GUHRING INC. Products

All products from this brand (4297 total)

18mm HSS GT100 Parabolic Flute Bushing Length Drill, Morse Taper #2 Shank, 130? Point, Steam Oxide Finish, 165mm LOC 165mm LOC,263mm OAL,MT2 Shank Series No. 551, Order Code 18.000, Guhring Part #9005510180000

18mm I.D. HSK-100A GUHRING Hydraulic Chuck w/Coolant & Increased Clamping Force, 200mm Gage Length HSK-A to ISO 12164-1 / DIN 69893-1 | balanced to G2.5 / 25,000 RPM | tremendous clamping force | maximum concentricity deviation 3 um | extra long gage lengths 150mm & 160mm maximum concentricity deviation 5 ?m and 200mm gage length maximum concentricity deviation 7 ?m | axial length adjustment | for tool shank tolerance h6 | includes adjustment screw, Series no. 4900 | includes hexagon chuck key, Series no. 4912 | order coolant supply set, Series No. 4949 separately. The use of reduction sleeves greatly improves the usefulness of a hydraulic chuck. Clamp directly on the cutting tool shank or use a reduction sleeve to hold a different diameter tool shank and increase transferable torque by approximately 25%. The reduction sleeve outside diameter must match your hydraulic chuck's nominal inside diameter. Reduction sleeves are available in 6 different O.D.s; 1/2\

18mm I.D. HSK-50A GUHRING Weldon Side Lock Holder, Coolant Through, 80mm Gage Length HSK-A to ISO 12164-1 / DIN 69893-1 | Balanced to G6.3 / 15,000 RPM | Dimensions to DIN 69882-4 | With Bore to DIN 1835-2 Form B \

18mm I.D. HSK-50E GUHRING Shrink Fit Holder With Conventional or MQL Coolant, 95mm Gage Length HSK-E to ISO 12164-1 / DIN 69893-5 With Access Hole | Balanced to G2.5 / 25,000 RPM | For Tool Shank Tolerance h6 | Includes Setting Screw, Series No. 4977 or 4904 | For Conventional Cooling Order Coolant Supply Set, Series 4949 Separately | Suitable For Tools With Internal Coolant. A gripping principle: When shrink fitting tools into shrink fit chucks, the decisive factors for ensuring the safe clamping of the tool in the tool holder are solely the heating and cooling of the tool holder. The heating process expands the shrink fit chuck enabling a tool to be inserted or withdrawn respectively. During the cooling process it contracts again and clamps the inserted tool with maximum clamping force. Series No. 4737, Order Code 018.0500. Made in Germany, Guhring Part #9047370180500

18mm I.D. HSK-63A GUHRING Hydraulic Chuck w/Coolant & Increased Clamping Force, 90mm Gage Length HSK-A to ISO 12164-1 / DIN 69893-1 | balanced to G2.5 / 25,000 RPM | tremendous clamping force | maximum concentricity deviation 3 um | extra long gage lengths 150mm & 160mm maximum concentricity deviation 5 ?m and 200mm gage length maximum concentricity deviation 7 ?m | axial length adjustment | for tool shank tolerance h6 | includes adjustment screw, Series no. 4900 | includes hexagon chuck key, Series no. 4912 | order coolant supply set, Series No. 4949 separately. The use of reduction sleeves greatly improves the usefulness of a hydraulic chuck. Clamp directly on the cutting tool shank or use a reduction sleeve to hold a different diameter tool shank and increase transferable torque by approximately 25%. The reduction sleeve outside diameter must match your hydraulic chuck's nominal inside diameter. Reduction sleeves are available in 6 different O.D.s; 1/2\

18mm I.D. HSK-63A GUHRING Shrink Fit Holder With Conventional or MQL Coolant, 95mm Gage Length HSK-A to ISO12164-1 / DIN 69893-1 | Balanced to G2.5 / 25,000 RPM | Includes 4 or 6 M6 Balancing Screws | For Tool Shank Tolerance h6 | to DIN 69882-8 | Includes Setting Screw, Series No. 4977 or 4904 | For Conventional Cooling Order Coolant Supply Set, Series 4949 Separately | Suitable For Tools With Internal Coolant. A gripping principle: When shrink fitting tools into shrink fit chucks, the decisive factors for ensuring the safe clamping of the tool in the tool holder are solely the heating and cooling of the tool holder. The heating process expands the shrink fit chuck enabling a tool to be inserted or withdrawn respectively. During the cooling process it contracts again and clamps the inserted tool with maximum clamping force. Series No. 4736, Order Code 018.0630. Made in Germany, Guhring Part #9047360180630

