Brand: SMC Products (Page 3)

Series SY offers major advances in valve performance for cost-effective solutions to your requirements. The series offers high flow with low power consumption in a compact design. The SY is available in body ported or base mounted styles and can be used individually or manifold mounted.<ul><li>Fluid: air </li><li>Operating pressure range: (internal pilot) 0.1 - 0.7MPa (external pilot) -100kPa to 0.7MPa (external pilot, pilot pressure range) 0.25 - 0.7MPa </li><li>Effective area mm 2 (Cv): body ported 10.6 (0.59); base mounted 12.6 (0.7) </li><li>Coil rated voltage: 3, 5, 6, 12, 24VDC; 100, 110, 200, 220VAC </li><li>Response time (0.5MPa) w/o indicator light andamp; surge voltage suppressor: 32ms or less </li><li>Ambient andamp; fluid temperature: 50C </li></ul>

Series TU tubing represents a new high quality standard in metric size polyurethane tubing. Series TUH, hard polyurethane tubing, is available in a standard or high pressure type and TUS is a soft polyurethane tubing. <ul><li>Available in 8 standard colors</li><li>Available in 2 roll sizes</li><li>Maximum operating pressure 0.8MPa at 20?C</li></ul>

Series VFR consists of 5 port pilot solenoid valves with rubber seals and base mounted type manifolds, available in plug-in and non plug-in styles. Port sizes range from 1/8 to 1/2 with Rc(PT), NPTF and G(PF) thread types available. Various options also available. <ul><li>NVFR2000 series manifold, North American</li><li>Plug-in and non plug-in styles</li><li>Wiring types (non plug-in): grommet, grommet terminal, Conduit terminal, DIN connector, L plug connector M plug connector</li><li>Wiring types (plug-in): terminal block, multi-connector, D-sub connector</li><li>Maximum stations: 17 (depending on style)</li></ul>

Series VH rotary hand valves compact design and variety of flow rates make it ideal for a wide range of applications requiring manual directional control. The slide ring design makes the VH valve easy to operate while offering a high tolerance to contamination with its "self-cleaning, wiping action".

Series VQZ base mount solenoid valves combine convenience with durability and performance in a more traditional mounting style. Series VQZ Body Ported Solenoid Valves combine flexibility with high performance and long life in an inline body style. <ul><li>Bar stock type valve manifold for VQZ200/300 series valves</li><li>Optional DIN rail mount</li><li>Side porting</li><li>Maximum 20 stations available as standard</li><li>12 port sizes available</li></ul>

Series VQZ base mount solenoid valves combine convenience with durability and performance in a more traditional mounting style. Series VQZ Body Ported Solenoid Valves combine flexibility with high performance and long life in an inline body style. <ul><li>Base mounted connector type plug lead manifold for VQZ**5* valve</li><li>Optional DIN rail mounting for ease of installation</li><li>Both 3 and 5 port valves can be mounted on the same manifold</li><li>Maximum 20 stations available as standard</li><li>16 port sizes available</li></ul>

Series VQZ base mount solenoid valves combine convenience with durability and performance in a more traditional mounting style. Series VQZ Body Ported Solenoid Valves combine flexibility with high performance and long life in an inline body style. <ul><li>Fluid: air, inert gas</li><li>Operating pressure range: 0.1 - 0.7MPa</li><li>Effective area mm 2 (Cv): metal seal 2.0 (0.11) - 12.6 (0.7); rubber seal 3.1 (0.17) - 16.2 (0.9)</li><li>Coil rated voltage: 12, 24VDC; 100, 110, 200, 220VAC</li><li>Response time (ms) standard 1W, high pressure 1.5W: metal seal 25 or less; rubber seal 30 or less</li><li>Ambient and fluid temperature: -10 to 50 C</li></ul>

Series VQZ base mount solenoid valves combine convenience with durability and performance in a more traditional mounting style. Series VQZ Body Ported Solenoid Valves combine flexibility with high performance and long life in an inline body style. <ul><li>Manifold base for VQZ200/300 body ported valves</li><li>Top mounted piping</li><li>Maximum 20 stations available as standard</li><li>1/8 PT or NPT(VQZ200); 1/4 PT or NPT(VQZ300) P and R ports</li><li>Optional DIN rail mount</li></ul>

