Comment (page 1 / 2)

"F" is stamped on connectors following M24308 part number as required. "F" designates cadmium shell plating., Size 22 sockets supplied with receptacles are loose piece.
"Z" is stamped on connectors following M24308 part number as required. "Z" designates zinc shell plating.
"Z" is stamped on connectors following M24308 part number as required. "Z" designates zinc shell plating., Meets Solderability Per MIL-STD-202, Method 208
"Z" is stamped on connectors following M24308 part number as required. "Z" designates zinc shell plating., Size 20 contacts supplied with connectors are loose piece.
"Z" is stamped on connectors following M24308 part number as required. "Z" designates zinc shell plating., Size 22 pins supplied with plugs are loose piece.
"Z" is stamped on connectors following M24308 part number as required. "Z" designates zinc shell plating., Size 22 sockets supplied with receptacles are loose piece.
(On) indicates momentary position.
(On) indicates momentary position., Off indicates a mechanical position with no electrical connection., Omit center terminal.
1
100
1000
10A Field Wiring
110
120
125
13
15A Field Wiring
16
18
2
20
200
20A Field Wiring
24
25
250
2x10
3-Phase Applications
30
300
35
50
500
55
9
Accepts solid or stranded copper wire.
All parts are packaged unassembled., Jackscrews must be purchased separately., Shielded cable clamps will not accept connector housings with clinch nuts.
All plug assemblies are supplied with housing and cover preassembled
All receptacles are preloaded with size 20 DF posted socket contacts
All switches are bottom sealed.
Also available in commercial grade.
Also available in military grade.
Available On-Tape for Automatic Termination.
Bag/Box
Box & Tray, Tray
Box & Tube, Tube
CAUTION: Do not attempt to operate a single-fused model without the fuse door in place!
CSA LE7189, UL E28476
CSA LR7189, UL E28476
Cable clamp/strain relief hardware cannot be used with these arrangements.
Captured Center Contact
Certified
Coaxial contacts must be ordered separately
Complies with IEC 61984 Specification
Connector without Contacts
Contact Extraction/Lance Reset Tool No. 843996-3., No marking on this part number., Strain reliefs are available and may be purchased separately.
Contact Raychem for additional adhesive and/or cut off boot length information
Contacts and sealing plugs packaged separately., Customer/military marking, see drawing.
Contacts can only be used in Metrimate, Series 1 (Arr. 23-24), Series 4 (Arr. 23-13M, 23-16M, 23-22M), and VDE connectors.
Contacts sold separately.
Contacts sold separately., M38999 Style
Crimp Termination
Do not order screw and captive clamp in combination with other top hardware.
Do not order screw and captive clamp in combination with other top hardware., Other options available upon request, consult our Product Information Center.
Each backshell kit includes upper and lower backshells, two spring latches, one strain relief staple and two 2-56 screws. All are packaged unassembled, Meets SCSI-2 standards
Each switch is provided with a disposable boot used only during cleaning operation.
Electrodeposited Tin Plate per MIL-T-10727.
FLK-Wire: Normal Wire
Fits 1U high enclosure.
Flat-rock insertable, See Specific Info Link for information on a PC/104 Extraction Tool.
For 0.63 mm "Round" Post and 0.63 x 0.63 mm "Square" Post.
For Mini Applicator.
For Specific shell size information, refer to Harnware? or Catalog.
For use with CIRH connectors. See catalog for additional product information.
For use with TECIRP connectors., See catalog for additional product information.
HDM Applicator part number ending in -1 is used on AMPOMATOR CLS Machine with T or G Terminators, -2 is used on AMP-O-LECTRIC Model K Machine, -3 is used on AMP-O-LECTRIC Model G Machine.
Hardware not supplied.
Hardware supplied unassembled.
Heatshrink
Heavy Duty for extra mechanical strength
Hermetically Sealed
Hole patterns are required in the top, bottom, front and rear of the enclosure, in order to mount the internal side panels.
If an Insulating Bushing is required, see Part Number 330620.
Insert Receptacle Assembly w/Guide Ribs (only) into shroud.
Insertion equipment available.
Intercontact Keying Plug Part Number 650025-2.
Keyed.
Lead-Free Solderball
Lens sets include, button, diffuser and cap.
Life: 1000000
Loose Piece
M38999 Style
Machine applied applicator required.
Marking: Commercial 22-16- Military 22-18 in accordance with MIL-T-7928.
Max overload voltage 1000V
Max overload voltage 1600V
Max overload voltage 3000V
Max overload voltage 400V
Max overload voltage 800V
Meets or exceeds the requirements of MIL-S-23190, Type I, Class 1.