18mm I.D. HSK-63A GUHRING Whistle Notch Side Lock Holder, Coolant Through, 100mm Gage Length HSK-A to ISO 12164-1 / DIN 69893-1 | Balanced to G6.3 / 15,000 RPM | For Tool Shank to Tolerance h6 | Dimensions to DIN 69882-5 | From Bore Diameter 25mm With Two Clamping Screws | Includes Clamping Screw, Series No. 4903 and Adjustment Screw. Series No. 4334, Order Code 018.0630. Made in Germany, Guhring Part #9043340180630

18mm I.D. HSK-63A GuhrOJet Peripheral Coolant-Fed Shrink Fit Holder, 95mm Gage Length HSK-A to ISO 12164-1 / DIN 69893-1 | Balanced to G2.5 / 25,000 RPM | For Tool Shank Tolerance h6 | to DIN 69882-8 | Includes 4 or 6 M6 Balancing Screws | Optimized For Cutting Tools Without Internal Coolant Ducts | With Coolant Ducts in the Bore For Directing Peripheral Coolant Directly to the Cutting Tool, Improving The Machining Process And Extending Tool Life | Includes Setting Screw, Series No. 4977 With Axial Force Dampening For Perfect Runout Accuracy. A gripping principle: When shrink fitting tools into shrink fit chucks, the decisive factors for ensuring the safe clamping of the tool in the tool holder are solely the heating and cooling of the tool holder. The heating process expands the shrink fit chuck enabling a tool to be inserted or withdrawn respectively. During the cooling process it contracts again and clamps the inserted tool with maximum clamping force. Series No. 4755, Order Code 018.0630. Made in Germany, Guhring Part #9047550180630

18mm I.D. HSK-63C GUHRING Hydraulic Chuck w/Coolant & Radial Accessed Length Adjustment, 80mm Gage Length HSK-C to ISO 12164-1/DIN 69893-1 | balanced to G2.5 / 25,000 RPM | tremendous clamping force | maximum concentricity deviation 3 um | robust, radial operated length adjustment | 10mm length adjustability | for tool shank tolerance h6 | includes hex wrench for radial length setting | includes hexagon chuck key, Series no. 4912 | order coolant supply set 4949 separately. The use of reduction sleeves greatly improves the usefulness of a hydraulic chuck. Clamp directly on the cutting tool shank or use a reduction sleeve to hold a different diameter tool shank and increase transferable torque by approximately 25%. The reduction sleeve outside diameter must match your hydraulic chuck's nominal inside diameter. Reduction sleeves are available in 6 different O.D.s; 1/2\

18mm I.D. HSK-80A GUHRING Shrink Fit Holder With Conventional or MQL Coolant, 100mm Gage Length HSK-A to ISO12164-1 / DIN 69893-1 | Balanced to G2.5 / 25,000 RPM | Includes 4 or 6 M6 Balancing Screws | For Tool Shank Tolerance h6 | to DIN 69882-8 | Includes Setting Screw, Series No. 4977 or 4904 | For Conventional Cooling Order Coolant Supply Set, Series 4949 Separately | Suitable For Tools With Internal Coolant. A gripping principle: When shrink fitting tools into shrink fit chucks, the decisive factors for ensuring the safe clamping of the tool in the tool holder are solely the heating and cooling of the tool holder. The heating process expands the shrink fit chuck enabling a tool to be inserted or withdrawn respectively. During the cooling process it contracts again and clamps the inserted tool with maximum clamping force. Series No. 4736, Order Code 018.0800. Made in Germany, Guhring Part #9047360180800