Series VQZ base mount solenoid valves combine convenience with durability and performance in a more traditional mounting style. Series VQZ Body Ported Solenoid Valves combine flexibility with high performance and long life in an inline body style. <ul><li>Stacking type connector kit manifold for VQZ**2* valve</li><li>DIN rail mounting for ease of installation</li><li>Valves seperate from manifold for ease of maintenance</li><li>Maximum 20 stations available as standard</li></ul>

Series VX21/22/23, is a direct operated 2 port solenoid valve for air, gas, vacuum, water, steam and oil. Proper selection of body and sealing materials permits application of a wide variety of fluids. Application can be matched by simply choosing body materials (brass, stainless steel), seal materials (NBR, EPR, FPM, PTFE) and the solenoid coil (class B, class H). <ul><li>IP65 enclosure </li><li>Conforms to UL94V-0 flame resistance </li><li>Special construction improves service life when compared with current shading coil </li><li>Power consumption: size 1 - 4.5w; size 2 - 7w; size 3 - 10.5w </li><li>Body material: aluminum, resin</li></ul>

Series VX21/22/23, is a direct operated 2 port solenoid valve for air, gas, vacuum, water, steam and oil. Proper selection of body and sealing materials permits application of a wide variety of fluids. Application can be matched by simply choosing body materials (brass, stainless steel), seal materials (NBR, EPR, FPM, PTFE) and the solenoid coil (class B, class H). <ul><li>IP65 enclosure</li><li>Conforms to UL94V-0 flame resistance</li><li>Special construction improves service life when compared with current shading coil</li><li>Power consumption: size 1 - 4.5w; size 2 - 7w; size 3 - 10.5w</li><li>Body material: C37 (brass), stainless steel </li></ul>

SMC Corporation manufactures actuators, valves, airline equipment, connector fittings, electrical products, vacuum products, dryers, temperature control chillers, and accessories. SMC Corporation of America is headquartered in Noblesville, IN, and meets International Organization for Standardization (ISO) 9000:2000 standards.</div>

SMC Corporation manufactures actuators, valves, airline equipment, connector fittings, electrical products, vacuum products, dryers, temperature control chillers, and accessories. SMC Corporation of America is headquartered in Noblesville, IN, and meets International Organization for Standardization (ISO) standard 9001:2008.</div>

SMC Corporation manufactures actuators, valves, airline equipment, connector fittings, electrical products, vacuum products, dryers, temperature control chillers, and accessories. SMC Corporation of America is headquartered in Noblesville, IN, and meets International Organization for Standardization (ISO) standard 9001:2008.<h5>What?s in the Box?</h5><ul><li>SMC KQ2S adapter</li><li>Gasket</li></ul></div>

SMC Corporation manufactures actuators, valves, airline equipment, connector fittings, electrical products, vacuum products, dryers, temperature control chillers, and accessories. SMC Corporation of America is headquartered in Noblesville, IN, and meets International Organization for Standardization (ISO) standards 9000:2000 and 9001:2008.</div>

Smc Evs1-01-Fg-S-3Zm0,Valve,Sgl Solenoid,24Vdc,26Mm

SMC has improved product performance and reliability with the redesigned SY series valve. The SY3000 and SY5000 have the same valve width as their predecessors, but the flow has been increased by up to 80%, allowing the valve size to be reduced. A built-in strainer in the pilot valve prevents trouble caused by foreign matter. By using H-NBR seal material for the main valve and seals, Ozone resistance has been improved. Side, top and bottom port/pipe directions are available to allow flexible installation. The SY is available in body ported or base mounted styles, and can be used individually or manifold mounted.

