The NICOR LED Step Light with built in Photocell is a great complement for your residential and commercial projects. This Step Light not only provides a touch of safety, but it offers a warm, natural glow making it a perfect accent for any project. The built-in Photocell acts like a Dusk-to-Dawn Sensor that automatically turns the Step Light ON when it gets dark, and OFF when light is present. The LED Step Light offers energy savings (using only 1.2 Watts) over the life-span calculated at over 50,000 hours. This Step Light is sealed and approved for use in wet locations, making it ideal for outdoor use on decks, porches, and pathways. Its also ideal to use indoors to light up hallways, stairways, or as a simple night light. The LED Step lights are available in White, Black, Nickel, and Oil-Rubbed Bronze Faceplates in either Vertical or Horizontal orientations. If you need a specific color, the White faceplates are also paintable. The Step Light features a warm 2700K color temperature. Protected by NICOR's 5 year limited warranty. <br /> <br />Features: <br /> - Includes an LED Photocell Module, a White Vertical Faceplate, and a White Horizontal Oriented Faceplate <br /> - Photocell sensor comes pre-installed, and the energy savings dusk to dawn feature turns the LEDs on when its dark and off when there is light <br /> - Modular design allows fixture to be mounted in horizontal or vertical orientation <br /> - Constructed with die-stamped aluminum and powder-coated faceplates. <br /> - The Louvered faceplate design conceals LED's from direct line of sight while maximizing wide light distribution <br /> - The High Efficiency LED Step Light is maintenance-free and fully sealed to keep out water, dust, and the other elements. <br /> - The performance grade LED's and electrical driver provides optimal light output while using only 1.2 Watts of energy. <br /> - TM-21 Projected L70(6k) life 50,000 hours <br /> - Uses standard household Input voltage of 120V <br /> - Protected by NICOR's 5 year limited warranty <br /> <br />Specs: <br /> Finish: White <br /> Product Type: LED Step Light <br /> Size: 4.5" <br /> Application: Residential <br /> Watts: 1W <br /> Volt: 120V <br /> Light Output (LM): 19 <br /> Color Temperature: 2700K <br /> Dimmable: No <br /> Bulbtype: LED <br /> Ratelife: >50,000 <br /> Bulbs Included?: Yes <br /> Recommended Bulb Type: LED <br /> Hardwire/Plug/Socket: Hardwire <br /> Product Length: 4.6 <br /> Product Width: 2.75 <br /> Product Depth: 2 <br /> Product Weight: 0.3 <br /> Limited Manufacturer Warranty (Year): 5 <br /> <br /> Certification: <br />-UL/cUL <br />- Energy Star Qualified: No <br />-FCC <br />-Wet Rated <br /> <br /> <br />
The NOCO G750 features a high-frequency, high-efficiency switch-mode design, resulting in a charger that's compact and lightweight. An auto-memory function returns the charger to the last selected mode when you restart it. Thanks to NOCO's Rapid Charging Technology, the G750 charges batteries two times faster than traditional linear battery chargers. With Abnormality Protection, the charger automatically shuts off if it's been left in bulk charge mode for an extended period of time. The charger is also designed to adjust automatically to changing current needs and prevent reverse polarity, short circuits, open circuits, sparks, overheating, over-currents, and overcharging. The NOCO G750 uses a five-step process to charge and maintain your battery. First, it checks your battery's voltage to make sure that the connections is good and that the battery is in stable condition before beginning the charge process. Second, it begins a bulk-charging process with a gentle (soft) charge. Third, it continues bulk-charging and returns 90-percent of the battery's capacity. Fourth, it brings the charge level to 100-percent by delivering small amounts of current to provide a safe, efficient charge and limit battery gassing. And fifth, it monitors the battery voltage to determine whether a maintenance charge should be initiated. The maintenance cycle is repeated to keep the battery at full charge, without overcharging, and the charger can be left connected indefinitely.
The NOCO GEN1 on-board battery charger uses an eight-step process to charge and maintain your battery. First, it checks your battery's voltage to make sure that the connections is good and that the battery is in stable condition before beginning the charge process. Second, it begins a bulk-charging process with a gentle (soft) charge. The process then continues and returns 80-percent of the battery's capacity. Next, it switches to a constant current charge rate to bring your battery close to a 90-percent charge, then charges low current levels until the battery has reached 95-percent of its capacity. From there, the charger initiates a top-off charge to bring the battery to 100-percent. Finally, the GEN1 shuts off but constantly monitors your battery by providing a gentle charge every 24 hours for maximum battery life. The NOCO GEN1 on-board battery charger is backed by a three-year limited warranty. Keep your vehicle batteries charged and maintained with ease using the NOCO GEN1. This one-bank, 10-Amp, fully automatic charger is designed to be used with batteries from 25Ah to 230Ah, such as those found in boats, golf carts, UTVs, ATVs, tractors, or generators. The GEN1 uses a thorough eight-step process to charge and maintain your battery and features a switch-mode design, resulting in a charger that's small and lightweight.