18mm I.D. ISO/SK-40 GuhrOJet Peripheral Coolant-Fed Shrink Fit Holder, 80mm Gage Length ISO Taper to DIN 69871 Form AD/B | Balanced to G2.5 / 25,000 RPM | For Tool Shank Tolerance h6 | Includes 4 or 6 M6 Balancing Screws | Optimized For Cutting Tools Without Internal Coolant Ducts | With Coolant Ducts in the Bore For Directing Peripheral Coolant Directly to the Cutting Tool, Improving The Machining Process And Extending Tool Life | Includes Setting Screw, Series No. 4977 With Axial Force Dampening For Perfect Runout Accuracy. A gripping principle: When shrink fitting tools into shrink fit chucks, the decisive factors for ensuring the safe clamping of the tool in the tool holder are solely the heating and cooling of the tool holder. The heating process expands the shrink fit chuck enabling a tool to be inserted or withdrawn respectively. During the cooling process it contracts again and clamps the inserted tool with maximum clamping force. Series No. 4729, Order Code 018.0400. Made in Germany, Guhring Part #9047290180400

18mm I.D. ISO/SK-40 GuhrOJet Peripheral Coolant-Fed Weldon Side Lock Holder, 100mm Gage Length ISO Taper to DIN 69871 Form AD/B | Balanced to G6.3 / 15,000 RPM | For Tool Shank Tolerance h6 | Bore to DIN 1835-2 Form \

18mm I.D. ISO/SK-50 GUHRING Shrink Fit Holder With Conventional / MQL Coolant, 160mm Gage Length ISO Taper to DIN 69871 Form AD/B | Balanced to G2.5 / 25,000 RPM | For Tool Shank Tolerance h6 | Includes 4 or 6 M6 Balancing Screws | Includes Setting Screw, Series No. 4977 or 4904 | Suitable For Tools With Internal Coolant. A gripping principle: When shrink fitting tools into shrink fit chucks, the decisive factors for ensuring the safe clamping of the tool in the tool holder are solely the heating and cooling of the tool holder. The heating process expands the shrink fit chuck enabling a tool to be inserted or withdrawn respectively. During the cooling process it contracts again and clamps the inserted tool with maximum clamping force. Series No. 4738, Order Code 118.0500. Made in Germany, Guhring Part #9047381180500

18mm I.D. ISO/SK-50 GUHRING Shrink Fit Holder With Conventional / MQL Coolant, 80mm Gage Length ISO Taper to DIN 69871 Form AD/B | Balanced to G2.5 / 25,000 RPM | For Tool Shank Tolerance h6 | Includes 4 or 6 M6 Balancing Screws | Includes Setting Screw, Series No. 4977 or 4904 | Suitable For Tools With Internal Coolant. A gripping principle: When shrink fitting tools into shrink fit chucks, the decisive factors for ensuring the safe clamping of the tool in the tool holder are solely the heating and cooling of the tool holder. The heating process expands the shrink fit chuck enabling a tool to be inserted or withdrawn respectively. During the cooling process it contracts again and clamps the inserted tool with maximum clamping force. Series No. 4738, Order Code 018.0500. Made in Germany, Guhring Part #9047380180500

18mm I.D. ISO/SK-50 GUHRING Whistle Notch Side Lock Holder, Coolant Through, 63mm Gage Length SK to DIN ISO 7388-1 Form AD/B | With Bore to DIN 1835-2 Form E ?Whistle Notch\

18mm I.D. MAS/BT-30 AD GUHRING Weldon Side Lock Holder, 63mm Gage Length MAS/BT to JIS B 6339 | Coolant Form AD | This Holder Has Version AD Style Coolant Through The Tool Only, Without Coolant Supply Through the Flange and Without GuhrOJet | Balanced to G6.3 / 15,000 RPM | For Tool Shank Tolerance h6 | Bore to DIN 1835-2 Form \

18mm I.D. x 32mm Shank GUHRING Shrink Fit Extension, 4? Nose Angle, 27mm Nose Diameter, 160mm Overall Length 49mm Socket Depth For use in hydraulic chucks or shrink fit chucks | for carbide shanks to h6 diameter tolerance (from I.D. 14mm HSS also possible) | includes length setting screw | suitable for internal cooling. Series No. 4719, Order Code 018.1320. Made in Germany, Guhring Part #9047190181320