SMC has redesigned the CQ2 compact cylinder with a new body, making it possible to mount auto switches on any of the 4 surfaces, depending on the installation conditions. Auto switch mounting grooves have replaced the CQ2s mounting rails, preventing projection of auto switches and improving ease and safety of work.<ul><li>Double acting, single rod, compact cylinder</li><li>Bore sizes *: 12, 16, 20, 25, 32, 40, 50, 63, 80, 100</li><li>Standard stroke range *: 5 to 100</li><li>Port threads: M *; Rc, NPT or G *</li><li>Auto switch capable</li></ul>

SMC has redesigned the CQ2 compact cylinder with a new body, making it possible to mount auto switches on any of the 4 surfaces, depending on the installation conditions. Auto switch mounting grooves have replaced the CQ2s mounting rails, preventing projection of auto switches and improving ease and safety of work.<ul><li>Double acting, single rod, non-rotating compact cylinder </li><li>Bore sizes *: 12, 16, 20, 25, 32, 40, 50, 63</li><li>Standard stroke range *: 5 to 100</li> <li>Port threads: M *; Rc, NPT or G * </li><li>Auto switch capable</li></ul>

SMC has redesigned the CQ2 compact cylinder with a new body, making it possible to mount auto switches on any of the 4 surfaces, depending on the installation conditions. Auto switch mounting grooves have replaced the CQ2s mounting rails, preventing projection of auto switches and improvingease and safety of work.<ul><li>Double acting, single rod, compact cylinder</li><li>Bore sizes *: 12, 16, 20, 25, 32, 40, 50, 63, 80, 100</li><li>Standard stroke range *: 5 to 100</li><li>Port threads: M *; Rc, NPT or G *</li><li>Auto switch capable</li></ul>

SMC has redesigned the CQ2 compact cylinder with a new body, making it possible to mount auto switches on any of the 4 surfaces, depending on the installation conditions. Auto switch mounting grooves have replaced the CQ2s mounting rails, preventing projection of auto switches and improvingease and safety of work.<ul><li>Double acting,double rod, compact cylinder</li> <li>Bore sizes *: 12, 16, 20, 25, 32, 40, 50, 63, 80, 100 </li><li>Standard stroke range *: 5 to 100 </li><li>Port threads: M *; Rc, NPT or G * </li><li>Auto switch capable</li></ul>

SMC high purity HYPER FITTING series LQ* responds to the latest demands in process control. From parts cleaning to assembly and packaging, all processes are controlled for cleanliness, and the use of new PFA virtually eliminates particle generation and TOC (total organic carbon) allowing confident use for the most demanding applications. If chemistries or flow requirements are changed during process, our face seal design allows for quick change of tubing, and/or tube diameters, using the same fitting body. <ul><li>High purity fluororesin fitting </li><li>Space saving & tube connector type</li><li>Maximum operating pressure: 0.7MPa </li><li>Fluid temperature: 0 to 150?C </li><li>Variety of size combinations available</li></ul>

Smc Kq2t07-00 - Pack Of 8 -Pneumatic Tee Fitting One-Touch Fitting 1/4"Alt Id: 70070430

SMC MES810U-10T-1W, MANIFOLD ENDPLATE KIT(VV83*)

SMC MXS12-100A 100MM 12MM 0.15-0.7MPA DOUBLE ACTING PNEUMATIC CYLINDER D506060

SMC offers a variety of auto switches for actuators and air grippers. Solid state switch is in with 2-color indication, which allows the optimum operating position to be determined by the color of the light. Solid state switche are also available in 2-color indication with diagnostic output, water resistant 2-color indication, built-in OFF-delay timer (200 ms), magnetic field resistant, heat resistant and wide range detection configurations. 5m lead wire lengths are available.

SMC offers a variety of pressure gauges including general purpose, oil-free/external parts copper-free with limit indicator, clean series and a pressure gauge with a pressure switch.  Pressure ranges vary from 0 to 1.5MPa, depending on the selected gauge.  Panel mounting is possible.<ul><li>General purpose gauge w/limit indicator </li><li>Back or vertical side thread </li><li>Indication precision: ?3% F.S. (full span)</li></ul>

