exterior metal parts</li><li>Standard water resistant scraper prevents liquid leakage into the cylinder</li><li>2 types of sealing material - choices of NBR/FKM (nitrile rubber/fluoro rubber)</li><li>Uses grease for food processing machines - meets FDA standards</li><li>Water-resistant auto switch is available</li></ul>

Series CM2 stainless steel cylinders are compact, lightweight and offer high performance. Improved piston seal and rod seal greatly improve the units life. Rubber bumpers are standard. The CM2 series offers a variety of mounting options and is auto switch capable. <ul><li>Double acting single rod</li><li>Bore sizes: 20, 25, 32, and 40 *</li><li>Strokes from 25mm through 500mm</li><li>Mounts: basic, foot, front and rear flange, clevis, trunnion</li><li>With or without rod boot</li><li>Variety of switches and a variety of lead wire lengths</li></ul>

Series CRB2-Z, single or double vane, rotary actuator is availbable in 10, 15, 20, 30 and 40 bore.  The single vane style use specially designed seals and stoppers which enable this compact type actuator to rotate up to 270 degrees.  Double vane type is standardized for 90 and 100 degrees.<ul><li>Two shaft options available</li><li>Port locations modified</li><li>RoHS compliant</li><li>Mounting position of the auto switch can be set freely</li></ul>

Series KQG2 is a one-touch fitting made of all stainless steel SUS316, except seal parts. The series is suitable for use with steam and is grease-free. Applicable tubing includes FEP, PFA, nylon, soft nylon, polyurethane and polyolefin. The KQG2 series is available in both metric and inch sizes. The KQG2 is more compact and lightweight, and offers more configuration variations and tube sizes than the KQG series.<ul><li>Stainless steel 316 one-touch fittings, inch size</li><li>Seal parts: FKM </li><li>Can be used with steam </li><li>Grease-free </li><li>Applicable tubing material includes FEP, PFA, nylon, soft nylon, polyurethane, polyolefin</li></ul>

Series MXQR, reversible air slide table, uses a recirculating linear guide for high rigidity and high precision.  Ports on the MXQR can easily be reversed on site, with an allen wrench, to suit installation conditions.The MXQR is interchangeable with the MXQ air slide table, as the body and workpiece mounting dimensions are the same.  MXQR expands from MXQ s shock options to include a new shock for the 6mm bore, as well as RJ shocks for shorter cycle times and lower energy loads.<ul><li>Air slide table w/built-in guide rail</li><li>Bore size (mm): 6, 8, 12, 16, 20, 25</li><li>Reversible Type</li><li>Adjuster options: rubber stopper, shock absorber, metal stopper</li><li>Auto switch capable</li></ul>

Series NCA1 medium duty tie rod cylinders are NFPA interchangeable, have a crimped piston rod assembly, are pre-lubricated and available in 11 mounting styles. Bore sizes range from 1.5 to 4 inches. The NCA1 expanded line of medium duty cylinders offer bore sizes ranging from 5 to 8 inches, and come standard with adjustable air cushion.<ul><li>5in. bore medium duty air cylinder</li><li>11 NFPA mounting options</li><li>Standard with adjustable air cushion</li><li>Auto switch capable</li></ul>

Series NCM stainless steel cylinder offers space savings, high performance, and interchangeability with other stainless steel cylinders. A wear ring extends the seal life and a bronze rod bushing is standard on all bore sizes. The NCM is available in 4 mounting styles * as well as double rod and spring return or spring extend models. The NCM is auto-switch capable without any change in cylinder dimension. Bore sizes range from 7/16in. to 2in. and standard strokes from 1/2in. to 12in.. <ul><li>Direct mount, double acting, single rod air cylinder</li><li>Stainless steel body</li><li>Bore sizes: 3/4in., 1 1/16in., 1 1/2in.</li><li>Auto switch capable</li></ul>

Series NCM stainless steel cylinder offers space savings, high performance, and interchangeability with other stainless steel cylinders. A wear ring extends the seal life and a bronze rod bushing is standard on all bore sizes. The NCM is available in 4 mounting styles * as well as double rod and spring return or spring extend models. The NCM is auto-switch capable without any change in cylinder dimension. Bore sizes range from 7/16in. to 2in. and standard strokes from 1/2in. to 12in.. <ul><li>Double acting single rod </li><li>Bore sizes *: 7/16, 9/16, 3/4, 7/8, 1 1/16,1 1/4, 1 1/2, 2 </li><li>Mounts: nose, rear, end, rod, block </li><li>Variety of switches and lead wire lengths</li><li>Optional Rod Boot </li></ul>

Series S070 is a super compact direct acting 2/3 port solenoid valve that meets the miniaturization needs of analyzers, medical equipment and semiconductor manufacturing equipment. S070 is extremely lightweight (5g for valve single unit type) and operation noise is 38dB(A) or less. It is easy to increase or decrease the number of stations (stacking base). Valve width is 7mm. <ul><li>3 port solenoid valve, direct operated</li><li>Valve width: 7mm</li><li>Weight: 5g (single unit valve)</li><li>Operation noise: 38dB(A) or less</li><li>Power consumption: 0.35W (std), 0.1W (w/power saving circuit)</li></ul>