18mm Uni-Pro 2FL Necked 30? Helix X-Long Carbide End Mill, Plain Shank, Firex Coated, 65mm LOC, 150mm OAL, 100mm Reach 65MM LOC,20MM SHANK,150MM OAL UNI-PRO Right Hand 30? Helix, Right Hand Cut, 2 Flute Extra Long Length Universal General Purpose Center Cutting Carbide End Mill with .15mm x 45? Corner Chamfer, 100mm Extended Neck Relief, Plain Cylindrical Shank, Firex Coated Series 3021 Guhring Part #9030210180010

18mm Uni-Pro 4FL Ball, Necked 30? Std Length Carbide End Mill, Plain Shank, Firex Coated, 32mm LOC, 92mm OAL, 44mm Reach 32MM LOC,18MM SHANK,92MM OAL UNI-PRO Right Hand 30? Helix, Right Hand Cut, 4 Flute Ball Nose Standard Length Universal General Purpose Center Cutting Carbide End Mill, 44mm Extended Neck Relief, Plain Cylindrical Shank, Firex Coated Series 3727 Guhring Part #9037270180000

19.2mm Diameter HSS General Purpose 118? Point Jobber Length Drill, Steam Oxide Finish, 140mm LOC, 205mm OAL 140mm LOC,205mm OAL,19.2mm Shank Series No. 205, Order Code 19.200, Guhring Part #9002050192000

19.3mm Carbide 140? Point RT100HF 3xD nano-Si? Coated Coolant Fed Drill, Reinforced Straight Shank, 79mm LOC 79mm LOC,131mm OAL,20mm Shank Series No. 8520, Order Code 19.300, Guhring Part #9085200193000

19.3mm Carbide 140? Point RT100HF 5xD nano-Si? Coated Coolant Fed Drill, Reinforced Straight Shank, 101mm LOC 101mm LOC,153mm OAL,20mm Shank Series No. 8521, Order Code 19.300, Guhring Part #9085210193000

19.50mm - 19.99mm Insert Range, 20mm Shank, HT800WP 3XD Indexable Drill Body, Coolant Fed, Nickel Coated 63.7mm LOC,146mm OAL,20mm Shank Spiral Flute Tool Steel Drill Body with Reinforced Straight Shank and Whistle-Notch Flat per DIN 6535-HE Series No. 4107, Order Code 19.500, Guhring Part #9041070195000

19.5mm Carbide 140? Point RT100U 5xD Firex? Coolant Fed Drill, Reinforced Whistle-Notch Flat Shank, 101mm LOC 101mm LOC,153mm OAL,20mm Shank Series No. 5611, Order Code 19.500, Guhring Part #9056110195000

19.5mm Carbide Radius Point RT100R 7xD Firex? Coated Coolant Fed Drill, Reinforced Straight Shank, 190mm LOC 190mm LOC,244mm OAL,20mm Shank Series No. 6502, Order Code 19.500, Guhring Part #9065020195000

19.5mm Diameter Carbide 140? Point RT100U 3xD nano-Firex? Coated Drill, Reinforced Straight Shank, 79mm LOC 79mm LOC,131mm OAL,20mm Shank Series No. 5514, Order Code 19.500, Guhring Part #9055140195000

19.5mm Diameter General Purpose Cobalt 118? Point Angle Jobber Length Drill, Steam Oxide Finish, 140mm LOC 140mm LOC,205mm OAL,19.5mm Shank Series No. 305, Order Code 19.500, Guhring Part #9003050195000

19.5mm Diameter HSS 118? Point General Purpose Stub Length Drill, Steam Oxide Finish, 66mm LOC, 131mm OAL 66mm LOC,131mm OAL,19.5mm Shank Series No. 223, Order Code 19.500, Guhring Part #9002230195000