SMC s MK-Z has an allowable moment of inertia 3 times higher than the conventional MK and MK2 styles. The overall length is the same as the conventional styles, and mounting dimensions are interchangeable with the MK series. Auto switches can be mounted on any of the 4 surfaces with no projection of the switch.<ul><li>Rotary clamp cylinder w/auto switch mounting grooves</li><li>Bore sizes (mm): 12, 16, 20, 25, 32, 40, 50, 63</li><li>Standard stroke (mm): 10, 20, 30, 50 (depending on bore size)</li><li>Clockwise or counterclockwise rotary direction</li><li>Auto switch capable</li></ul>

SMC s series CA2-Z air cylinder is 15% lighter than the existing CA2 cylinder.  Fine adjustment is now possible due to the increase in the air cushion adjustment range.  The CA2-Z can now be ordered with rod end or pivot brackets, and mounting dimensions are the same as the existing CA2.  A variety of auto switches are available for mounting, including compact switches and magnetic field resistant switches.  The CA2-Z is available in 40, 50, 63, 80 and 100 bores sizes, and is RoHS compliant.<ul><li>Double acting single rod </li><li>Bore sizes: 40, 50, 63, 80, 100mm</li><li>Options include pivot bracket and/or knuckle joints</li><li>Auto switch capable </li></ul>

SMC s VQ7-6/7-8 series valve conforms to ISO standard 5591/I.  A choice of metal or rubber seal increases compatibility with various operating and environmental conditions.  Manifolds are available with a wide range of interface options to meet a variety of application requirements.  The VQ7-6/7-8 has a smaller, space-saving profile and is lighter in weight than the VS7/VP7 series. <ul><li>Size 2, ISO standard solenoid valve</li><li>Fluid: air/inert gas</li><li>Operating pressure: 0.15 to 1.0MPa</li><li>Enclosure: IP65 (dusttight, splah proof)</li></ul>

SMC VQ31M1-5GZ-C10 Solenoid valve

Smc Vv5qc41-04C16,4 Port Manifold4. Stainless Quick Fittingsattached Part.Smc Ex250-Sdn1-X122

SMC's CG5-S series is a stainless steel cylinder, perfect for use in wash down applications such as food processing machinery requiring intense cleaning.  The use of non-toxic additives allows confident use in equipment for foods, beverages and medical products, etc.  The CG5-S can be disassembled, allowing replacement of seals, which promotes an extended service life.  SMC provides plugs for unused mounting threads to prevent residue build-up in the threads.  The use of stainless steel (SUS304) on external metal parts provides improved corrosion resistance in environments with exposure to water. <ul><li>CG5 mounting brackets </li><li>Type: flange, foot, trunnion bracket </li><li>Applicable to all bore sizes</li></ul>

SMCs horizontal type LEHF, 2-finger electric grippers are structured to maintain workpiece gripping force in the event of an emergency stop or restart. An encoder makes it possible to confirm positioning and to output length measurements. The LEHF series is available in standard or long stroke models.<ul><li>2-finger type</li><li>Body size: 10, 20, 32, 40</li><li>Manual override adjustment screw on both sides *</li><li>Optional controller</li></ul>

SMCs new AF modular style air filter combines the element and bowl in one piece, making element replacement easy.  There is a maximum 46% reduction in size, reducing required maintenance space.  The AF bowl (size 30 and 40) is covered with a transparent bowl guard, allowing 360 monitoring.  The modular design of the AF allows connection with other SMC air preparation equipment. The series is available in body size 20, 30 and 40.

SMCs VQ7-6/7-8 series valve conforms to ISO standard 5591/I.  A choice of metal or rubber seal increases compatibility with various operating and environmental conditions.  Manifolds are available with a wide range of interface options to meet a variety of application requirements.  The VQ7-6/7-8 has a smaller, space-saving profile and is lighter in weight than the VS7/VP7 series. <ul><li>Manifold block ISO size 1</li><li>Applicable solenoid valve:  VQ7-6</li><li>Number of stations: 1-10</li><li>Wide range of interface options</li></ul>

Speed Control Valve Valve Style Elbow Valve Port Size 1/2 In. Valve Tube Size 1/2 In. Valve Body Size 1/2 In. Valve Flow Out Body Material - Valves Stainless Steel Connection BSPT x Tube Adjustment Screw Pressure Range 14.5 to 145 psi Temp Range 23 Degrees to 140 Degrees F Standards - Air Cylinder Speed Control