The NOCO GEN2 on-board battery charger uses an eight-step process to charge and maintain your battery. First, it checks your battery's voltage to make sure that the connections is good and that the battery is in stable condition before beginning the charge process. Second, it begins a bulk-charging process with a gentle (soft) charge. The process then continues and returns 80-percent of the battery's capacity. Next, it switches to a constant current charge rate to bring your battery close to a 90-percent charge, and then charges a low current levels until the battery has reached 95-percent of its capacity. From there, the charger initiates a top-off charge to bring the battery to 100-percent. Finally, the GEN2 shuts off but constantly monitors your battery by providing a gentle charge every 24 hours for maximum battery life. The NOCO GEN2 on-board battery charger is backed by a three-year limited warranty. Keep your vehicle batteries charged and maintained with ease using the NOCO GEN2. This two-bank, 20-amp, fully automatic charger is designed to be used with batteries from 25Ah to 230Ah, such as those found in boats, golf carts, UTVs, ATVs, tractors, or generators. The GEN2 uses a thorough eight-step process to charge and maintain your battery and features a switch-mode design, resulting in a charger that's small and lightweight.
The NOCO GEN4 on-board battery charger uses an eight-step process to charge and maintain your battery. First, it checks your battery's voltage to make sure that the connections is good and that the battery is in stable condition before beginning the charge process. Second, it begins a bulk-charging process with a gentle (soft) charge. The process then continues and returns 80-percent of the battery's capacity. Next, it switches to a constant current charge rate to bring your battery close to a 90-percent charge, and then charges low current levels until the battery has reached 95-percent of its capacity. From there, the charger initiates a top-off charge to bring the battery to 100-percent. Finally, the GEN4 shuts off but constantly monitors your battery by providing a gentle charge every 24 hours for maximum battery life. The NOCO GEN4 on-board battery charger is backed by a three-year limited warranty. Keep your vehicle batteries charged and maintained with ease using the NOCO GEN4. This two-bank, 20-amp, fully automatic charger is designed to be used with batteries from 25Ah to 230Ah, such as those found in boats, golf carts, UTVs, ATVs, tractors, or generators. The GEN4 uses a thorough eight-step process to charge and maintain your battery and features a switch-mode design, resulting in a charger that's small and lightweight.
The Norsk 240151 Interlocking Foam Mats are made from recycled materials to providing a environmentally friendly flooring solution for your garage, basement or any other room of your house. These foam mats will endure years of use and have anti-slip texture on both sides. This foam mat assembles easily like other flooring options including, puzzle mats, foam tiles, garage tiles and foam play mats. This 4-piece set is reversible giving you the option of all multi-colored mats or all gray mats. We also include (8) straight borders to provide a finished, uniformed look. Ideal for use in homes, garages, day cares, play areas, workshops, fitness rooms, camping and recreational areas. Patents US 9,289,085; US D532,238; US D543,764 and Patents Pending.
The Norsk 240275 Interlocking Foam Mats are made from recycled materials to providing a environmentally friendly flooring solution for your garage, basement or any other room of your house. These foam mats will endure years of use and have anti-slip texture on both sides. This foam mat assembles easily like other flooring options including, puzzle mats, foam tiles, garage tiles and foam play mats. This 4-piece set is reversible, allowing you the option of all gray, all black or a checkerboard pattern. We also include (8) straight edge borders to provide a finished, uniformed look. This thicker grade mat has a patented reversible design making it functional for an infinite variety of uses and applications. Patents US 9,289,085; US D532,238; US D543,764 and Patents Pending.
The NuMax S50LSDH Pneumatic 2-in-1 15.5-Gauge and 16-Gauge 2" Dual Handle Flooring Nailer and Stapler is an excellent choice when installing most 1/2" to 3/4" solid or engineered tongue and groove flooring including cherry, oak, maple, and walnut along with bamboo or exotic flooring. This air powered flooring nailer and stapler combo tool comes with three interchangeable base plates, and is compatible with 16 gauge L-cleats from 1-1/2" to 2" and 15.5 gauge 1/2" crown staples from 1-1/2" to 2". The dual handle design allows you to use either the short handle or extended handle, depending on whether you prefer to kneel or stand during installation. This convenient option combined with a light strike bumper will really save your back and reduce fatigue when working for long shifts. The semi-quick release nose allows for easy jam removal in the event of a jammed fastener and increases productivity. Professional results are ensured with a no mar foot to protect finished working surfaces. Boasting a lightweight and durable aluminum body, aluminum cylinder, and high quality rubber O-rings, this nailer is designed to last. This combo flooring nailer and stapler is perfect for DIYers tackling home improvement and repair projects, as well as professional contractors at the job site. The Pneumatic 2-in-1 15.5-Gauge and 16-Gauge 2" Dual Handle Flooring Nailer and Stapler includes a mallet with a rubber head, three interchangeable base plates, air tool oil, and adjustment tools
The Nuvo 62/1145R1 2-Light Outdoor LED Up-or-Down Wall Sconce offers a high-efficiency outdoor solution for residential or commercial lighting applications such as entrances, hallways, lobbies, patios, pools, detached garages and more. The versatile up or down mount allows light to be directed where you need it. Made of a durable die-cast aluminum body, the 120-277V sconce features 2KV surge protection, a UV-stabilized powder coated finish, and is suitable for wet location use. The 10-watt bulbs deliver 3000K, 90 CRI, and 900 lumens of brightness for a warm white light rated for 50,000 hours. The Nuvo 62/1145R1 is ENERGY STAR certified, cULus listed, and comes with a 5 Year warranty.