19.5mm Diver 4FL Variable Helix Necked Carbide End Mill, Plain Cylindrical Shank, Nano-Si Coated, 38MM LOC, 51.1MM Reach 38MM LOC,20MM SHANK,104MM OAL RF 100 Diver 4 Flute Right Hand 36?/38?/37?/38? Variable Helix, Right Hand Cut, Plain Cylindrical Shank, Extended Neck Relief Center Cutting Carbide End Mill with .20mm x 45? Corner Chamfer for High Performance Ramping, Slotting, Plunging, Helical Interpolation Roughing & Finishing Steel, Stainless Steel, Cast Iron, Nickel/Titanium Alloys & Aluminum Series 6737 Guhring Part #9067370195000

19.5mm HSS 118? Point, #2 Morse Taper Shank Extra Length Series #1 Drill, Steam Oxide Finish, 260mm LOC 260mm LOC,385mm OAL,MT2 Shank Series No. 266, Order Code 19.500, Guhring Part #9002660195000

19.5mm HSS 130? Point, #2 MT Shank, GT100 Parabolic Flute Extra Length Series #1 Drill, Steam Oxide Finish, 260mm LOC 260mm LOC,385mm OAL,MT2 Shank Series No. 526, Order Code 19.500, Guhring Part #9005260195000

19.75mm Diameter HSS General Purpose 118? Point Jobber Length Drill, Steam Oxide Finish, 140mm LOC, 205mm OAL 140mm LOC,205mm OAL,19.75mm Shank Series No. 205, Order Code 19.750, Guhring Part #9002050197500

19.8mm HSS General Purpose Morse Taper Shank #2, 118? Point Jobber Length Drill, Steam Oxide Finish, 140mm LOC 140mm LOC,238mm OAL,MT2 Shank Series No. 245, Order Code 19.800, Guhring Part #9002450198000

19/32\

19/64\

19mm Carbide 120? Point RT100GG 7xD Coolant Fed Straight Flute Drill, Reinforced Straight Shank, 190mm LOC 190mm LOC,244mm OAL,20mm Shank Series No. 769, Order Code 19.000, Guhring Part #9007690190000

19mm Carbide 140? Point RT100U 3xD nano-Firex Coolant Fed Drill, Reinforced Whistle-Notch Flat Shank, 79mm LOC 79mm LOC,131mm OAL,20mm Shank Series No. 5610, Order Code 19.000, Guhring Part #9056100190000

19mm Carbide 140? Point RT100U 3xD nano-Firex? Coated Coolant Fed Drill, Reinforced Straight Shank, 79mm LOC 79mm LOC,131mm OAL,20mm Shank Series No. 5510, Order Code 19.000, Guhring Part #9055100190000

19mm Carbide 140? Point RT100VA 5xD nano-A? Coated Coolant Fed Drill, Reinforced Straight Shank, 101mm LOC 101mm LOC,153mm OAL,20mm Shank Series No. 8511, Order Code 19.000, Guhring Part #9085110190000

19mm Carbide 3 Flute 150? Point GS200U 5xD High Precision Drill, Reinforced Shank, TiN Coated, 76mm LOC 76mm LOC,127mm OAL,19mm Shank Series No. 609, Order Code 19.000, Guhring Part #9006090190000

19mm Diameter HSS 118? Point General Purpose Stub Length Drill, Steam Oxide Finish, 64mm LOC, 127mm OAL 64mm LOC,127mm OAL,19mm Shank Series No. 223, Order Code 19.000, Guhring Part #9002230190000

19mm Diameter HSS 130? Point GT80 Parabolic Flute Stub Length Drill, Steam Oxide Finish, 64mm LOC, 127mm OAL 64mm LOC,127mm OAL,19mm Shank Series No. 552, Order Code 19.000, Guhring Part #9005520190000

19mm HSS 130? Point, #2 MT Shank, GT100 Parabolic Flute Extra Length Series #1 Drill, Steam Oxide Finish, 245mm LOC 245mm LOC,370mm OAL,MT2 Shank Series No. 526, Order Code 19.000, Guhring Part #9005260190000

19mm HSS General Purpose Bushing Length Drill, Morse Taper #2 Shank, 118? Point, Steam Oxide Finish, 171mm LOC 171mm LOC,269mm OAL,MT2 Shank Series No. 257, Order Code 19.000, Guhring Part #9002570190000