Technical Specification Item Solenoid Air Control Valve Valve Ways and Positions 5-Way/2-Position Voltage 110VAC Center Position Open Valve Actuator / Return Solenoid / Spring Max. CFM - Valves 17.3 Operational Pressure Range 15 to 135 psi Normally Open / Normally Closed Normally Open/Normally Closed Body Style Base Mounted Pilot Pressure 15 Coefficient of Volume 0.62 Electrical Connections Lead Wire Shifting Technology Solenoid/Spring Power Consumption 3.4VA Ambient Temp. Range 14 Degrees to 122 Degrees F Override Non-Locking Push Overall Height 2-5/8 Overall Length 5-29/32 Overall Width 1-11/16 Pneumatic Valves Product Group Solenoid Air Control Valve This listing is for each.

The AMG series water separator is installed on the air pressure line to remove water drops from compressed air. It is available in 7 sizes with a variety of optional combinations to meet your application requirements. <ul><li>Water Separator w/possible modular connection</li><li>Water removal rate:  99% </li><li>Max operating pressure: 1.0MPa </li><li>Options: Fluororubber material, medium air pressure, drain guide, IN-OUT reversal direction, degreasing wash, white vaseline</li></ul>

The C76 series air cylinders offer a simple, space saving design with high dimensional accuracy, making these cylinders very easy to use. Large spanner flats on the rod and head covers greatly simplify their installation and positioning. Low friction and the standard elastomer cushion rings allow piston speeds up to 1500mm/sec. Greater side loads are allowed due to the close tolerance of the piston rod in the front-end bush.<ul><li>Standard, double acting, single rod</li><li>Bore sizes (mm): 32, 40</li><li>Max. operating pressure: 1.0MPa</li><li>Rubber cushion or air cushion</li><li>Rod boots available</li></ul>

The C85 series conforms to ISO 6432 and CETOP RP52P. The C85 is available in bore sizes 8mm through 25mm with standard strokes ranging from 10mm through 300mm. A unique rod packing design prevents entry of dust and the effectiveness of the seal is such that the C85 is suitable for use in extremely dusty environments. With abrasion resistant packings and replaceable nose seals, the C85 offers exceptional service life.<ul><li>Double acting, single rod, crimped cylinder</li><li>Conforms to ISO 6432 and CETOP RP52P</li><li>Bore sizes *: 8, 10, 12, 16, 20, 25</li><li>Standard strokes up to 300mm</li><li>Auto switch capable</li></ul>

The C85 series conforms to ISO 6432 and CETOP RP52P. The C85 is available in bore sizes 8mm through 25mm with standard strokes ranging from 10mm through 300mm. A unique rod packing design prevents entry of dust and the effectiveness of the seal is such that the C85 is suitable for use in extremely dusty environments. With abrasion resistant packings and replaceable nose seals, the C85 offers exceptional service life.<ul><li>Single acting, single rod, spring return/spring extend</li><li>Conforms to ISO standard 6432</li><li>Bore sizes *: 8, 10, 12, 16, 20, 25</li><li>Standard strokes up to 150mm</li><li>Auto switch capable</li></ul>

The C95 is ISO, VDMA24562 interchangeable, and utilizes a tie rod construction. In addition to standard cushions and wear band, the C95 utilizes a "floating" cushion seal design that greatly improves operation. SMC s exclusive "figure 8" seal insures long cycle life. <ul><li>Conforms to ISO 6431, CETOP RP43P, VDMA 24562</li><li>Large bore size (160~250mm)</li><li>Standard strokes up to 2400mm (depending on bore size)</li><li>Stainless steel rod</li><li>Auto switch capable</li></ul>

The CK1 series is a clamp cylinder available in two styles of clevis widths *. It is a non-lube, compact, lightweight cylinder with a built-in speed controller. Gaiters are unnecessary because a heavy-duty coil scraper is provided as a countermeasure against spatters. The CK1 is available in 3 bore sizes with stroke lengths up to 150mm. Options include rod attachments and auto-switch capabilities.<ul><li>Two styles of clevis widths *</li><li>Built-in speed controller</li><li>Heavy duty coil scraper</li><li>Strong magnetic type</li><li>Compact and lightweight</li></ul>

