The #1 selling therapeutic overlay in the US, Geo-Matt is used by thousands of hospitals and nursing homes nationwide. It has been proven effective in clinical trials and studies as an aid in the prevention and treatment of pressure ulcers.The top surface is cut using our exclusive Geo-Matt design, which creates more than 800 individually responsive foam cells that are anatomically sized to the area of the body they carry. This zoned design delivers the ideal support characteristics needed at the head, torso, and lower extremities. By independently absorbing pressure points, the cells allow the Geo-Matt to customize its support to the body's natural curvature while minimizing the effects of pressure and shearing. In addition, Geo-Matt's exclusive "Ring-of-Air " feature helps to ventilate the surface, channeling heat away from the patient to minimize perspiration build-up.GeoMatt Cut Foam Top: The Geo-Matt style foam topper is a high density, medical grade foam. The unique geometric design consists of over 800 individual cells, each of which acts individually to redistribute pressure, to reduce heat and moisture buildup on the skin, and to reduce shear to underlying tissues. This foam overlay is 3.5 in height.Upper head section and lower foot section: Cells are smaller at the head and foot section to disperse pressure over these sensitive areas.Body Section: Cells are larger to provide pressure dispersion over the torso.Inset of Geo-Matt Close-Up: The unique Ring-of-Air performs several functions. It allows each cell to act individually to conform to the body. It assists in removing heat and moisture from the body by channeling heat and vapor away. And it reduces shearing by allowing the individual cells to move independently, reducing pull on the skin.SpecificationsWeight Limit: 250 lbsStandard Sizes: Full (Double - 52"W x 72"L); Queen (58"W x 75"L) & King (74"W x 75"L)1 Each / Each
The 5x1 HDMI / HDBT Presentation switch is a compact scaler switcher with 5 video inputs (3 HDMI, 2 VGA) and 6 audio inputs (3 HDMI audio & 2 VGA with audio switched following the video; 1 MIC audio input). The VGA input supports VGA, Component Video (YPbPr) and Composite Video.</p><p>The 5x1 HDMI / HDBT Presentation switch scales & switches any video signal to HDMI output and HDBaseT output for a transmission over up to 70 m of Cat5e/6 with PoC support.</p><p>With 1 IR Sensor, 5 IR Emitters and 1 RS232 port, bidirectional IR & RS232 signals can be transmitted simultaneously between the 5x1 HDMI / HDBT Presentation switch and the HDMI Extender PoC/PoE Receiver.</p><p>Applications: computer realm, monitoring, conference room and conference centres, corporate boardrooms, hotels and hospitality rooms, big screen displaying, television education, command & control centres and smart homes</p>
The 6G-SDI Extender over Fiber Optic is a unique solution from MuxLab for extending SDI cameras or other SDI sources in up to 4K resolutions to a distance of up to 985ft (300m) using OM3 fiber (model 500732), up to 1300ft (400m) using OM4 fiber (model 500732), up to 33,000ft ?(10km) using single mode fiber (model 500732-SM10), up to 132,000ft (40km) using single mode fiber (model 500732-SM40), and up to 264,000ft (80km) using single mode fiber (model 500732-SM80). This product allows for versatile combinations of sources, such as one 6G SDI source, two 3G-SDI sources, or four HD-SDI sources.</p>
The 6G-SDI Extender over Fiber Optic is a unique solution from MuxLab for extending SDI cameras or other SDI sources in up to 4K resolutions to a distance of up to 985ft (300m) using OM3 fiber, 1300ft (400m) using OM4 fiber, 33,000ft (10km) using single mode fiber - model 500732-SM10 and 132,000ft (40km) using single mode fiber - model 500732-SM40. This product allows versatile combinations of sources such as one 6G SDI source, two 3G-SDI sources or four HD-SDI sources.</p><p><strong>Applications:</strong><br />Video production, Broadcasting, Outside Broadcasting vehicle, HD camcorder, Studio-to-studio, Post production, Live events, Medical imaging display, Mobile video</p>