19mm Shank Adj Torque Control GUHRING Quick Change Tap Adaptor For DIN Standard Taps: M4.5, M5, M6, M7, M8 06.0mm Shank,04.9mm Square,DIN Standard Suitable for central coolant through to maximum pressure 50 bar. Series No. 4206, Order Code 019.0600. Made in Germany, Guhring Part #9042060190600

19mm Shank Adj Torque Control GUHRING Quick Change Tap Adaptor For JIS Standard Taps: M5 05.5mm Shank,04.5mm Square,JIS Standard Suitable for central coolant through to maximum pressure 50 bar. Series No. 4206, Order Code 019.0550. Made in Germany, Guhring Part #9042060190550

1mm Diameter HSS 130? Point GT50 Deep Hole Parabolic Flute Taper Length Drill, Bright Finish, 33mm LOC, 56mm OAL 33mm LOC,56mm OAL,1mm Shank Series No. 501, Order Code 01.000, Guhring Part #9005010010000

1mm Diameter HSS High Helix 130? Point Angle Jobber Length Drill, Bright Finish, 12mm LOC 12mm LOC,34mm OAL,1mm Shank Series No. 207, Order Code 01.000, Guhring Part #9002070010000

1mm Width, 1.2mm Depth, GUHRING I.D. Full Radius Groove LH System 106 Insert, 22mm Reach, 5mm Min Bore, Uncoated 1.00mm Width,1.20mm Depth,22mm Reach GE106.0100.050.22.50.L, Uncoated Type GE106 Guhring Micro-Precision System 106 Carbide Stick Insert with 6mm Quick Change Shank For Internal Grooving Full Radius Slots. Guhring Series No. 25887 Order Code 6.030 Made in Germany, Guhring Part #9258870060300

1mm Width, 1.2mm Depth, GUHRING I.D. Full Radius Groove RH System 106 Insert, 17mm Reach, 5mm Min Bore, Uncoated 1.00mm Width,1.20mm Depth,17mm Reach GE106.0100.050.17.50.R, Uncoated Type GE106 Guhring Micro-Precision System 106 Carbide Stick Insert with 6mm Quick Change Shank For Internal Grooving Full Radius Slots. Guhring Series No. 25886 Order Code 6.020 Made in Germany, Guhring Part #9258860060200

1mm Width, 1.2mm Depth, GUHRING I.D. Full Radius Groove RH System 106 Insert, 22mm Reach, 5mm Min Bore, Nano-A Coated 1.00mm Width,1.20mm Depth,22mm Reach GE106.0100.050.22.50.R, Nano-A Coated Type GE106 Guhring Micro-Precision System 106 Carbide Stick Insert with 6mm Quick Change Shank For Internal Grooving Full Radius Slots. Guhring Series No. 25882 Order Code 6.030 Made in Germany, Guhring Part #9258820060300

1mm Width, 1.2mm Depth, GUHRING I.D. Straight Groove LH System 106 Insert, 12mm Reach, 5mm Min Bore, Uncoated 1.00mm Width,1.20mm Depth,12mm Reach GE106.0100.000.12.50.L, Uncoated Type GE106 Guhring Micro-Precision System 106 Carbide Stick Insert with 6mm Quick Change Shank For Internal Grooving Straight Slots. Guhring Series No. 25879 Order Code 6.010 Made in Germany, Guhring Part #9258790060100

1mm Width, 1.2mm Depth, GUHRING I.D. Straight Groove LH System 106 Insert, 27mm Reach, 5mm Min Bore, Uncoated 1.00mm Width,1.20mm Depth,27mm Reach GE106.0100.000.27.50.L, Uncoated Type GE106 Guhring Micro-Precision System 106 Carbide Stick Insert with 6mm Quick Change Shank For Internal Grooving Straight Slots. Guhring Series No. 25879 Order Code 6.040 Made in Germany, Guhring Part #9258790060400