The CQS compact cylinder is available for those small bore cylinder applications where saving space is a concern. The CQS offers standard long strokes * in four bore sizes from 12 to 25mm. Long stroke versions incorporate a wear band and thicker piston to handle the increased bearing needs of the longer strokes. Both switch capable and non-switch capable body styles are the same, and switches can be mounted on three * and four * sides. An increased side load version * is available for more demanding applications. <ul><li>Anti-laterial load</li><li>Bore sizes: 12, 16, 20, 25 *</li><li>Strokes: 5mm through 50mm depending upon bore size</li><li>Mounts: through hole, both ends tapped, foot, front or rear flanges, double clevis</li><li>Variety of switches and a variety of lead wire lengths</li></ul>

The CRA1 rack andamp; pinion rotary actuator offers very high torque-to-size and accurate positioning. Bore sizes are 30, 50, 63, 80 and 100mm. Units may be ordered auto-switch capable and with cushions. Dimensions range from 3" X 4" X 2" to a maximum of 8" X 9.65" X 4.41". Single shaft end or double shaft end models are available.<ul><li>Standard type rotary actuator</li><li>3 mounting types available</li><li>Single or double rod end available</li><li>Bores sizes: 50mm ~ 100mm</li><li>Auto switch capable</li></ul>

The CRQ2 series is a compact rotary, rack and pinion style actuator. Single and double shaft types are available in all sizes (10~40mm).  The CRQ2 uses internal cushioning and the body can be used as a flange. The use of a double piston eliminates backlash. CRQ2X low speed rotary actuator is also available.  Auto switches are available.  <ul><li>Low-speed rotary actuator</li><li>Rotation time adjustment range: 1 to 5 (s/90)</li><li>Dimensions compatible with the CRQ2 series</li><li>Smooth motion without stick-slip phenomenon</li></ul>

The LEF series slider type electric actuator features a low profile height of 46mm *. The actuators main body can be mounted without removing any exterior components, such as the cover, making installation easy. The standard equipped seal band covers the guide, ball screw and belt, preventing grease and external foreign matter from splashing and entering the LEF. There are 2 types of drivers available, ball screw or timing belt. Available motors include servo motor ball screw drive or step motor belt drive. When the LEF is ordered with the controller, initial data of the actuator is preset in the controller allowing start-up in a short time with the in.easy modein..<ul><li>Body size: 16, 25, 32, 40</li><li>Ball screw drive </li><li>Applicable stroke range: 100, 200, 300, 400, 500, 600, 700, 800, 900, 1000</li><li>2 types of motors: servo motor ball screw drive or step motor belt drive </li><li>Controller mounting: screw or DIN rail type</li></ul>

The LES series electric slide table actuator uses a compactly-integrated, recirculating linear guide for high rigidity and high precision. When the LES is ordered with the controller, initial data of the actuator is preset in the controller allowing start-up in a short time with the in.easy modein.. Two types of built-in motors * are available. The series can be top or bottom mounted. In addition, the LES series is available in an optional symmetric style *.<ul><li>In-line motor type </li><li>Reduced cycle time - 5,000 mm/s? max. acceleration, 400 mm/s max. speed </li><li>Positioning repeatability: within ?0.05 mm </li><li>Maximum pushing force: 180 N</li><li>Dedicated controller with basic operation setting can be preinstalled</li></ul>

The LES series electric slide table actuator uses a compactly-integrated, recirculating linear guide for high rigidity and high precision. When the LES is ordered with the controller, initial data of the actuator is preset in the controller allowing start-up in a short time with the in.easy modein.. Two types of built-in motors * are available. The series can be top or bottom mounted. In addition, the LES series is available in an optional symmetric style *.<ul><li>Reduced tact time - 5,000 mm/s? max. acceleration, 400 mm/s max. speed </li><li>Positioning repeatability: within ?0.05 mm </li><li>Positioning pattern outputs: 64 points </li><li>Compact and space saving </li><li>Applicable strokes: 50, 75, 100, 150</li></ul>

