Notes (page 8 / 8)

Steel accent grommet with red insert.
Steel accent grommet with white insert.
Steel caliper piston.
Steel gromets with black inserts and white stripes.
Steering rack is for right hand drive.
Steering rack is for right hand drive. Does not include air management.
Steering rack is for right hand drive. Includes digital air management with 8 presets.
Steering system is designed for left hand drive vehicles.
Stem - Adjustable
Stem To Chain
Step dish design.
Sterile
Stock ride height supplied spindles. Brake rotor bolt pattern is 5 x 4.75 in.
Straight lower outlet.
Supplied with double spiral locks. .010 deck clearance with 3.480 stroke.
Symmetrical style spokes.
TPI.
The finishes US3A and US5A are unlacquered and will change over time. Items received may not match sample displays.
The lower mounting hardware bolts into existing locations. The included hood mounting hardware requires use of the included special multi-grip rivets to attach ball stud brackets.
The nose of this unit is extended by 0.750" to provide more pinion support engagement and stability, reducing pinion deflection, gear wear, and noise.
The paint applied to these headers is a temporary coating only and is designed to burn off during use. High temperature paint or other high temperature coatings are recommended.
This brake hose meets strict guidelines established by D.O.T MVSS-571.106.
This helmet is pre-drilled for head and neck restraint hardware.
This is designed to be used as a rear tire.
This kit includes 120 series premium brake rotors and 105 series posi-quiet premium ceramic brake pads with hardware and shims.
This kit includes 125 Series premium high-carbon brake rotors and 104 Series posi-quiet premium metallic brake pads with hardware and shims.
This tire is designed for use as a front tire only.
This tire is designed for use as a rear tire only.
Tire is designed for use as a rear tire.
Top and bottom bosses on these batwings are thicker than OEM, which prevents the use of OEM spring perches.
Total bed replacement typically uses 5 pieces.
Total bed replacement typically uses 6 pieces.
Total bed replacement typically uses 7 pieces.
Trim ring and center cap not included.
Trim ring not included.
Trunk mat only.
Two door kit includes mats for both driver and passenger doors interior and seam tape.
Two door kit includes mats for both driver and passenger doors interior, seam tape, and roller.
Two kits required to complete installation.
UL Listed
USP-Grade
Universal fit catalytic converters may require the use of welding, cutting, and tube-bending equipment for installation. Tuning may be required when changing catalytic converters.
Use a spray-on sealer like K&W Copper Coat or Permatex Copper Spray-a-Gasket when installing. Re-torque the bolts/nuts after several warm-up/cool-down cycles.
Uses 14mm spark plugs with 3/4" reach, and flat gasket seals
Value line part.
Value when rated block capacity is AC 220 V
Verify the ring doesn't stand proud of the groove before installation.
Vertical heat seam lines.
Vintage style vinyl.
W/Clips
WISSOTA Certified
Wheel has chrome lip.
Wheel has over-sized 1.500 in. diameter thick grip.
Wheel includes black anodized single beadlock ring designed for MT bead style.
Wheel includes black anodized single beadlock ring designed for MT bead style. High brake clearance design.
Wheel includes black anodized single beadlock ring designed for MT bead style. High pad mounting design.
Wheel includes black anodized single beadlock ring designed for MT bead style. Low pad mounting design.
Wheel includes black anodized single beadlock ring designed for MT bead style. Medium brake clearance design.
Wheel includes black anodized single beadlock ring designed for MT bead style. Medium pad mounting design.
Wheel includes polished single beadlock ring designed for use with MT style beads.
Wheel includes polished single beadlock ring designed for use with MT style beads. High brake clearance design.
Wheel includes polished single beadlock ring designed for use with MT style beads. High pad mounting design.
Wheel includes polished single beadlock ring designed for use with MT style beads. Low brake clearance design.
Wheel includes polished single beadlock ring designed for use with MT style beads. Low pad mounting design.
Wheel includes polished single beadlock ring designed for use with MT style beads. Medium brake clearance design.
Wheel includes polished single beadlock ring designed for use with MT style beads. Medium pad mounting design.
Wheel uses the stock Pontiac Formula/Trans Am horn cover assembly and bolts directly to the 6-bolt steering adapters.
Wheel uses the stock fit 1963-75 and 1977-83 (will not fit 1976) Corvette horn cover assembly and bolts directly to the 6-bolt steering adapters. Wheel has the thin 0.875 in. diameter grip.
When working, always wear protective clothing such as safety helmet, safety glasses, etc.
White stitching with black grommets and white inserts.
White stitching with black grommets.
White stitching with brass grommets and white inserts.
White stitching with steel grommets and white inserts.
White stitching.
White stitching. For use on models without airbags in the seats.
Will not work with RAM couplers.
Wires route over valve covers.
With Comfortweave inserts and stripes on rear seat.
With Comfortweave inserts.
With Kiwi inserts.
With Madrid grain.
With Ruffino inserts.
With antenna pocket and two mirror pockets.
With comfortweave inserts.
With non-folding 53 in. wide rear seat.
With one mirror pocket.
With two mirror pockets.
Without antenna pocket, with two mirror pockets.
Without mirror pockets
Without mirror pockets.
Wrist pin features diamond-like carbon (DLC) coating.
Wrist pin is chamfered.