1mm Width, 1.2mm Depth, GUHRING I.D. Straight Groove RH System 106 Insert, 37mm Reach, 5mm Min Bore, Uncoated 1.00mm Width,1.20mm Depth,37mm Reach GE106.0100.000.37.50.R, Uncoated Type GE106 Guhring Micro-Precision System 106 Carbide Stick Insert with 6mm Quick Change Shank For Internal Grooving Straight Slots. Guhring Series No. 25878 Order Code 6.060 Made in Germany, Guhring Part #9258780060600

1mm Width, 2mm Depth, GUHRING I.D. Full Radius Groove LH System 106 Insert, 42mm Reach, 6mm Min Bore, Nano-A Coated 1.00mm Width,2.00mm Depth,42mm Reach GE106.0100.050.42.60.L, Nano-A Coated Type GE106 Guhring Micro-Precision System 106 Carbide Stick Insert with 6mm Quick Change Shank For Internal Grooving Full Radius Slots. Guhring Series No. 25759 Order Code 6.007 Made in Germany, Guhring Part #9257590060070

2-56 or 3-56 Carbide 3 Tooth Profile 3xD Micro-Thread Mill, 4 Flutes, TiCN Coated Plain Cylindrical Shank,No Countersink,No Coolant Through Series No. 4223, Order Code 02.1840, Guhring Part #9042230021840

2-56 Pionex Cut Tap, HSS-E, TiALN Coated Series No. 391 , Order Code 2.184, Guhring Part #9003910021840

2.00mm Pitch Full Profile GUHRING O.D. Thread Turning System 305 RH Insert, Metric, Firex Coated 2.00mm Pitch,0.28mm Radius,1.45mm Max Thread Depth GG305.VM00.200.AA.04.R, Firex Coated Type GG305 Guhring Grooving, Threading & Parting Off System 305 Carbide Triangle Insert for Full Profile Metric Threads. Guhring Series No. 25662 Order Code 12.050 Made in Germany, Guhring Part #9256620120500

2.00mm Width GUHRING Broach System 106 Insert, 0.10mm Radius, 6.0mm Min Bore, Nano-A Coated 2.00mm Width,Tolerance Class JS9,11.5mm Max Depth GN106.0200.010.12.06.N, Nano-A Coated Type GN106 Guhring Micro-Precision System 106 Carbide Stick Insert with 6mm Quick Change Shank For Longitudinal Broaching, 11.50mm Maximum Reach. Guhring Series No. 25817 Order Code 6.001 Made in Germany, Guhring Part #9258170060010

2.00mm Width GUHRING Broach System 106 Insert, 0.10mm Radius, 6.0mm Min Bore, Uncoated 2.00mm Width,Tolerance Class JS9,11.5mm Max Depth GN106.0200.010.12.06.N, Uncoated Type GN106 Guhring Micro-Precision System 106 Carbide Stick Insert with 6mm Quick Change Shank For Longitudinal Broaching, 11.50mm Maximum Reach. Guhring Series No. 25819 Order Code 6.001 Made in Germany, Guhring Part #9258190060010

2.02mm Diameter Cobalt Type Ti 130? Split Point Jobber Length Drill, Bright Finish, 24mm LOC, 49mm OAL 24mm LOC,49mm OAL,2.02mm Shank Series No. 605, Order Code 02.020, Guhring Part #9006050020200

2.02mm Diameter General Purpose Cobalt 118? Point Angle Jobber Length Drill, Bright Finish, 24mm LOC 24mm LOC,49mm OAL,2.02mm Shank Series No. 305, Order Code 02.020, Guhring Part #9003050020200

2.05mm Diameter Cobalt 130? Point GT100 Parabolic Flute Taper Length Drill, Bright Finish, 56mm LOC, 85mm OAL 56mm LOC,85mm OAL,2.05mm Shank Series No. 336, Order Code 02.050, Guhring Part #9003360020500

2.05mm Diameter HSS 118? Point General Purpose Taper Length Drill, Bright Finish, 56mm LOC, 85mm OAL 56mm LOC,85mm OAL,2.05mm Shank Series No. 317, Order Code 02.050, Guhring Part #9003170020500

2.05mm Diameter HSS 118? Point General Purpose Taper Length Drill, TiN Coated, 56mm LOC, 85mm OAL 56mm LOC,85mm OAL,2.05mm Shank Series No. 667, Order Code 02.050, Guhring Part #9006670020500