The 6G-SDI Extender over Fiber Optic with Return Channel is a unique solution from MuxLab for extending SDI cameras or other SDI sources in up to 4K resolutions to a distance of up to 400m (1300ft) using OM4 multi-mode fiber (model 500734), 10km (33,000ft) using single-mode fiber (model 500734-SM10), 40km (132,000ft) using single-mode fiber (model 500734-SM40), and 80km (264,000ft) using single-mode fiber (model 500734-SM80). <strong>Uses both Singlemode and Multimode.</strong></p><p>The product supports multichannel transmission, and can simultaneously transmit up to 9Gbps of data throughout over the fiber link, and allows for versatile combinations of sources, including 6G-SDI, 3G-SDI and HD-SDI. The unit supports simultaneous transmission of mixed signals such as one 6G-SDI signal + one 3G-SDI, or two 3G-SDI signals + two HD-SDI signals, and many other combinations up to 9Gbps. The device supports one input and one output SDI port, plus three directional SDI ports that can be individually configured as input or output. This flexibility allows for up to four source ports and one return channel, or up to one source port and four return channels, or anything in between. The SDI return channel may be used for AV monitoring and talk-back, while the RS232 pass-through supports return of tally light, camera control unit (CCU) and control of end devices.</p><p><strong>Please Note:</strong> OM3 fiber cable is fully compatible with OM4 components.</p>
The 6G-SDI Extender over Fiber Optic with Return Channel is a unique solution from MuxLab for extending SDI cameras or other SDI sources in up to 4K resolutions to a distance of up to 400m (1300ft) using OM4 multi-mode fiber (model 500734), 10km (33,000ft) using single-mode fiber (model 500734-SM10), 40km (132,000ft) using single-mode fiber (model 500734-SM40), and 80km (264,000ft) using single-mode fiber (model 500734-SM80).</p><p>The product supports multichannel transmission, and can simultaneously transmit up to 9Gbps of data throughput over the fiber link, and allows for versatile combinations of sources, including 6G-SDI, 3G-SDI and HD-SDI. The unit supports simultaneous transmission of mixed signals such as one 6G-SDI signal + one 3G-SDI, or two 3G-SDI signals + two HD-SDI signals, and many other combinations up to 9Gbps. The device supports one input and one output SDI port, plus three directional SDI ports that can be individually configured as input or output. This flexibility allows for up to four source ports and one return channel, or up to one source port and four return channels, or anything in between. The SDI return channel may be used for AV monitoring and talk-back, while the RS232 pass-through supports return of tally light, camera control unit (CCU) and control of end devices.</p>
The 6G-SDI Extender over Fiber Optic with Return Channel is a unique solution from MuxLab for extending SDI cameras or other SDI sources in up to 4K resolutions to a distance of up to 400m (1300ft) using OM4 multi-mode fiber (model 500734), 10km (33,000ft) using single-mode fiber (model 500734-SM10), 40km (132,000ft) using single-mode fiber (model 500734-SM40), and 80km (264,000ft) using single-mode fiber (model 500734-SM80).</p><p>The product supports multichannel transmission, and can simultaneously transmit up to 9Gbps of data throughput over the fiber link, and allows for versatile combinations of sources, including 6G-SDI, 3G-SDI and HD-SDI. The unit supports simultaneous transmission of mixed signals such as one 6G-SDI signal + one 3G-SDI, or two 3G-SDI signals + two HD-SDI signals, and many other combinations up to 9Gbps. The device supports one input and one output SDI port, plus three directional SDI ports that can be individually configured as input or output. This flexibility allows for up to four source ports and one return channel, or up to one source port and four return channels, or anything in between. The SDI return channel may be used for AV monitoring and talk-back, while the RS232 pass-through supports return of tally light, camera control unit (CCU) and control of end devices.</p>
The <b>Movo WS-GS Series Windscreen</b> is part of our professional line of windscreens and features a dual artificial fur outer layer, acoustic foam inner layer, and airtight rubber base for maximum 360 wind protection. <br /> <br /> <b>How to measure</b> <br /> First, ensure that your microphone capsule is between 18-23mm in dimeter. Then, determine the length you need by measuring from the front-end of the capsule to the end of the grille (vents), and add about 1cm to that measurement to ensure a full seal. <br /> <br /> <b>Compatibility</b> (including but not limited to) <br /> Audio-Technica: AT 4073a (BP4073), AT 875 (AT875R), AT 877 <br /> DPA: 4017 <br /> Schoeps: CMIT 5U <br /> Sennheiser: MKH 8060 + MZF + MZX + MZL <br /> Sony: ECM 673, ECM 674, NEX-FS700RH, PXW-FS7/7K, PXW-X180, PMW-F5/55 <br /> <br /> <br />