The MB series medium duty tie rod cylinder offers an improved design that enhances cylinder operation and ease of use. The standard air cushion utilizes a floating cushion seal to eliminate piston rod bouncing. The cushion volume has been elevated permitting about 30% more allowable kinetic energy absorption. The port and captive cushion adjustment valve are located on the same side of cap for heightened access. The MB series is available with many standard options, which include stroke adjustment, tandem, high/low temperature seals, heavy rod scraper, non-rotating rod, double rod and many more.<ul><li>End lock type air cylinder</li><li>6 bore sizes available: 32mm ~ 100mm</li><li>7 mounting styles available</li><li>Double acting , single rod</li><li>Auto switch capable</li></ul>

The MB series medium duty tie rod cylinder offers an improved design that enhances cylinder operation and ease of use. The standard air cushion utilizes a floating cushion seal to eliminate piston rod bouncing. The cushion volume has been elevated permitting about 30% more allowable kinetic energy absorption. The port and captive cushion adjustment valve are located on the same side of cap for heightened access. The MB series is available with many standard options, which include stroke adjustment, tandem, high/low temperature seals, heavy rod scraper, non-rotating rod, double rod and many more.<ul><li>Standard: double acting single rod </li><li>Bore sizes: 32, 40, 50, 63, 80, 100, 125 * </li><li>Strokes from 25mm through 1500mm depending upon bore size </li><li>Mounts: basic, foot, front and rear flange, single or double clevis, and center trunnion </li><li>With or without rod boot </li><li>Variety of switches and a variety of lead wire lengths </li></ul>

The MGC guide cylinder is ideal for material handling applications involving stopping, lifting, and pushing. It combines the functions of a conventional linear cylinder, and a non-rotation device. Features include standard air cushions, grease nipple, and switch capability. Other features include, slide or ball bushing bearings, compact design, adjustable air cushion, and lightweight guided actuator.<ul><li>Ball bushing bearings</li><li>Bore sizes from 20mm to 50mm</li><li>Long strokes available</li><li>Lightweight</li><li>Air cushion standard</li></ul>

The MGP is designed for high side load applications found in material handling, lifting and stopping. The cylinder utilizes an ultra-compact design by incorporating the cylinder body as part of the guide body. As the stroke length increases, so does the bearing length, thus enhancing the cylinders load bearing capacity. Conventional designed guided cylinders have a set bearing length resulting in dramatic decreases in side load capacity as stroke lengths increase. The MGP is the latest generation of guided cylinders and offers higher load capability, longer strokes, 2 port locations, switch mounting grooves on two sides, and a more versatile T-slot mounting than the MGQ series. Order made options for this series include adjustable air cushions, heavy duty guide rods, copper free, high temperature, and low speed.<ul><li>Compact guide cylinder with air cushion </li><li>Bore size: 12, 16, 20, 25, 32, 40, 50, 63, 80, 100 * </li><li>Strokes: 10mm through 400mm, depending upon bore size </li><li>Variety of switches with a variety of wire lead lengths </li></ul>

The MGP is designed for high side load applications found in material handling, lifting and stopping. The cylinder utilizes an ultra-compact design by incorporating the cylinder body as part of the guide body. As the stroke length increases, so does the bearing length, thus enhancing the cylinders load bearing capacity. Conventional designed guided cylinders have a set bearing length resulting in dramatic decreases in side load capacity as stroke lengths increase. The MGP is the latest generation of guided cylinders and offers higher load capability, longer strokes, 2 port locations, switch mounting grooves on two sides, and a more versatile T-slot mounting than the MGQ series. Order made options for this series include adjustable air cushions, heavy duty guide rods, copper free, high temperature, and low speed.<ul><li>Compact guide cylinder with ball bearing bushing </li><li>Bore size: 12, 16, 20, 25, 32, 40, 50, 63, 80, 100 * </li><li>Strokes: 10mm through 400mm, depending upon bore size </li><li>Variety of switches with a variety of wire lead lengths </li></ul>