2.05mm Diameter HSS Left Hand Cut 130? Point GT100 Parabolic Flute Jobber Length Drill, Bright Finish, 24mm LOC 24mm LOC,49mm OAL,2.05mm Shank Series No. 550, Order Code 02.050, Guhring Part #9005500020500

2.05mm Micro-Precision Va Drill, 6xd, Coolant Through, Perrox Coated

2.0mm - 2.5mm Width Square GUHRING I.D. Square Broaching System 104 Insert, 3.5mm Max Depth, TiN Coated Square,2.0mm - 2.5mm Width,3.5mm Depth GN104.4545.005.04.20.N, TiN Coated Type GN104 Guhring Micro-Precision System 104 Carbide Stick Insert with 4mm Quick Change Shank For Square Broaching. Guhring Series No. 25232 Order Code 4.002 Made in Germany, Guhring Part #9252320040020

2.0mm Min Bore GUHRING 45 Deg Chamfer/Bore RH System 104 Insert, 0.50mm (t-max) Offset, 12mm Reach, Uncoated Right Hand,0.10mm Radius,Bright Uncoated GT104.4518.010.12.20.R, Uncoated Type GT104 Guhring Micro-Precision System 104 Carbide Stick Insert with 4mm Quick Change Shank For Boring & Chamfering 45? Both Sides. Guhring Series No. 25120 Order Code 4.003 Made in Germany, Guhring Part #9251200040030

2.0mm Min Bore GUHRING Back-Bore/Profile LH System 104 Insert, 0.30mm (t-max) Offset, 12mm Reach, TiN Coated Left Hand,0.10mm Radius,TiN Coated GT104.3217.010.12.20.L, TiN Coated Type GT104 Guhring Micro-Precision System 104 Carbide Stick Insert with 4mm Quick Change Shank For Back Boring & Profiling. Guhring Series No. 25107 Order Code 4.003 Made in Germany, Guhring Part #9251070040030

2.0mm Min Bore GUHRING Back-Bore/Profile LH System 104 Insert, 0.30mm (t-max) Offset, 12mm Reach, Uncoated Left Hand,0.10mm Radius,Bright Uncoated GT104.3217.010.12.20.L, Uncoated Type GT104 Guhring Micro-Precision System 104 Carbide Stick Insert with 4mm Quick Change Shank For Back Boring & Profiling. Guhring Series No. 25113 Order Code 4.003 Made in Germany, Guhring Part #9251130040030

2.0mm Min Bore GUHRING Back-Bore/Profile LH System 104 Insert, 0.30mm (t-max) Offset, 4mm Reach, Nano-A Coated Left Hand,0.10mm Radius,TiAlN Coated GT104.3217.010.04.20.L, Nano-A Coated Type GT104 Guhring Micro-Precision System 104 Carbide Stick Insert with 4mm Quick Change Shank For Back Boring & Profiling. Guhring Series No. 25109 Order Code 4.001 Made in Germany, Guhring Part #9251090040010

2.0mm Min Bore GUHRING Back-Bore/Profile LH System 104 Insert, 0.30mm (t-max) Offset, 7mm Reach, Nano-A Coated Left Hand,0.10mm Radius,TiAlN Coated GT104.3217.010.07.20.L, Nano-A Coated Type GT104 Guhring Micro-Precision System 104 Carbide Stick Insert with 4mm Quick Change Shank For Back Boring & Profiling. Guhring Series No. 25109 Order Code 4.002 Made in Germany, Guhring Part #9251090040020

2.0mm Min Bore GUHRING Bore/Profie RH Wiper System 104 Insert, 0.15mm (t-max) Offset, 7mm Reach, Uncoated Right Hand,0.10mm Radius,Bright Uncoated GJ104.2319.010.07.20.R, Uncoated Type GJ104 Guhring Micro-Precision System 104 Carbide Stick Insert with 4mm Quick Change Shank For Boring & Profiling with Wiper Geometry. Guhring Series No. 25096 Order Code 4.002 Made in Germany, Guhring Part #9250960040020